Search   
MSDS 
:
 Acetoacetanilide, 99%
CAS 
:
 102-01-2
SYNONYMS 
:
 AAA
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 102-01-2 |Acetoacetanilide | 99 | 202-996-4 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully
investigated.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
Ingestion of large amounts may cause gastrointestinal irritation.
The toxicological properties of this substance have not been fully
investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes.
Ingestion:
Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or
alcohol-resistant foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up, then place into a suitable container for
disposal.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Avoid contact with eyes, skin, and clothing. Avoid
ingestion and inhalation.
Storage:
Store in a cool, dry place. Keep container closed when not in use.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate general or local exhaust ventilation to keep airborne
concentrations below the permissible exposure limits.
Exposure Limits
CAS# 102-01-2:

Russia: 1 mg/m3 TWA

Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves and clothing to
prevent skin exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: white
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: @ 760.00mm Hg
Freezing/Melting Point: 85 - 86 deg C
Autoignition Temperature: 450 deg C ( 842.00 deg F)
Flash Point: 162 deg C ( 323.60 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: 5 g/l (20 c)
Specific Gravity/Density: 1.1 @ 85C
Molecular Formula: CH3COCH2CONHC6H5
Molecular Weight: 177.20

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, irritating and toxic fumes and
gases, carbon dioxide, nitrogen.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 102-01-2: AK4200000
LD50/LC50:
CAS# 102-01-2: Dermal, guinea pig: LD50 = >1 gm/kg; Oral, mouse:
LD50 = 3400 mg/kg; Oral, rabbit: LD50 = 3925 mg/kg; Oral, rat: LD50 =
2450 mg/kg.
Carcinogenicity:
Acetoacetanilide -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
IMO
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
RID/ADR
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing group:

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 102-01-2: 1
Canada
CAS# 102-01-2 is listed on Canada's DSL List.
CAS# 102-01-2 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 102-01-2 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #2 Date: 6/17/2002

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
2-Amino-4-Chlorobenzothiazole, 97% 19952-47-7
Lead(II) perchlorate trihydrate 13453-62-8
Palladium(ii)acetylacetonate, 35% pd 14024-61-4
Ethylenediaminetetraacetic Acid, Dicalcium Salt, 94% (Titr.) 19709-85-4
2-Benzoyl-5-norbornene, tech., 90% mixture of endo and exo 6056-35-5
alpha-Toluenethiol, 99% (gc) 100-53-8
Acid yellow 17 6359-98-4
1H-pyrrole-2,5-dicarboxaldehyde, 94% (gc)
1-Ethyl-2-pyrrolidinone, 98% 2687-91-4
Iodo-PDSMTSC-Iron(IV) complex 0-00-0
Acetoacetanilide, 99% 102-01-2
2,2-Dichloro-1,4-Butanediol, 99% 0-00-1
Tetra-N-Pentylcalix[4]Resorcinolarene, 97% (TLC) 118629-59-7
Ethyl Nipecotate, 97% 71962-74-8
3,5-Dimethoxy-4-Hydroxycinnamic Acid, 98%, Predominantly Trans Isomer 530-59-6
Trioctylpropylammonium Chloride (Pract), 95% (Titr.) 40739-43-3
Isonicotinic Acid, 99% 55-22-1
Diethyl Terephthalate, 98% (GC) 636-09-9
7-Methoxy-2-tetralone, 95% 4133-34-0
Thallic acetate, 98% (GC) 2570-63-0
Isobutylamine, 99% 78-81-9
1-(3-Chlorophenyl)Piperazine Hydrochloride ,95%(HPLC) 65369-76-8
cis-2-Amino-1-cyclohexanecarboxylic acid 98% 5691-20-3
Chloroacetic acid sodium salt, 98% (titr.) 3926-62-3
Pyridinium chlorochromate, 98% 26299-14-9
2-(Phenylsulfonyl)aniline, 99% 4273-98-7
2-Methylbenzylamine, 96% 89-93-0
(R)-(-)-Citramalic Acid, 98+% 6236-10-8
4-Pentenoic acid, 99% 591-80-0
Citraconic Acid, 99+% 498-23-7
Palladium hydroxide on carbon powder, 20% pd, moisture ca 50% 12135-22-7
n-Hexadecyl mercaptan, tech., 92% 2917-26-2
Methylcyclopentane, 99+% 96-37-7
Epiandrosterone, 99% (HP:C) 481-29-8
2,3,4,5,6,6-Hexachloro-2,4-Cyclohexadien-1-One,99% 21306-21-8
Tributyl phosphite, 94% 102-85-2
4-Carboxybenzenesulfonamide, 98% 138-41-0
Propargyltriphenylphosphonium Bromide,99+% 2091-46-5
N-Methylhydroxylamine hydrochloride, 98% 4229-44-1
D,L-2-pyrrolidone-5-carboxylic acid,98% 149-87-1
Peanut Oil 8002-03-7
Diisopropyl Azodicarboxylate, 97% 2446-83-5
DL-2-Pentanol 6032-29-7
3,4,5-Trichloroaniline, 97% 634-91-3
Cyanourea, Sodium Salt, 98% 76989-89-4
4-Chlorophenylacetic Acid, 98% (GC) 1878-66-6
3-Fluorophenylacetonitrile, 99+% 501-00-8
Decahydroquinoline, 98%, Mixture of Cis and Trans 2051-28-7
Diphenylmethane, P.A. 101-81-5
Trans 2, cis 6-Nonadienal 557-48-2

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net