Search   
MSDS 
:
 Palladium hydroxide on carbon powder, 20%  pd, moisture ca 50%
CAS 
:
 12135-22-7
SYNONYMS 
:
 Pearlman's catalyst
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 12135-22-7 |Palladium hydroxide on carbon powder | | 235-219-2 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully
investigated.Air sensitive.

Potential Health Effects
Eye:
Dust may cause mechanical irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause digestive tract disturbances. The toxicological properties
of this substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
Antidote:
None reported.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up or absorb material, then place into a
suitable clean, dry, closed container for disposal. Avoid generating
dusty conditions. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Minimize dust generation and accumulation. Avoid contact with eyes,
skin, and clothing. Keep container tightly closed. Avoid ingestion
and inhalation.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 12135-22-7:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: black
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: N/A
Explosion Limits, upper: N/A
Decomposition Temperature: >100 deg C
Solubility in water: insoluble
Specific Gravity/Density:
Molecular Formula: Pd(OH)2
Molecular Weight: 140.4128

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stability unknown.
Conditions to Avoid:
Incompatible materials, dust generation, exposure to air.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 12135-22-7 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Palladium hydroxide on carbon powder -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Other
No information available.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
S 28A After contact with skin, wash immediately with
plenty of water.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 12135-22-7: No information available.
Canada
CAS# 12135-22-7 is listed on Canada's NDSL List.
CAS# 12135-22-7 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 12135-22-7 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 11/24/1998 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
2-Amino-4-Chlorobenzothiazole, 97% 19952-47-7
Lead(II) perchlorate trihydrate 13453-62-8
Palladium(ii)acetylacetonate, 35% pd 14024-61-4
Ethylenediaminetetraacetic Acid, Dicalcium Salt, 94% (Titr.) 19709-85-4
2-Benzoyl-5-norbornene, tech., 90% mixture of endo and exo 6056-35-5
alpha-Toluenethiol, 99% (gc) 100-53-8
Acid yellow 17 6359-98-4
1H-pyrrole-2,5-dicarboxaldehyde, 94% (gc)
1-Ethyl-2-pyrrolidinone, 98% 2687-91-4
Iodo-PDSMTSC-Iron(IV) complex 0-00-0
Acetoacetanilide, 99% 102-01-2
2,2-Dichloro-1,4-Butanediol, 99% 0-00-1
Tetra-N-Pentylcalix[4]Resorcinolarene, 97% (TLC) 118629-59-7
Ethyl Nipecotate, 97% 71962-74-8
3,5-Dimethoxy-4-Hydroxycinnamic Acid, 98%, Predominantly Trans Isomer 530-59-6
Trioctylpropylammonium Chloride (Pract), 95% (Titr.) 40739-43-3
Isonicotinic Acid, 99% 55-22-1
Diethyl Terephthalate, 98% (GC) 636-09-9
7-Methoxy-2-tetralone, 95% 4133-34-0
Thallic acetate, 98% (GC) 2570-63-0
Isobutylamine, 99% 78-81-9
1-(3-Chlorophenyl)Piperazine Hydrochloride ,95%(HPLC) 65369-76-8
cis-2-Amino-1-cyclohexanecarboxylic acid 98% 5691-20-3
Chloroacetic acid sodium salt, 98% (titr.) 3926-62-3
Pyridinium chlorochromate, 98% 26299-14-9
2-(Phenylsulfonyl)aniline, 99% 4273-98-7
2-Methylbenzylamine, 96% 89-93-0
(R)-(-)-Citramalic Acid, 98+% 6236-10-8
4-Pentenoic acid, 99% 591-80-0
Citraconic Acid, 99+% 498-23-7
Palladium hydroxide on carbon powder, 20% pd, moisture ca 50% 12135-22-7
n-Hexadecyl mercaptan, tech., 92% 2917-26-2
Methylcyclopentane, 99+% 96-37-7
Epiandrosterone, 99% (HP:C) 481-29-8
2,3,4,5,6,6-Hexachloro-2,4-Cyclohexadien-1-One,99% 21306-21-8
Tributyl phosphite, 94% 102-85-2
4-Carboxybenzenesulfonamide, 98% 138-41-0
Propargyltriphenylphosphonium Bromide,99+% 2091-46-5
N-Methylhydroxylamine hydrochloride, 98% 4229-44-1
D,L-2-pyrrolidone-5-carboxylic acid,98% 149-87-1
Peanut Oil 8002-03-7
Diisopropyl Azodicarboxylate, 97% 2446-83-5
DL-2-Pentanol 6032-29-7
3,4,5-Trichloroaniline, 97% 634-91-3
Cyanourea, Sodium Salt, 98% 76989-89-4
4-Chlorophenylacetic Acid, 98% (GC) 1878-66-6
3-Fluorophenylacetonitrile, 99+% 501-00-8
Decahydroquinoline, 98%, Mixture of Cis and Trans 2051-28-7
Diphenylmethane, P.A. 101-81-5
Trans 2, cis 6-Nonadienal 557-48-2

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net