Search   
MSDS 
:
 Chloroacetic acid sodium salt, 98% (titr.)
CAS 
:
 3926-62-3
SYNONYMS 
:
 
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 3926-62-3 |Sodium chloroacetate | 98.0 | 223-498-3 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: T N
Risk Phrases: 25 38 50

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Toxic if swallowed. Irritating to skin. Very toxic to aquatic
organisms.Hygroscopic (absorbs moisture from the air).The
toxicological properties of this material have not been fully
investigated.

Potential Health Effects
Eye:
May cause eye irritation. May cause temporary corneal clouding and
ulceration.
Skin:
No information regarding skin irritation and other potential effects
was found.
Ingestion:
Harmful if swallowed. The toxicological properties of this substance
have not been fully investigated.
Inhalation:
Inhalation of dust may cause respiratory tract irritation.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use foam, dry chemical, or carbon dioxide.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Sweep up or absorb material, then place into a suitable clean, dry,
closed container for disposal. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Avoid contact with
eyes, skin, and clothing. Keep container tightly closed. Do not
ingest or inhale.
Storage:
Keep container closed when not in use. Store in a tightly closed
container. Store in a cool, dry, well-ventilated area away from
incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 3926-62-3:


Personal Protective Equipment

Eyes:
Wear chemical splash goggles. Wear appropriate
protective eyeglasses or chemical safety goggles as
described by OSHA's eye and face protection
regulations in 29 CFR 1910.133 or European Standard
EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Powder
Color: colorless
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 0 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: 200 deg C
Solubility in water: Soluble.
Specific Gravity/Density:
Molecular Formula: C2H2ClNaO2
Molecular Weight: 116.48

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, dust generation, strong oxidants.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Chlorine, irritating and toxic fumes and gases, toxic fumes of sodium
oxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 3926-62-3: AG1400000
LD50/LC50:
CAS# 3926-62-3: Oral, mouse: LD50 = 165 mg/kg; Oral, rabbit: LD50 =
156 mg/kg; Oral, rat: LD50 = 95 mg/kg.
Carcinogenicity:
Sodium chloroacetate -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: SODIUM CHLOROACETATE
Hazard Class: 6.1
UN Number: 2659
Packing Group: III
IMO
Shipping Name: SODIUM CHLOROACETATE
Hazard Class: 6.1
UN Number: 2659
Packing Group: III
RID/ADR
Shipping Name: SODIUM CHLOROACETATE
Hazard Class: 6.1
UN Number: 2659
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: T N
Risk Phrases:
R 25 Toxic if swallowed.
R 38 Irritating to skin.
R 50 Very toxic to aquatic organisms.
Safety Phrases:
S 22 Do not breathe dust.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
S 61 Avoid release to the environment. Refer to
special instructions/safety data sheets.
WGK (Water Danger/Protection)
CAS# 3926-62-3: 2
Canada
CAS# 3926-62-3 is listed on Canada's DSL List.
CAS# 3926-62-3 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 3926-62-3 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 5/12/1998 Revision #4 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
2-Amino-4-Chlorobenzothiazole, 97% 19952-47-7
Lead(II) perchlorate trihydrate 13453-62-8
Palladium(ii)acetylacetonate, 35% pd 14024-61-4
Ethylenediaminetetraacetic Acid, Dicalcium Salt, 94% (Titr.) 19709-85-4
2-Benzoyl-5-norbornene, tech., 90% mixture of endo and exo 6056-35-5
alpha-Toluenethiol, 99% (gc) 100-53-8
Acid yellow 17 6359-98-4
1H-pyrrole-2,5-dicarboxaldehyde, 94% (gc)
1-Ethyl-2-pyrrolidinone, 98% 2687-91-4
Iodo-PDSMTSC-Iron(IV) complex 0-00-0
Acetoacetanilide, 99% 102-01-2
2,2-Dichloro-1,4-Butanediol, 99% 0-00-1
Tetra-N-Pentylcalix[4]Resorcinolarene, 97% (TLC) 118629-59-7
Ethyl Nipecotate, 97% 71962-74-8
3,5-Dimethoxy-4-Hydroxycinnamic Acid, 98%, Predominantly Trans Isomer 530-59-6
Trioctylpropylammonium Chloride (Pract), 95% (Titr.) 40739-43-3
Isonicotinic Acid, 99% 55-22-1
Diethyl Terephthalate, 98% (GC) 636-09-9
7-Methoxy-2-tetralone, 95% 4133-34-0
Thallic acetate, 98% (GC) 2570-63-0
Isobutylamine, 99% 78-81-9
1-(3-Chlorophenyl)Piperazine Hydrochloride ,95%(HPLC) 65369-76-8
cis-2-Amino-1-cyclohexanecarboxylic acid 98% 5691-20-3
Chloroacetic acid sodium salt, 98% (titr.) 3926-62-3
Pyridinium chlorochromate, 98% 26299-14-9
2-(Phenylsulfonyl)aniline, 99% 4273-98-7
2-Methylbenzylamine, 96% 89-93-0
(R)-(-)-Citramalic Acid, 98+% 6236-10-8
4-Pentenoic acid, 99% 591-80-0
Citraconic Acid, 99+% 498-23-7
Palladium hydroxide on carbon powder, 20% pd, moisture ca 50% 12135-22-7
n-Hexadecyl mercaptan, tech., 92% 2917-26-2
Methylcyclopentane, 99+% 96-37-7
Epiandrosterone, 99% (HP:C) 481-29-8
2,3,4,5,6,6-Hexachloro-2,4-Cyclohexadien-1-One,99% 21306-21-8
Tributyl phosphite, 94% 102-85-2
4-Carboxybenzenesulfonamide, 98% 138-41-0
Propargyltriphenylphosphonium Bromide,99+% 2091-46-5
N-Methylhydroxylamine hydrochloride, 98% 4229-44-1
D,L-2-pyrrolidone-5-carboxylic acid,98% 149-87-1
Peanut Oil 8002-03-7
Diisopropyl Azodicarboxylate, 97% 2446-83-5
DL-2-Pentanol 6032-29-7
3,4,5-Trichloroaniline, 97% 634-91-3
Cyanourea, Sodium Salt, 98% 76989-89-4
4-Chlorophenylacetic Acid, 98% (GC) 1878-66-6
3-Fluorophenylacetonitrile, 99+% 501-00-8
Decahydroquinoline, 98%, Mixture of Cis and Trans 2051-28-7
Diphenylmethane, P.A. 101-81-5
Trans 2, cis 6-Nonadienal 557-48-2

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net