Search   
MSDS 
:
 Isobutylamine, 99%
CAS 
:
 78-81-9
SYNONYMS 
:
 1-Amino-2-methylpropane
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 78-81-9 |Isobutylamine | 99 | 201-145-4 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: F C
Risk Phrases: 11 22 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Highly flammable. Harmful if swallowed. Causes burns.

Potential Health Effects
Eye:
Causes eye irritation.
Skin:
Causes severe skin irritation. May cause blistering of the skin.
Ingestion:
Harmful if swallowed. Causes gastrointestinal irritation with
nausea, vomiting and diarrhea.
Inhalation:
Causes respiratory tract irritation. Vapors may cause dizziness or
suffocation. Inhalation can cause headache and dryness of nose and
throat.
Chronic:
Not available.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Vapors may form an explosive mixture with air.
Vapors can travel to a source of ignition and flash back. Use water
spray to keep fire-exposed containers cool. Extremely flammable
liquid and vapor. Containers may explode in the heat of a fire.
Vapors may be heavier than air. They can spread along the ground
and collect in low or confined areas. Will be easily ignited by
heat, sparks or flame.
Extinguishing Media:
For small fires, use dry chemical, carbon dioxide, water spray or
alcohol-resistant foam. For large fires, use water spray, fog, or
alcohol-resistant foam. Use water spray to cool fire-exposed
containers. Water may be ineffective. Do NOT use straight streams of
water.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Remove all sources of ignition.
Use a spark-proof tool. Provide ventilation. A vapor suppressing
foam may be used to reduce vapors.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use only in a well-ventilated area.
Ground and bond containers when transferring material. Avoid contact
with eyes, skin, and clothing. Empty containers retain product
residue, (liquid and/or vapor), and can be dangerous. Keep container
tightly closed. Keep away from heat, sparks and flame. Avoid
ingestion and inhalation. Do not pressurize, cut, weld, braze,
solder, drill, grind, or expose empty containers to heat, sparks or
open flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.
Flammables-area.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 78-81-9:

Germany: 5 ppm TWA; 15 mg/m3 TWA
Germany: Skin absorber

Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: colorless
Odor: None reported.
pH: Not available.
Vapor Pressure: 135 hPa @ 20 C
Viscosity: 0.6 mPas 20 deg C
Boiling Point: 64 - 71 deg C @ 760.00mm Hg
Freezing/Melting Point: -85 deg C
Autoignition Temperature: 400 deg C ( 752.00 deg F)
Flash Point: -9 deg C ( 15.80 deg F)
Explosion Limits, lower: 1.90 vol %
Explosion Limits, upper: 10.80 vol %
Decomposition Temperature:
Solubility in water: Miscible.
Specific Gravity/Density: .7360g/cm3
Molecular Formula: C4H11N
Molecular Weight: 73.13

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, ignition sources, excess heat, strong
oxidants, electrical sparks, exposure to flame.
Incompatibilities with Other Materials:
Alkali metals, copper, copper alloys, halogens, organic acids,
phenols, vinyl acetate, epichlorohydrin, alcohols and glycols (e.g.
butyl alcohol, ethanol, methanol, ethylene glycol), aldehydes (e.g.
acetaldehyde, acrolein, chloral hydrate, formaldehyde), isocyanates
(e.g. methyl isocyanate), ketones (e.g. acetone, acetophenone, MEK,
MIBK), organic anhydrides, mineral acids.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, irritating and toxic fumes and
gases, carbon dioxide, nitrogen.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 78-81-9: NP9900000
LD50/LC50:
CAS# 78-81-9: Oral, rat: LD50 = 224 mg/kg.
Carcinogenicity:
Isobutylamine -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: ISOBUTYLAMINE
Hazard Class: 3 (8)
UN Number: 1214
Packing Group: II
IMO
Shipping Name: ISOBUTYLAMINE
Hazard Class: 3.2 (8)
UN Number: 1214
Packing Group: II
RID/ADR
Shipping Name: ISOBUTYLAMINE
Hazard Class: 3
UN Number: 1214
Packing group: II
USA RQ: CAS# 78-81-9: 1000 lb final RQ (Listed under Butylamine); 454 kg final R

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: F C
Risk Phrases:
R 11 Highly flammable.
R 22 Harmful if swallowed.
R 34 Causes burns.
Safety Phrases:
S 16 Keep away from sources of ignition - No
smoking.
S 25 Avoid contact with eyes.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 78-81-9: 2
Canada
CAS# 78-81-9 is listed on Canada's DSL List.
CAS# 78-81-9 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 78-81-9 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 6/30/1998 Revision #3 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
2-Amino-4-Chlorobenzothiazole, 97% 19952-47-7
Lead(II) perchlorate trihydrate 13453-62-8
Palladium(ii)acetylacetonate, 35% pd 14024-61-4
Ethylenediaminetetraacetic Acid, Dicalcium Salt, 94% (Titr.) 19709-85-4
2-Benzoyl-5-norbornene, tech., 90% mixture of endo and exo 6056-35-5
alpha-Toluenethiol, 99% (gc) 100-53-8
Acid yellow 17 6359-98-4
1H-pyrrole-2,5-dicarboxaldehyde, 94% (gc)
1-Ethyl-2-pyrrolidinone, 98% 2687-91-4
Iodo-PDSMTSC-Iron(IV) complex 0-00-0
Acetoacetanilide, 99% 102-01-2
2,2-Dichloro-1,4-Butanediol, 99% 0-00-1
Tetra-N-Pentylcalix[4]Resorcinolarene, 97% (TLC) 118629-59-7
Ethyl Nipecotate, 97% 71962-74-8
3,5-Dimethoxy-4-Hydroxycinnamic Acid, 98%, Predominantly Trans Isomer 530-59-6
Trioctylpropylammonium Chloride (Pract), 95% (Titr.) 40739-43-3
Isonicotinic Acid, 99% 55-22-1
Diethyl Terephthalate, 98% (GC) 636-09-9
7-Methoxy-2-tetralone, 95% 4133-34-0
Thallic acetate, 98% (GC) 2570-63-0
Isobutylamine, 99% 78-81-9
1-(3-Chlorophenyl)Piperazine Hydrochloride ,95%(HPLC) 65369-76-8
cis-2-Amino-1-cyclohexanecarboxylic acid 98% 5691-20-3
Chloroacetic acid sodium salt, 98% (titr.) 3926-62-3
Pyridinium chlorochromate, 98% 26299-14-9
2-(Phenylsulfonyl)aniline, 99% 4273-98-7
2-Methylbenzylamine, 96% 89-93-0
(R)-(-)-Citramalic Acid, 98+% 6236-10-8
4-Pentenoic acid, 99% 591-80-0
Citraconic Acid, 99+% 498-23-7
Palladium hydroxide on carbon powder, 20% pd, moisture ca 50% 12135-22-7
n-Hexadecyl mercaptan, tech., 92% 2917-26-2
Methylcyclopentane, 99+% 96-37-7
Epiandrosterone, 99% (HP:C) 481-29-8
2,3,4,5,6,6-Hexachloro-2,4-Cyclohexadien-1-One,99% 21306-21-8
Tributyl phosphite, 94% 102-85-2
4-Carboxybenzenesulfonamide, 98% 138-41-0
Propargyltriphenylphosphonium Bromide,99+% 2091-46-5
N-Methylhydroxylamine hydrochloride, 98% 4229-44-1
D,L-2-pyrrolidone-5-carboxylic acid,98% 149-87-1
Peanut Oil 8002-03-7
Diisopropyl Azodicarboxylate, 97% 2446-83-5
DL-2-Pentanol 6032-29-7
3,4,5-Trichloroaniline, 97% 634-91-3
Cyanourea, Sodium Salt, 98% 76989-89-4
4-Chlorophenylacetic Acid, 98% (GC) 1878-66-6
3-Fluorophenylacetonitrile, 99+% 501-00-8
Decahydroquinoline, 98%, Mixture of Cis and Trans 2051-28-7
Diphenylmethane, P.A. 101-81-5
Trans 2, cis 6-Nonadienal 557-48-2

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net