**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 591-80-0 |4-Pentenoic acid | 99 | 209-732-7 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 22 34
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Harmful if swallowed. Causes burns.Corrosive.
Potential Health Effects
Eye:
Causes eye burns. May cause chemical conjunctivitis and corneal
damage.
Skin:
Causes skin burns. May cause cyanosis of the extremities. May cause
skin rash (in milder cases), and cold and clammy skin with cyanosis
or pale color.
Ingestion:
May cause severe and permanent damage to the digestive tract. Causes
gastrointestinal tract burns. May cause perforation of the digestive
tract. May be harmful if swallowed.
Inhalation:
Causes chemical burns to the respiratory tract. Inhalation may be
fatal as a result of spasm, inflammation, edema of the larynx and
bronchi, chemical pneumonitis and pulmonary edema. May cause
systemic effects. May cause burning sensation, coughing, wheezing,
laryngitis, shortness of breath, headache, nausea, and vomiting.
Inhalation at high concentrations may cause CNS depression and
asphixiation.
Chronic:
Effects may be delayed.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately. Do NOT allow victim to rub eyes or keep eyes closed.
Extensive irrigation with water is required (at least 30 minutes).
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes. Wash clothing before reuse. Destroy contaminated shoes.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid immediately. Do NOT induce vomiting. If conscious and alert,
rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If breathing is difficult, give oxygen. Do not use
mouth-to-mouth resuscitation if victim ingested or inhaled the
substance; induce artificial respiration with the aid of a pocket
mask equipped with a one-way valve or other proper respiratory
medical device.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Use water
spray to keep fire-exposed containers cool. Combustible liquid.
Vapors may be heavier than air. They can spread along the ground and
collect in low or confined areas. Containers may explode when heated.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or
alcohol-resistant foam. Use water spray to cool fire-exposed
containers. Water may be ineffective.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Remove all sources of ignition. Use
a spark-proof tool. Provide ventilation.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Do not get in eyes, on skin, or on clothing. Empty
containers retain product residue, (liquid and/or vapor), and can be
dangerous. Keep away from heat, sparks and flame. Do not ingest or
inhale. Use only in a chemical fume hood. Discard contaminated shoes.
Do not pressurize, cut, weld, braze, solder, drill, grind, or expose
empty containers to heat, sparks or open flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances. Corrosives
area.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate general or
local explosion-proof ventilation to keep airborne levels to
acceptable levels.
Exposure Limits
CAS# 591-80-0:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Clear liquid
Color: clear, colorless
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 83 - 84 deg C @ 12.00mm Hg
Freezing/Melting Point: -22.5 deg C
Autoignition Temperature: Not applicable.
Flash Point: 89 deg C ( 192.20 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Not available.
Specific Gravity/Density: .9810g/cm3
Molecular Formula: C5H8O2
Molecular Weight: 100.20
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, ignition sources, excess heat.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong bases, strong reducing agents.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide.
Hazardous Polymerization: Has not been reported.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 591-80-0: SB2800000
LD50/LC50:
CAS# 591-80-0: Oral, mouse: LD50 = 610 mg/kg; Oral, rat: LD50 = 470
mg/kg.
Carcinogenicity:
4-Pentenoic acid -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S.*
Hazard Class: 8
UN Number: 3265
Packing Group: III
IMO
Shipping Name: CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S.
Hazard Class: 8
UN Number: 3265
Packing Group: III
RID/ADR
Shipping Name: CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S.
Hazard Class: 8
UN Number: 3265
Packing group: III
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 22 Harmful if swallowed.
R 34 Causes burns.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 28A After contact with skin, wash immediately with
plenty of water.
WGK (Water Danger/Protection)
CAS# 591-80-0: No information available.
Canada
CAS# 591-80-0 is listed on Canada's DSL List.
CAS# 591-80-0 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 591-80-0 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 9/02/1997 Revision #5 Date: 3/18/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
2-Amino-4-Chlorobenzothiazole, 97%
| 19952-47-7 |
|
Lead(II) perchlorate trihydrate
| 13453-62-8 |
|
Palladium(ii)acetylacetonate, 35% pd
| 14024-61-4 |
|
Ethylenediaminetetraacetic Acid, Dicalcium Salt, 94% (Titr.)
| 19709-85-4 |
|
2-Benzoyl-5-norbornene, tech., 90% mixture of endo and exo
| 6056-35-5 |
|
alpha-Toluenethiol, 99% (gc)
| 100-53-8 |
|
Acid yellow 17
| 6359-98-4 |
|
1H-pyrrole-2,5-dicarboxaldehyde, 94% (gc)
| |
|
1-Ethyl-2-pyrrolidinone, 98%
| 2687-91-4 |
|
Iodo-PDSMTSC-Iron(IV) complex
| 0-00-0 |
|
Acetoacetanilide, 99%
| 102-01-2 |
|
2,2-Dichloro-1,4-Butanediol, 99%
| 0-00-1 |
|
Tetra-N-Pentylcalix[4]Resorcinolarene, 97% (TLC)
| 118629-59-7 |
|
Ethyl Nipecotate, 97%
| 71962-74-8 |
|
3,5-Dimethoxy-4-Hydroxycinnamic Acid, 98%, Predominantly Trans Isomer
| 530-59-6 |
|
Trioctylpropylammonium Chloride (Pract), 95% (Titr.)
| 40739-43-3 |
|
Isonicotinic Acid, 99%
| 55-22-1 |
|
Diethyl Terephthalate, 98% (GC)
| 636-09-9 |
|
7-Methoxy-2-tetralone, 95%
| 4133-34-0 |
|
Thallic acetate, 98% (GC)
| 2570-63-0 |
|
Isobutylamine, 99%
| 78-81-9 |
|
1-(3-Chlorophenyl)Piperazine Hydrochloride ,95%(HPLC)
| 65369-76-8 |
|
cis-2-Amino-1-cyclohexanecarboxylic acid 98%
| 5691-20-3 |
|
Chloroacetic acid sodium salt, 98% (titr.)
| 3926-62-3 |
|
Pyridinium chlorochromate, 98%
| 26299-14-9 |
|
2-(Phenylsulfonyl)aniline, 99%
| 4273-98-7 |
|
2-Methylbenzylamine, 96%
| 89-93-0 |
|
(R)-(-)-Citramalic Acid, 98+%
| 6236-10-8 |
|
4-Pentenoic acid, 99%
| 591-80-0 |
|
Citraconic Acid, 99+%
| 498-23-7 |
|
Palladium hydroxide on carbon powder, 20% pd, moisture ca 50%
| 12135-22-7 |
|
n-Hexadecyl mercaptan, tech., 92%
| 2917-26-2 |
|
Methylcyclopentane, 99+%
| 96-37-7 |
|
Epiandrosterone, 99% (HP:C)
| 481-29-8 |
|
2,3,4,5,6,6-Hexachloro-2,4-Cyclohexadien-1-One,99%
| 21306-21-8 |
|
Tributyl phosphite, 94%
| 102-85-2 |
|
4-Carboxybenzenesulfonamide, 98%
| 138-41-0 |
|
Propargyltriphenylphosphonium Bromide,99+%
| 2091-46-5 |
|
N-Methylhydroxylamine hydrochloride, 98%
| 4229-44-1 |
|
D,L-2-pyrrolidone-5-carboxylic acid,98%
| 149-87-1 |
|
Peanut Oil
| 8002-03-7 |
|
Diisopropyl Azodicarboxylate, 97%
| 2446-83-5 |
|
DL-2-Pentanol
| 6032-29-7 |
|
3,4,5-Trichloroaniline, 97%
| 634-91-3 |
|
Cyanourea, Sodium Salt, 98%
| 76989-89-4 |
|
4-Chlorophenylacetic Acid, 98% (GC)
| 1878-66-6 |
|
3-Fluorophenylacetonitrile, 99+%
| 501-00-8 |
|
Decahydroquinoline, 98%, Mixture of Cis and Trans
| 2051-28-7 |
|
Diphenylmethane, P.A.
| 101-81-5 |
|
Trans 2, cis 6-Nonadienal
| 557-48-2 |
|
|