Search   
MSDS 
:
 Phenylacetic acid, 98.5%
CAS 
:
 103-82-2
SYNONYMS 
:
 Phenylethanoic acid; Benzeneacetic acid; alpha-Toluic acid;     omega-Phenylacetic acid.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 103-82-2 |Phenylacetic acid | 100 | 203-148-6
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.

Potential Health Effects
Eye:
Causes eye irritation.
Skin:
Causes skin irritation.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea.
Inhalation:
Causes respiratory tract irritation.
Chronic:
Effects may be delayed.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid. Do
NOT allow victim to rub or keep eyes closed.
Skin:
Get medical aid. Flush skin with plenty of soap and water for at
least 15 minutes while removing contaminated clothing and shoes. Wash
clothing before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure to fresh air immediately. If not breathing,
give artificial respiration. If breathing is difficult, give oxygen.
Get medical aid. Do NOT use mouth-to-mouth resuscitation.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Dusts at sufficient concentrations can form
explosive mixtures with air. During a fire, irritating and highly
toxic gases may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Clean up spills immediately, observing precautions in the
Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Minimize dust generation and accumulation. Avoid
contact with eyes, skin, and clothing. Keep container tightly closed.
Use with adequate ventilation. Avoid breathing dust.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances. Keep away
from strong bases.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Always use
a NIOSH or European Standard EN 149 approved
respirator when necessary.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Crystals
Color: white
Odor: floral-like - Concentrated solution smells bad.
pH: Not available.
Vapor Pressure: 0.0038 mm Hg @ 25 deg C
Viscosity: Not available.
Boiling Point: 265.5 deg C
Freezing/Melting Point: 76.5 deg C
Autoignition Temperature: Not available.
Flash Point: > 100 deg C (> 212.00 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Soluble.
Specific Gravity/Density: 1.0809
Molecular Formula: C8H8O2
Molecular Weight: 136.15

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Dust generation, excess heat.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong reducing agents, strong bases.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 103-82-2: AJ2430000
LD50/LC50:
CAS# 103-82-2: Draize test, rabbit, eye: 100 mg/24H Moderate; Oral,
mouse: LD50 = 2250 mg/kg; Oral, rat: LD50 = 2250 mg/kg; Skin,
rabbit: LD50 = >5 gm/kg.
Carcinogenicity:
Phenylacetic acid -
Not listed by ACGIH, IARC, NIOSH, NTP, or OSHA.
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
IMO
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
RID/ADR
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing group:

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 22 Do not breathe dust.
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 103-82-2: 1
United Kingdom Occupational Exposure Limits

United Kingdom Maximum Exposure Limits

Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 103-82-2 is not listed on Canada's Ingredient Disclosure List.
Exposure Limits
US FEDERAL
TSCA
CAS# 103-82-2 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 7/08/1998 Revision #4 Date: 11/20/2002

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
tert-Butyl (2S,3S)-3-Amino-2-Hydroxy-3-Phenylpropanoate, 97% 0-01-1
Diethyl-5-amino-3-methyl-2,4-thiophene-dicarboxylate, 97% 4815-30-9
tert-Butyl (2R,3R)-3-amino-2-hydroxy-3-phenylpropanoate, 97% 135981-02-1
tert-Butyl (2R,3S)-3-Amino-2-Hydroxy-4-Phenylbutanoate, 97% 119626-06-1
tert-Butyl (2S,3R)-3-Amino-2-Hydroxy-4-Phenylbutanoate, 97% 0-01-1
tert-Butyl (2S,3S)-3-Amino-2-Hydroxybutanoate, 97% 0-01-1
tert-Butyl (2R,3R)-3-Amino-2-Hydroxybutanoate, 97% 204587-91-7
Allyl(chloromethyl)dimethylsilane, 96% 75422-66-1
Phenol, 99+%, Loose Crystals, Biochemical Grade 108-95-2
Allyldichloromethylsilane, 97% 1873-92-3
Dichloromethyloctadecylsilane, 95% 5157-75-5
Chlorocyclohexyldimethylsilane, 97% 71864-47-6
Chloromethylphenylsilane, 98% 1631-82-9
Diethylmethylsilane, 97% 760-32-7
1,1-Dichlorosilacyclobutane, 97% 2351-33-9
1,1-Bis(trichlorosilylmethyl)ethylene 78948-04-6
Phenol, Reagent ACS 108-95-2
1,6-Bis(trichlorosilyl)hexane, 97% 13083-94-8
Tris(trimethylsilyl)germanium hydride, 96% 104164-54-7
2-Amino-1,3,4-Thiadiazole, 97% 4005-51-0
1,2-Epoxydecane, 96% 2404-44-6
1,2-Epoxyoctane, 96% 2984-50-1
Phenolphthalein, Reagent ACS 77-09-8
Phenol red, indicator 143-74-8
Phenylacetic acid, 98.5% 103-82-2
Phosphoric acid, reagent ACS, 85+% 7664-38-2
1,2-Epoxydodecane, 96% 2855-19-8
Ammonium Citrate Dibasic 3012-65-5
TRIS-(TRIMETHYLSILYLOXY)-ETHYLENE, 95% 69097-20-7
1-Trimethylsilyloxy-1,3-butadiene 6651-43-0
Phosphorus Pentoxide, P.A. 1314-56-3
1,1,5-Triacetoxy-2,2-dichloropentane, 97% 0-01-1
4-(Hydroxymethyl)imidazole hydrochloride, 99% 32673-41-9
Phosphorus Oxychloride, Reagent, 99+% (Titr.) 10025-87-3
DL-4-Hydroxy-3-Methoxyphenylglycol, Piperazine Salt, Tech., 90% 67423-45-4
Phosphotungstic Acid Hydrate, p.a. 12067-99-1
o-Phthalaldehyde, 98% (gc) 643-79-8
Ammonium dichromate 7789-09-5
Picric Acid, Reagent ACS 88-89-1
(4R)-N-(tert.-Butyldimethylsilyl)azetidin-2-one-4-carboxylic acid, 162856-35-1
(1R,2R)-Diaminomethylcyclohexane, 95% 68737-65-5
Piperidine, 99% 110-89-4
(R)-(-)-2-Amino-6-Phosphonohexanoic Acid, 95% (97%e.e.) 131177-53-2
1-Methyladenine, 99% 5142-22-3
Potassium hexachloroplatinate(iv) ca.40% pt 16921-30-5
(-)-Dibutyl-D-tartrate 0-01-1
Poly(Ethylene Glycol), Average M.W. 400 25322-68-3
Dioctyl phthalate, 99+% 117-81-7
Poly(Ethylene Glycol), Average M.W. 600 25322-68-3
(Carboethoxymethyl)Triphenylphosphonium Chloride Hydrate, 97% 17577-28-5

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net