Search   
MSDS 
:
 1,1-Bis(trichlorosilylmethyl)ethylene
CAS 
:
 78948-04-6
SYNONYMS 
:
 (2-Methylene-1,3-propanediyl)bis(trichlorosilane
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 78948-04-6 |1,1-Bis(trichlorosilylmethyl)ethylene | | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 14 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Reacts violently with water. Causes burns.

Potential Health Effects
Eye:
Causes eye burns.
Skin:
Causes skin burns.
Ingestion:
Causes gastrointestinal tract burns. The toxicological properties of
this substance have not been fully investigated.
Inhalation:
Causes chemical burns to the respiratory tract. The toxicological
properties of this substance have not been fully investigated.
Chronic:
Not available.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Get medical aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Water Reactive. Material will react with water and
may release a flammable and/or toxic gas. Combustible liquid.
Extinguishing Media:
Use foam, dry chemical, or carbon dioxide. DO NOT USE WATER!

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Do not breathe dust, vapor, mist, or gas. Do not get in eyes, on
skin, or on clothing.
Storage:
Keep away from sources of ignition. Store in a cool, dry place.
Store in a tightly closed container. Corrosives area. Store under an
inert atmosphere.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 78948-04-6:


Personal Protective Equipment

Eyes:
Not available.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: light yellow
Odor: acrid odor
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 240 - 242 deg C @ 7
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: 81 deg C ( 177.80 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: reacts with water
Specific Gravity/Density: 1.4100g/cm3
Molecular Formula: Cl3SiCH2C(CH2)CH2SiCl3
Molecular Weight: 322.98

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, exposure to moist air or water.
Incompatibilities with Other Materials:
Oxidizing agents, acids, bases, alcohols, amines.
Hazardous Decomposition Products:
Hydrogen chloride, carbon monoxide, carbon dioxide, silicon dioxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 78948-04-6 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
1,1-Bis(trichlorosilylmethyl)ethylene -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
No information available.
IMO
No information available.
RID/ADR
No information available.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 14 Reacts violently with water.
R 34 Causes burns.
Safety Phrases:
S 8 Keep container dry.
S 25 Avoid contact with eyes.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 78948-04-6: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 78948-04-6 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 78948-04-6 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 2/01/1999 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
tert-Butyl (2S,3S)-3-Amino-2-Hydroxy-3-Phenylpropanoate, 97% 0-01-1
Diethyl-5-amino-3-methyl-2,4-thiophene-dicarboxylate, 97% 4815-30-9
tert-Butyl (2R,3R)-3-amino-2-hydroxy-3-phenylpropanoate, 97% 135981-02-1
tert-Butyl (2R,3S)-3-Amino-2-Hydroxy-4-Phenylbutanoate, 97% 119626-06-1
tert-Butyl (2S,3R)-3-Amino-2-Hydroxy-4-Phenylbutanoate, 97% 0-01-1
tert-Butyl (2S,3S)-3-Amino-2-Hydroxybutanoate, 97% 0-01-1
tert-Butyl (2R,3R)-3-Amino-2-Hydroxybutanoate, 97% 204587-91-7
Allyl(chloromethyl)dimethylsilane, 96% 75422-66-1
Phenol, 99+%, Loose Crystals, Biochemical Grade 108-95-2
Allyldichloromethylsilane, 97% 1873-92-3
Dichloromethyloctadecylsilane, 95% 5157-75-5
Chlorocyclohexyldimethylsilane, 97% 71864-47-6
Chloromethylphenylsilane, 98% 1631-82-9
Diethylmethylsilane, 97% 760-32-7
1,1-Dichlorosilacyclobutane, 97% 2351-33-9
1,1-Bis(trichlorosilylmethyl)ethylene 78948-04-6
Phenol, Reagent ACS 108-95-2
1,6-Bis(trichlorosilyl)hexane, 97% 13083-94-8
Tris(trimethylsilyl)germanium hydride, 96% 104164-54-7
2-Amino-1,3,4-Thiadiazole, 97% 4005-51-0
1,2-Epoxydecane, 96% 2404-44-6
1,2-Epoxyoctane, 96% 2984-50-1
Phenolphthalein, Reagent ACS 77-09-8
Phenol red, indicator 143-74-8
Phenylacetic acid, 98.5% 103-82-2
Phosphoric acid, reagent ACS, 85+% 7664-38-2
1,2-Epoxydodecane, 96% 2855-19-8
Ammonium Citrate Dibasic 3012-65-5
TRIS-(TRIMETHYLSILYLOXY)-ETHYLENE, 95% 69097-20-7
1-Trimethylsilyloxy-1,3-butadiene 6651-43-0
Phosphorus Pentoxide, P.A. 1314-56-3
1,1,5-Triacetoxy-2,2-dichloropentane, 97% 0-01-1
4-(Hydroxymethyl)imidazole hydrochloride, 99% 32673-41-9
Phosphorus Oxychloride, Reagent, 99+% (Titr.) 10025-87-3
DL-4-Hydroxy-3-Methoxyphenylglycol, Piperazine Salt, Tech., 90% 67423-45-4
Phosphotungstic Acid Hydrate, p.a. 12067-99-1
o-Phthalaldehyde, 98% (gc) 643-79-8
Ammonium dichromate 7789-09-5
Picric Acid, Reagent ACS 88-89-1
(4R)-N-(tert.-Butyldimethylsilyl)azetidin-2-one-4-carboxylic acid, 162856-35-1
(1R,2R)-Diaminomethylcyclohexane, 95% 68737-65-5
Piperidine, 99% 110-89-4
(R)-(-)-2-Amino-6-Phosphonohexanoic Acid, 95% (97%e.e.) 131177-53-2
1-Methyladenine, 99% 5142-22-3
Potassium hexachloroplatinate(iv) ca.40% pt 16921-30-5
(-)-Dibutyl-D-tartrate 0-01-1
Poly(Ethylene Glycol), Average M.W. 400 25322-68-3
Dioctyl phthalate, 99+% 117-81-7
Poly(Ethylene Glycol), Average M.W. 600 25322-68-3
(Carboethoxymethyl)Triphenylphosphonium Chloride Hydrate, 97% 17577-28-5

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net