Search   
MSDS 
:
 Allyldichloromethylsilane, 97%
CAS 
:
 1873-92-3
SYNONYMS 
:
 
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 1873-92-3 |Allyldichloromethylsilane | 97 | 217-498-2 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: F C
Risk Phrases: 11 14 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Highly flammable. Reacts violently with water. Causes burns.

Potential Health Effects
Eye:
Causes eye burns.
Skin:
Causes skin burns.
Ingestion:
Causes gastrointestinal tract burns. The toxicological properties of
this substance have not been fully investigated.
Inhalation:
Causes chemical burns to the respiratory tract. The toxicological
properties of this substance have not been fully investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
In case of contact, immediately flush eyes with plenty of water for
at least 15 minutes. Get medical aid immediately.
Skin:
In case of contact, immediately flush skin with plenty of water for
at least 15 minutes while removing contaminated clothing and shoes.
Get medical aid immediately. Wash clothing before reuse.
Ingestion:
If swallowed, do NOT induce vomiting. Get medical aid immediately.
If victim is fully conscious, give a cupful of water. Never give
anything by mouth to an unconscious person.
Inhalation:
If inhaled, remove to fresh air. If not breathing, give artificial
respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Vapors can travel to a source of ignition and flash
back. Water Reactive. Material will react with water and may release
a flammable and/or toxic gas. Containers may explode in the heat of
a fire. Flammable liquid and vapor.
Extinguishing Media:
Use foam, dry chemical, or carbon dioxide. DO NOT USE WATER!

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Remove all sources of ignition.
Use a spark-proof tool. Provide ventilation. Do not expose spill to
water.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Use spark-proof tools and explosion proof equipment. Do not breathe
dust, vapor, mist, or gas. Do not get in eyes, on skin, or on
clothing. Use only in a chemical fume hood.
Storage:
Keep away from sources of ignition. Store in a cool, dry place.
Store in a tightly closed container. Keep away from water.
Flammables-area. Store under an inert atmosphere.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 1873-92-3:


Personal Protective Equipment

Eyes:
Wear chemical splash goggles.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: Clear
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 119-120 deg C
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: 20 deg C ( 68.00 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: reacts with water
Specific Gravity/Density: 1.0670g/cm3
Molecular Formula: CH2CHCH2Si(CH3)Cl2
Molecular Weight: 155.10

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, ignition sources, exposure to moist air or
water.
Incompatibilities with Other Materials:
Oxidizing agents, acids, bases, alcohols, amines, ammonia, peroxides,
aldehydes (e.g. acetaldehyde, acrolein, chloral hydrate,
formaldehyde), ketones (e.g. acetone, acetophenone, MEK, MIBK).
Hazardous Decomposition Products:
Hydrogen chloride, carbon monoxide, carbon dioxide, silicon dioxide.
Hazardous Polymerization: Will not occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 1873-92-3 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Allyldichloromethylsilane -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: Chlorosilanes, Flammable, Corrosive, N.O.S.
Hazard Class: 3
UN Number: 2985
Packing Group: II
IMO
Shipping Name: Chlorosilanes, Flammable, Corrosive, N.O.S.
Hazard Class: 3
UN Number: 2985
Packing Group: II
RID/ADR
Shipping Name: Chlorosilanes, Flammable, Corrosive, N.O.S.
Hazard Class: 3
UN Number: 2985
Packing group:

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: F C
Risk Phrases:
R 11 Highly flammable.
R 14 Reacts violently with water.
R 34 Causes burns.
Safety Phrases:
S 8 Keep container dry.
S 16 Keep away from sources of ignition - No
smoking.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 1873-92-3: No information available.
Canada
CAS# 1873-92-3 is listed on Canada's NDSL List.
CAS# 1873-92-3 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 1873-92-3 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 2/01/1999 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
tert-Butyl (2S,3S)-3-Amino-2-Hydroxy-3-Phenylpropanoate, 97% 0-01-1
Diethyl-5-amino-3-methyl-2,4-thiophene-dicarboxylate, 97% 4815-30-9
tert-Butyl (2R,3R)-3-amino-2-hydroxy-3-phenylpropanoate, 97% 135981-02-1
tert-Butyl (2R,3S)-3-Amino-2-Hydroxy-4-Phenylbutanoate, 97% 119626-06-1
tert-Butyl (2S,3R)-3-Amino-2-Hydroxy-4-Phenylbutanoate, 97% 0-01-1
tert-Butyl (2S,3S)-3-Amino-2-Hydroxybutanoate, 97% 0-01-1
tert-Butyl (2R,3R)-3-Amino-2-Hydroxybutanoate, 97% 204587-91-7
Allyl(chloromethyl)dimethylsilane, 96% 75422-66-1
Phenol, 99+%, Loose Crystals, Biochemical Grade 108-95-2
Allyldichloromethylsilane, 97% 1873-92-3
Dichloromethyloctadecylsilane, 95% 5157-75-5
Chlorocyclohexyldimethylsilane, 97% 71864-47-6
Chloromethylphenylsilane, 98% 1631-82-9
Diethylmethylsilane, 97% 760-32-7
1,1-Dichlorosilacyclobutane, 97% 2351-33-9
1,1-Bis(trichlorosilylmethyl)ethylene 78948-04-6
Phenol, Reagent ACS 108-95-2
1,6-Bis(trichlorosilyl)hexane, 97% 13083-94-8
Tris(trimethylsilyl)germanium hydride, 96% 104164-54-7
2-Amino-1,3,4-Thiadiazole, 97% 4005-51-0
1,2-Epoxydecane, 96% 2404-44-6
1,2-Epoxyoctane, 96% 2984-50-1
Phenolphthalein, Reagent ACS 77-09-8
Phenol red, indicator 143-74-8
Phenylacetic acid, 98.5% 103-82-2
Phosphoric acid, reagent ACS, 85+% 7664-38-2
1,2-Epoxydodecane, 96% 2855-19-8
Ammonium Citrate Dibasic 3012-65-5
TRIS-(TRIMETHYLSILYLOXY)-ETHYLENE, 95% 69097-20-7
1-Trimethylsilyloxy-1,3-butadiene 6651-43-0
Phosphorus Pentoxide, P.A. 1314-56-3
1,1,5-Triacetoxy-2,2-dichloropentane, 97% 0-01-1
4-(Hydroxymethyl)imidazole hydrochloride, 99% 32673-41-9
Phosphorus Oxychloride, Reagent, 99+% (Titr.) 10025-87-3
DL-4-Hydroxy-3-Methoxyphenylglycol, Piperazine Salt, Tech., 90% 67423-45-4
Phosphotungstic Acid Hydrate, p.a. 12067-99-1
o-Phthalaldehyde, 98% (gc) 643-79-8
Ammonium dichromate 7789-09-5
Picric Acid, Reagent ACS 88-89-1
(4R)-N-(tert.-Butyldimethylsilyl)azetidin-2-one-4-carboxylic acid, 162856-35-1
(1R,2R)-Diaminomethylcyclohexane, 95% 68737-65-5
Piperidine, 99% 110-89-4
(R)-(-)-2-Amino-6-Phosphonohexanoic Acid, 95% (97%e.e.) 131177-53-2
1-Methyladenine, 99% 5142-22-3
Potassium hexachloroplatinate(iv) ca.40% pt 16921-30-5
(-)-Dibutyl-D-tartrate 0-01-1
Poly(Ethylene Glycol), Average M.W. 400 25322-68-3
Dioctyl phthalate, 99+% 117-81-7
Poly(Ethylene Glycol), Average M.W. 600 25322-68-3
(Carboethoxymethyl)Triphenylphosphonium Chloride Hydrate, 97% 17577-28-5

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net