Search   
MSDS 
:
 Tridecanal, tech., 90% (gc)
CAS 
:
 10486-19-8
SYNONYMS 
:
 
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 10486-19-8 |Tridecanal | | 234-004-0 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully
investigated.Air sensitive.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
The toxicological properties of this substance have not been fully
investigated.
Inhalation:
May cause respiratory tract irritation.
Chronic:
Not available.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Flush skin with plenty of water for at least 15 minutes while
removing contaminated clothing and shoes. Get medical aid if
irritation develops or persists.
Ingestion:
Get medical aid. Wash mouth out with water.
Inhalation:
Remove from exposure and move to fresh air immediately. Get medical
aid if cough or other symptoms appear.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear.
Extinguishing Media:
Use water spray, dry chemical, or foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Avoid breathing dust, vapor, mist, or gas. Avoid contact with skin
and eyes.
Storage:
Store in a cool, dry place. Store in a tightly closed container.
Keep under a nitrogen blanket. Keep refrigerated. (Store below
4C/39F.)

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower.
Exposure Limits
CAS# 10486-19-8:


Personal Protective Equipment

Eyes:
Wear chemical splash goggles.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear a chemical apron.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear faint yellow
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 132 - 136 deg C @ 8.00mm Hg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: > 110 deg C (> 230.00 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: .8350g/cm3
Molecular Formula: C13H26O
Molecular Weight: 198.35

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Not available.
Conditions to Avoid:
Exposure to air.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong bases, air.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 10486-19-8 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Tridecanal -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 10486-19-8: No information available.
Canada
CAS# 10486-19-8 is listed on Canada's DSL List.
CAS# 10486-19-8 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 10486-19-8 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Fast Green FCF (Cert) 2353-45-9
Sodium Tetraborate Decahydrate, Reagent ACS 1303-96-4
Rose bengal (techn), 60% (grav.) 632-69-9
Sodium Tetraborate Decahydrate, P.A. 1303-96-4
n-Phenylglycine, 93% 103-01-5
Sodium Tetraborate Decahydrate, Reagent ACS (Powder) 1303-96-4
n-Tosylpyrrole, 99+% 17639-64-4
Copper (II) Acetate Monohydrate, P.A. 6046-93-1
Copper (II) Acetate Monohydrate, Reagent ACS 6046-93-1
Maleimide, 90-95% (titr.), balance mainly volatiles 541-59-3
d-(+)-Allose 2595-97-3
n-Butyl nitrite, stabilized, 95% 544-16-1
Tridecanal, tech., 90% (gc) 10486-19-8
Tetrabutylammonium hydroxide titrant (0.4m in water), hplc grade 2052-49-5
Tetrabutylammonium hydroxide, 40 wt% solution in water 2052-49-5
Tetrabutylammonium hydroxide, 0.1N solution in toluene/methanol for 67-56-1
Methyl alcohol, 99.9%, spectrophotometric grade 67-56-1
Boron trichloride, 1M solution in hexane 110-54-3
Methyl alcohol, for HPLC 67-56-1
Methyl Alcohol, Dried; Maximum Water Content 0.02% 67-56-1
Methyl alcohol, 99+% 67-56-1
Dodecyl sulfate, lithium salt 2044-56-6
Methyl alcohol, p.a. 67-56-1
Nitronium tetrafluoroborate, 0.5m solution in sulfolane 126-33-0
Dodecyl Sulfate Sodium Salt Electrophoresis Grade, 98% (GC) 151-21-3
Methyl alcohol, reagent ACS, 99.8%, spectrophotometric grade 67-56-1
Methyl alcohol, reagent ACS, 99.8% 67-56-1
Methyl alcohol-d, 99.00 atom % D 67-56-1
Poly(vinyl chloride), carboxylated, average M.W. 200,000, average 25702-80-1
Malachite Green Oxalate, High Purity Biological Stain 2437-29-8
Guanosine, 99% (UV-Vis) 118-00-3
Methyl-d3 alcohol-d, 100.0 atom % D 67-56-1
Methyl-d3 alcohol-d, packaged in 0.50 ml ampules, 100.0 atom % D 67-56-1
Poly(dimethylsiloxane), secondary standard , typical M.W. 93700, 9016-00-6
Poly(dimethylsiloxane), secondary standard typical M.W. 273.500, 9016-00-6
4-Methylphthalic Anhydride, 96% (Titr.) 19438-61-0
2-Undecanone, 97.5% (GC) 112-12-9
Isonicotinic Acid Hydrazide, 99% 54-85-3
Triethyl phosphonoacetate, 98.5% (gc) 867-13-0
Trans-1,4-Cyclohexanedimethanol, 98% (GC) 105-08-8
l-Threo-tert-butylserine monohydrate
Poly(isobutylene), approximate MW 840,000 9003-27-4
Poly(isobutylene), approximate MW 900,000 9003-27-4
Terephthaldehyde monodiethylacetal, 97% stabilized with 0.1% 121-44-8
Tyramine hydrochloride, >99% (titr.) 60-19-5
Poly(isobutylene), approximate MW 1,400,000 9003-27-4
Poly(isobutylene), approximate MW 4,700,000 9003-27-4
p-Morpholinoaniline, 97.3% 2524-67-6
6-Methoxy-2-tetralone, 95% 2472-22-2
D-Methionine Methylsulfonium Bromide, 99%

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net