**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 2524-67-6 |p-Morpholinoaniline | 97.3% | 219-760-1 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/37/38
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.
Potential Health Effects
Eye:
Causes eye irritation.
Skin:
Causes skin irritation.
Ingestion:
Causes gastrointestinal irritation with nausea, vomiting and
diarrhea.
Inhalation:
Causes respiratory tract irritation.
Chronic:
Not available.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Flush skin with plenty of water for at least 15 minutes while
removing contaminated clothing and shoes. Get medical aid if
irritation develops or persists. Wash clothing before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Wash mouth out with water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid if cough or other symptoms appear.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or chemical foam.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Avoid generating dusty conditions. Provide ventilation.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Minimize dust generation and accumulation. Avoid breathing dust,
vapor, mist, or gas. Avoid contact with eyes, skin, and clothing.
Keep container tightly closed. Avoid ingestion and inhalation.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower.
Exposure Limits
CAS# 2524-67-6:
Personal Protective Equipment
Eyes:
Wear chemical splash goggles.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear a chemical apron.
Respirators:
A NIOSH/MSHA approved air purifying dust or mist
respirator or European Standard EN 149.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Solid
Color: light red to brown
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 132 - 135 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: N/A
Explosion Limits, upper: N/A
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C10H14N2O
Molecular Weight: 178.23
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, dust generation.
Incompatibilities with Other Materials:
Acids, acid chlorides, acid anhydrides, chloroformates, strong
oxidizing agents.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 2524-67-6 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
p-Morpholinoaniline -
Not listed by ACGIH, IARC, or NTP.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 37/39 Wear suitable gloves and eye/face
protection.
WGK (Water Danger/Protection)
CAS# 2524-67-6: No information available.
Canada
CAS# 2524-67-6 is listed on Canada's NDSL List.
CAS# 2524-67-6 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 2524-67-6 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 2/09/1999 Revision #2 Date: 3/18/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
Fast Green FCF (Cert)
| 2353-45-9 |
|
Sodium Tetraborate Decahydrate, Reagent ACS
| 1303-96-4 |
|
Rose bengal (techn), 60% (grav.)
| 632-69-9 |
|
Sodium Tetraborate Decahydrate, P.A.
| 1303-96-4 |
|
n-Phenylglycine, 93%
| 103-01-5 |
|
Sodium Tetraborate Decahydrate, Reagent ACS (Powder)
| 1303-96-4 |
|
n-Tosylpyrrole, 99+%
| 17639-64-4 |
|
Copper (II) Acetate Monohydrate, P.A.
| 6046-93-1 |
|
Copper (II) Acetate Monohydrate, Reagent ACS
| 6046-93-1 |
|
Maleimide, 90-95% (titr.), balance mainly volatiles
| 541-59-3 |
|
d-(+)-Allose
| 2595-97-3 |
|
n-Butyl nitrite, stabilized, 95%
| 544-16-1 |
|
Tridecanal, tech., 90% (gc)
| 10486-19-8 |
|
Tetrabutylammonium hydroxide titrant (0.4m in water), hplc grade
| 2052-49-5 |
|
Tetrabutylammonium hydroxide, 40 wt% solution in water
| 2052-49-5 |
|
Tetrabutylammonium hydroxide, 0.1N solution in toluene/methanol for
| 67-56-1 |
|
Methyl alcohol, 99.9%, spectrophotometric grade
| 67-56-1 |
|
Boron trichloride, 1M solution in hexane
| 110-54-3 |
|
Methyl alcohol, for HPLC
| 67-56-1 |
|
Methyl Alcohol, Dried; Maximum Water Content 0.02%
| 67-56-1 |
|
Methyl alcohol, 99+%
| 67-56-1 |
|
Dodecyl sulfate, lithium salt
| 2044-56-6 |
|
Methyl alcohol, p.a.
| 67-56-1 |
|
Nitronium tetrafluoroborate, 0.5m solution in sulfolane
| 126-33-0 |
|
Dodecyl Sulfate Sodium Salt Electrophoresis Grade, 98% (GC)
| 151-21-3 |
|
Methyl alcohol, reagent ACS, 99.8%, spectrophotometric grade
| 67-56-1 |
|
Methyl alcohol, reagent ACS, 99.8%
| 67-56-1 |
|
Methyl alcohol-d, 99.00 atom % D
| 67-56-1 |
|
Poly(vinyl chloride), carboxylated, average M.W. 200,000, average
| 25702-80-1 |
|
Malachite Green Oxalate, High Purity Biological Stain
| 2437-29-8 |
|
Guanosine, 99% (UV-Vis)
| 118-00-3 |
|
Methyl-d3 alcohol-d, 100.0 atom % D
| 67-56-1 |
|
Methyl-d3 alcohol-d, packaged in 0.50 ml ampules, 100.0 atom % D
| 67-56-1 |
|
Poly(dimethylsiloxane), secondary standard , typical M.W. 93700,
| 9016-00-6 |
|
Poly(dimethylsiloxane), secondary standard typical M.W. 273.500,
| 9016-00-6 |
|
4-Methylphthalic Anhydride, 96% (Titr.)
| 19438-61-0 |
|
2-Undecanone, 97.5% (GC)
| 112-12-9 |
|
Isonicotinic Acid Hydrazide, 99%
| 54-85-3 |
|
Triethyl phosphonoacetate, 98.5% (gc)
| 867-13-0 |
|
Trans-1,4-Cyclohexanedimethanol, 98% (GC)
| 105-08-8 |
|
l-Threo-tert-butylserine monohydrate
| |
|
Poly(isobutylene), approximate MW 840,000
| 9003-27-4 |
|
Poly(isobutylene), approximate MW 900,000
| 9003-27-4 |
|
Terephthaldehyde monodiethylacetal, 97% stabilized with 0.1%
| 121-44-8 |
|
Tyramine hydrochloride, >99% (titr.)
| 60-19-5 |
|
Poly(isobutylene), approximate MW 1,400,000
| 9003-27-4 |
|
Poly(isobutylene), approximate MW 4,700,000
| 9003-27-4 |
|
p-Morpholinoaniline, 97.3%
| 2524-67-6 |
|
6-Methoxy-2-tetralone, 95%
| 2472-22-2 |
|
D-Methionine Methylsulfonium Bromide, 99%
| |
|
|