Search   
MSDS 
:
 Trans-1,4-Cyclohexanedimethanol, 98% (GC)
CAS 
:
 105-08-8
SYNONYMS 
:
 1,4-Bis(Hydroxymethyl)-Cyclohexane ; CHDM
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 105-08-8 |Trans-1,4-Cyclohexanedimethanol | 98 | 203-268-9 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Not available.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract.
Inhalation:
May cause respiratory tract irritation. Low hazard for usual
industrial handling.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Flush skin with plenty of water for at least 15 minutes while
removing contaminated clothing and shoes. Get medical aid if
irritation develops or persists.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water. Wash mouth out with water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid if cough or other symptoms appear.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Use water
spray to keep fire-exposed containers cool. Vapors may be heavier
than air. They can spread along the ground and collect in low or
confined areas. Containers may explode when heated.
Extinguishing Media:
Use water spray, dry chemical, or carbon dioxide. Use agent most
appropriate to extinguish fire. Cool containers with flooding
quantities of water until well after fire is out.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Avoid runoff into storm sewers and ditches which lead to waterways.
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up or absorb material, then place into a
suitable clean, dry, closed container for disposal. Provide
ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash hands before eating. Use with adequate ventilation. Avoid
breathing dust, vapor, mist, or gas. Avoid contact with skin and
eyes. Keep container tightly closed. Wash clothing before reuse.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate general or
local exhaust ventilation to keep airborne concentrations below the
permissible exposure limits.
Exposure Limits
CAS# 105-08-8:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear a chemical apron. Wear appropriate clothing to
prevent skin exposure.
Respirators:
A NIOSH/MSHA approved air purifying dust or mist
respirator or European Standard EN 149.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: white
Odor: Not available.
pH: Not available.
Vapor Pressure: 1 mm Hg @ 96 deg C
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 58 deg C
Autoignition Temperature: Not available.
Flash Point: > 109 deg C (> 228.20 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: soluble
Specific Gravity/Density: 1.0200g/cm3
Molecular Formula: C8H16O2
Molecular Weight: 144.21

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, dust generation, excess heat.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide.
Hazardous Polymerization: Will not occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 105-08-8: GU9800000
LD50/LC50:
CAS# 105-08-8: Oral, mouse: LD50 = 1600 mg/kg; Oral, rat: LD50 =
3200 mg/kg.
Carcinogenicity:
Trans-1,4-Cyclohexanedimethanol -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 105-08-8: 1
Canada
CAS# 105-08-8 is listed on Canada's DSL List.
CAS# 105-08-8 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 105-08-8 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 2/10/1999 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Fast Green FCF (Cert) 2353-45-9
Sodium Tetraborate Decahydrate, Reagent ACS 1303-96-4
Rose bengal (techn), 60% (grav.) 632-69-9
Sodium Tetraborate Decahydrate, P.A. 1303-96-4
n-Phenylglycine, 93% 103-01-5
Sodium Tetraborate Decahydrate, Reagent ACS (Powder) 1303-96-4
n-Tosylpyrrole, 99+% 17639-64-4
Copper (II) Acetate Monohydrate, P.A. 6046-93-1
Copper (II) Acetate Monohydrate, Reagent ACS 6046-93-1
Maleimide, 90-95% (titr.), balance mainly volatiles 541-59-3
d-(+)-Allose 2595-97-3
n-Butyl nitrite, stabilized, 95% 544-16-1
Tridecanal, tech., 90% (gc) 10486-19-8
Tetrabutylammonium hydroxide titrant (0.4m in water), hplc grade 2052-49-5
Tetrabutylammonium hydroxide, 40 wt% solution in water 2052-49-5
Tetrabutylammonium hydroxide, 0.1N solution in toluene/methanol for 67-56-1
Methyl alcohol, 99.9%, spectrophotometric grade 67-56-1
Boron trichloride, 1M solution in hexane 110-54-3
Methyl alcohol, for HPLC 67-56-1
Methyl Alcohol, Dried; Maximum Water Content 0.02% 67-56-1
Methyl alcohol, 99+% 67-56-1
Dodecyl sulfate, lithium salt 2044-56-6
Methyl alcohol, p.a. 67-56-1
Nitronium tetrafluoroborate, 0.5m solution in sulfolane 126-33-0
Dodecyl Sulfate Sodium Salt Electrophoresis Grade, 98% (GC) 151-21-3
Methyl alcohol, reagent ACS, 99.8%, spectrophotometric grade 67-56-1
Methyl alcohol, reagent ACS, 99.8% 67-56-1
Methyl alcohol-d, 99.00 atom % D 67-56-1
Poly(vinyl chloride), carboxylated, average M.W. 200,000, average 25702-80-1
Malachite Green Oxalate, High Purity Biological Stain 2437-29-8
Guanosine, 99% (UV-Vis) 118-00-3
Methyl-d3 alcohol-d, 100.0 atom % D 67-56-1
Methyl-d3 alcohol-d, packaged in 0.50 ml ampules, 100.0 atom % D 67-56-1
Poly(dimethylsiloxane), secondary standard , typical M.W. 93700, 9016-00-6
Poly(dimethylsiloxane), secondary standard typical M.W. 273.500, 9016-00-6
4-Methylphthalic Anhydride, 96% (Titr.) 19438-61-0
2-Undecanone, 97.5% (GC) 112-12-9
Isonicotinic Acid Hydrazide, 99% 54-85-3
Triethyl phosphonoacetate, 98.5% (gc) 867-13-0
Trans-1,4-Cyclohexanedimethanol, 98% (GC) 105-08-8
l-Threo-tert-butylserine monohydrate
Poly(isobutylene), approximate MW 840,000 9003-27-4
Poly(isobutylene), approximate MW 900,000 9003-27-4
Terephthaldehyde monodiethylacetal, 97% stabilized with 0.1% 121-44-8
Tyramine hydrochloride, >99% (titr.) 60-19-5
Poly(isobutylene), approximate MW 1,400,000 9003-27-4
Poly(isobutylene), approximate MW 4,700,000 9003-27-4
p-Morpholinoaniline, 97.3% 2524-67-6
6-Methoxy-2-tetralone, 95% 2472-22-2
D-Methionine Methylsulfonium Bromide, 99%

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net