**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 541-59-3 |Maleimide, 90-95% (Titr.), balance mai| 90-95% | 208-787-4 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: T
Risk Phrases: 25 36/37/38 43
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Toxic if swallowed. Irritating to eyes, respiratory system and skin.
May cause sensitization by skin contact.The toxicological properties
of this material have not been fully investigated.
Potential Health Effects
Eye:
Causes eye irritation. Lachrymator (substance which increases the
flow of tears). Lachrymator (substance which increases the flow of
tears).
Skin:
Causes skin irritation. May cause skin sensitization, an allergic
reaction, which becomes evident upon re-exposure to this material.
Ingestion:
May cause irritation of the digestive tract. The toxicological
properties of this substance have not been fully investigated.
Inhalation:
Causes respiratory tract irritation.
Chronic:
No information found.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids.
Skin:
Flush skin with plenty of water for at least 15 minutes while
removing contaminated clothing and shoes.
Ingestion:
Get medical aid. Wash mouth out with water.
Inhalation:
Remove from exposure and move to fresh air immediately.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or chemical foam.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Avoid contact with skin and eyes. Avoid ingestion
and inhalation. Use only in a chemical fume hood.
Storage:
Store in a cool, dry place. Store in a tightly closed container.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use process enclosure,
local exhaust ventilation, or other engineering controls to control
airborne levels.
Exposure Limits
CAS# 541-59-3:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Solid
Color: light yellow
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 92 - 94 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: soluble
Specific Gravity/Density:
Molecular Formula: C4H3NO2
Molecular Weight: 97.07
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Has not been fully evaluated.
Conditions to Avoid:
None reported.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong acids, strong bases, strong reducing
agents.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 541-59-3: ON4800000
LD50/LC50:
CAS# 541-59-3: Oral, mouse: LD50 = 80 mg/kg.
Oral, rat: LD50 = 5-25
Carcinogenicity:
Maleimide, 90-95% (Titr.), balance mainly volatiles -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: TOXIC SOLID, ORGANIC, N.O.S.*
Hazard Class: 6.1
UN Number: 2811
Packing Group: III
IMO
Shipping Name: TOXIC SOLID, ORGANIC, N.O.S.
Hazard Class: 6.1
UN Number: 2811
Packing Group: III
RID/ADR
Shipping Name: TOXIC SOLID, ORGANIC, N.O.S.
Hazard Class: 6.1
UN Number: 2811
Packing group: III
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: T
Risk Phrases:
R 25 Toxic if swallowed.
R 36/37/38 Irritating to eyes, respiratory system
and skin.
R 43 May cause sensitization by skin contact.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 28A After contact with skin, wash immediately with
plenty of water.
S 37/39 Wear suitable gloves and eye/face
protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 541-59-3: 1
Canada
CAS# 541-59-3 is listed on Canada's DSL List.
CAS# 541-59-3 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 541-59-3 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 5/14/1998 Revision #2 Date: 3/18/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
Fast Green FCF (Cert)
| 2353-45-9 |
|
Sodium Tetraborate Decahydrate, Reagent ACS
| 1303-96-4 |
|
Rose bengal (techn), 60% (grav.)
| 632-69-9 |
|
Sodium Tetraborate Decahydrate, P.A.
| 1303-96-4 |
|
n-Phenylglycine, 93%
| 103-01-5 |
|
Sodium Tetraborate Decahydrate, Reagent ACS (Powder)
| 1303-96-4 |
|
n-Tosylpyrrole, 99+%
| 17639-64-4 |
|
Copper (II) Acetate Monohydrate, P.A.
| 6046-93-1 |
|
Copper (II) Acetate Monohydrate, Reagent ACS
| 6046-93-1 |
|
Maleimide, 90-95% (titr.), balance mainly volatiles
| 541-59-3 |
|
d-(+)-Allose
| 2595-97-3 |
|
n-Butyl nitrite, stabilized, 95%
| 544-16-1 |
|
Tridecanal, tech., 90% (gc)
| 10486-19-8 |
|
Tetrabutylammonium hydroxide titrant (0.4m in water), hplc grade
| 2052-49-5 |
|
Tetrabutylammonium hydroxide, 40 wt% solution in water
| 2052-49-5 |
|
Tetrabutylammonium hydroxide, 0.1N solution in toluene/methanol for
| 67-56-1 |
|
Methyl alcohol, 99.9%, spectrophotometric grade
| 67-56-1 |
|
Boron trichloride, 1M solution in hexane
| 110-54-3 |
|
Methyl alcohol, for HPLC
| 67-56-1 |
|
Methyl Alcohol, Dried; Maximum Water Content 0.02%
| 67-56-1 |
|
Methyl alcohol, 99+%
| 67-56-1 |
|
Dodecyl sulfate, lithium salt
| 2044-56-6 |
|
Methyl alcohol, p.a.
| 67-56-1 |
|
Nitronium tetrafluoroborate, 0.5m solution in sulfolane
| 126-33-0 |
|
Dodecyl Sulfate Sodium Salt Electrophoresis Grade, 98% (GC)
| 151-21-3 |
|
Methyl alcohol, reagent ACS, 99.8%, spectrophotometric grade
| 67-56-1 |
|
Methyl alcohol, reagent ACS, 99.8%
| 67-56-1 |
|
Methyl alcohol-d, 99.00 atom % D
| 67-56-1 |
|
Poly(vinyl chloride), carboxylated, average M.W. 200,000, average
| 25702-80-1 |
|
Malachite Green Oxalate, High Purity Biological Stain
| 2437-29-8 |
|
Guanosine, 99% (UV-Vis)
| 118-00-3 |
|
Methyl-d3 alcohol-d, 100.0 atom % D
| 67-56-1 |
|
Methyl-d3 alcohol-d, packaged in 0.50 ml ampules, 100.0 atom % D
| 67-56-1 |
|
Poly(dimethylsiloxane), secondary standard , typical M.W. 93700,
| 9016-00-6 |
|
Poly(dimethylsiloxane), secondary standard typical M.W. 273.500,
| 9016-00-6 |
|
4-Methylphthalic Anhydride, 96% (Titr.)
| 19438-61-0 |
|
2-Undecanone, 97.5% (GC)
| 112-12-9 |
|
Isonicotinic Acid Hydrazide, 99%
| 54-85-3 |
|
Triethyl phosphonoacetate, 98.5% (gc)
| 867-13-0 |
|
Trans-1,4-Cyclohexanedimethanol, 98% (GC)
| 105-08-8 |
|
l-Threo-tert-butylserine monohydrate
| |
|
Poly(isobutylene), approximate MW 840,000
| 9003-27-4 |
|
Poly(isobutylene), approximate MW 900,000
| 9003-27-4 |
|
Terephthaldehyde monodiethylacetal, 97% stabilized with 0.1%
| 121-44-8 |
|
Tyramine hydrochloride, >99% (titr.)
| 60-19-5 |
|
Poly(isobutylene), approximate MW 1,400,000
| 9003-27-4 |
|
Poly(isobutylene), approximate MW 4,700,000
| 9003-27-4 |
|
p-Morpholinoaniline, 97.3%
| 2524-67-6 |
|
6-Methoxy-2-tetralone, 95%
| 2472-22-2 |
|
D-Methionine Methylsulfonium Bromide, 99%
| |
|
|