**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 2052-49-5 |Tetrabutylammonium hydroxide titrant, | ca.100 | 218-147-6 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 34
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Causes burns.Corrosive.
Potential Health Effects
Eye:
Causes eye burns.
Skin:
Causes skin burns.
Ingestion:
May cause severe and permanent damage to the digestive tract. Causes
gastrointestinal tract burns.
Inhalation:
Causes chemical burns to the respiratory tract.
Chronic:
Not available.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately. Do NOT allow victim to rub eyes or keep eyes closed.
Extensive irrigation with water is required (at least 30 minutes).
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes. Wash clothing before reuse. Destroy contaminated shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If breathing is difficult, give oxygen. Do NOT use
mouth-to-mouth resuscitation. If breathing has ceased apply
artificial respiration using oxygen and a suitable mechanical device
such as a bag and a mask.
Notes to Physician:
Antidote:
None reported.
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use foam, dry chemical, or carbon dioxide.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Clean up spills immediately,
observing precautions in the Protective Equipment section. Provide
ventilation.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Avoid contact with eyes, skin, and clothing. Do not breathe dust,
vapor, mist, or gas. Do not get in eyes, on skin, or on clothing.
Keep container tightly closed. Do not ingest or inhale. Use with
adequate ventilation. Use only in a chemical fume hood. Discard
contaminated shoes.
Storage:
Keep container closed when not in use. Store in a tightly closed
container. Store in a cool, dry, well-ventilated area away from
incompatible substances. Corrosives area.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 2052-49-5:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Liquid
Color: Not available.
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: > 110 deg C (> 230.00 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: soluble
Specific Gravity/Density:
Molecular Formula: C16H37NO
Molecular Weight: 259.47
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures. Absorbs carbon
dioxide from the air.
Conditions to Avoid:
Temperatures above 50C (122F).
Incompatibilities with Other Materials:
None reported.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, carbon dioxide.
Hazardous Polymerization: Will not occur.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 2052-49-5: BS5425000
LD50/LC50:
Not available.
Carcinogenicity:
Tetrabutylammonium hydroxide titrant, 0.4 M in water, HPLC G -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
Other
No information available.
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: CORROSIVE LIQUID, BASIC, ORGANIC, N.O.S.*
Hazard Class: 8
UN Number: 3267
Packing Group: II
IMO
Shipping Name: CORROSIVE LIQUID, N.O.S.
Hazard Class: 8
UN Number: 3267
Packing Group: II
RID/ADR
Shipping Name: CORROSIVE LIQUID, BASIC, ORGANIC, N.O.S.
Hazard Class: 8
UN Number: 3267
Packing group: II
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 25 Avoid contact with eyes.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 2052-49-5: No information available.
Canada
CAS# 2052-49-5 is listed on Canada's DSL List.
CAS# 2052-49-5 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 2052-49-5 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 2/03/1999 Revision #2 Date: 3/18/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
Fast Green FCF (Cert)
| 2353-45-9 |
|
Sodium Tetraborate Decahydrate, Reagent ACS
| 1303-96-4 |
|
Rose bengal (techn), 60% (grav.)
| 632-69-9 |
|
Sodium Tetraborate Decahydrate, P.A.
| 1303-96-4 |
|
n-Phenylglycine, 93%
| 103-01-5 |
|
Sodium Tetraborate Decahydrate, Reagent ACS (Powder)
| 1303-96-4 |
|
n-Tosylpyrrole, 99+%
| 17639-64-4 |
|
Copper (II) Acetate Monohydrate, P.A.
| 6046-93-1 |
|
Copper (II) Acetate Monohydrate, Reagent ACS
| 6046-93-1 |
|
Maleimide, 90-95% (titr.), balance mainly volatiles
| 541-59-3 |
|
d-(+)-Allose
| 2595-97-3 |
|
n-Butyl nitrite, stabilized, 95%
| 544-16-1 |
|
Tridecanal, tech., 90% (gc)
| 10486-19-8 |
|
Tetrabutylammonium hydroxide titrant (0.4m in water), hplc grade
| 2052-49-5 |
|
Tetrabutylammonium hydroxide, 40 wt% solution in water
| 2052-49-5 |
|
Tetrabutylammonium hydroxide, 0.1N solution in toluene/methanol for
| 67-56-1 |
|
Methyl alcohol, 99.9%, spectrophotometric grade
| 67-56-1 |
|
Boron trichloride, 1M solution in hexane
| 110-54-3 |
|
Methyl alcohol, for HPLC
| 67-56-1 |
|
Methyl Alcohol, Dried; Maximum Water Content 0.02%
| 67-56-1 |
|
Methyl alcohol, 99+%
| 67-56-1 |
|
Dodecyl sulfate, lithium salt
| 2044-56-6 |
|
Methyl alcohol, p.a.
| 67-56-1 |
|
Nitronium tetrafluoroborate, 0.5m solution in sulfolane
| 126-33-0 |
|
Dodecyl Sulfate Sodium Salt Electrophoresis Grade, 98% (GC)
| 151-21-3 |
|
Methyl alcohol, reagent ACS, 99.8%, spectrophotometric grade
| 67-56-1 |
|
Methyl alcohol, reagent ACS, 99.8%
| 67-56-1 |
|
Methyl alcohol-d, 99.00 atom % D
| 67-56-1 |
|
Poly(vinyl chloride), carboxylated, average M.W. 200,000, average
| 25702-80-1 |
|
Malachite Green Oxalate, High Purity Biological Stain
| 2437-29-8 |
|
Guanosine, 99% (UV-Vis)
| 118-00-3 |
|
Methyl-d3 alcohol-d, 100.0 atom % D
| 67-56-1 |
|
Methyl-d3 alcohol-d, packaged in 0.50 ml ampules, 100.0 atom % D
| 67-56-1 |
|
Poly(dimethylsiloxane), secondary standard , typical M.W. 93700,
| 9016-00-6 |
|
Poly(dimethylsiloxane), secondary standard typical M.W. 273.500,
| 9016-00-6 |
|
4-Methylphthalic Anhydride, 96% (Titr.)
| 19438-61-0 |
|
2-Undecanone, 97.5% (GC)
| 112-12-9 |
|
Isonicotinic Acid Hydrazide, 99%
| 54-85-3 |
|
Triethyl phosphonoacetate, 98.5% (gc)
| 867-13-0 |
|
Trans-1,4-Cyclohexanedimethanol, 98% (GC)
| 105-08-8 |
|
l-Threo-tert-butylserine monohydrate
| |
|
Poly(isobutylene), approximate MW 840,000
| 9003-27-4 |
|
Poly(isobutylene), approximate MW 900,000
| 9003-27-4 |
|
Terephthaldehyde monodiethylacetal, 97% stabilized with 0.1%
| 121-44-8 |
|
Tyramine hydrochloride, >99% (titr.)
| 60-19-5 |
|
Poly(isobutylene), approximate MW 1,400,000
| 9003-27-4 |
|
Poly(isobutylene), approximate MW 4,700,000
| 9003-27-4 |
|
p-Morpholinoaniline, 97.3%
| 2524-67-6 |
|
6-Methoxy-2-tetralone, 95%
| 2472-22-2 |
|
D-Methionine Methylsulfonium Bromide, 99%
| |
|
|