**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 105-46-4 |DL-SEC-BUTYL ACETATE | 99% | 203-300-1 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI F
Risk Phrases: 11 36/37/38
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Highly flammable. Irritating to eyes, respiratory system and skin.
Potential Health Effects
Eye:
Vapors cause eye irritation.
Skin:
Causes skin irritation. Prolonged and/or repeated contact may cause
irritation and/or dermatitis.
Ingestion:
May cause irritation of the digestive tract.
Inhalation:
Causes respiratory tract irritation. Exposure produces central
nervous system depression. Vapor or mist is irritating to the mucous
membranes and upper respiratory tract.
Chronic:
Chronic inhalation may cause effects similar to those of acute
inhalation.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Vapors can travel to a source of ignition and flash
back. During a fire, irritating and highly toxic gases may be
generated by thermal decomposition or combustion. Flammable liquid
and vapor. Vapors may be heavier than air. They can spread along
the ground and collect in low or confined areas.
Extinguishing Media:
Use foam, dry chemical, or carbon dioxide. Water may be ineffective.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Wash area with soap and water.
Remove all sources of ignition. Use a spark-proof tool. Provide
ventilation.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Use spark-proof tools and explosion
proof equipment. Avoid breathing dust, vapor, mist, or gas. Avoid
contact with skin and eyes. Empty containers retain product residue,
(liquid and/or vapor), and can be dangerous. Keep away from heat,
sparks and flame. Use only in a chemical fume hood. Do not
pressurize, cut, weld, braze, solder, drill, grind, or expose empty
containers to heat, sparks or open flames.
Storage:
Keep away from sources of ignition. Store in a tightly closed
container. Store in a cool, dry, well-ventilated area away from
incompatible substances. Flammables-area.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use only under a
chemical fume hood.
Exposure Limits
CAS# 105-46-4:
United Kingdom, WEL - TWA: 200 ppm TWA; 966 mg/m3 TWA
United Kingdom, WEL - STEL: 250 ppm STEL; 1210 mg/m3 STEL
United States OSHA: 200 ppm TWA; 950 mg/m3 TWA
Belgium - TWA: 200 ppm VLE; 964 mg/m3 VLE
France - VME: 200 ppm VME; 950 mg/m3 VME
Germany: 100 ppm TWA; 480 mg/m3 TWA
Malaysia: 200 ppm TWA; 950 mg/m3 TWA
Netherlands: 200 ppm MAC; 950 mg/m3 MAC
Spain: 200 ppm VLA-ED; 966 mg/m3 VLA-ED
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Liquid
Color: colorless
Odor: Fruity odor
pH: Not available.
Vapor Pressure: 25 mm Hg @ 25C
Viscosity: Not available.
Boiling Point: 112 deg C @ 760.00mm Hg
Freezing/Melting Point: -73.5 deg C
Autoignition Temperature: 390 deg C ( 734.00 deg F)
Flash Point: 16 deg C ( 60.80 deg F)
Explosion Limits, lower: 1.70 vol %
Explosion Limits, upper: 9.80 vol %
Decomposition Temperature:
Solubility in water: 0.8g/100g H2O @ 20C
Specific Gravity/Density: 0.862-0.866 @ 20C
Molecular Formula: C6H12O2
Molecular Weight: 116.16
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, ignition sources, excess heat.
Incompatibilities with Other Materials:
Oxidizing agents, strong acids, strong bases, amines, nitrates.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide, acrid smoke and fumes.
Hazardous Polymerization: Has not been reported
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 105-46-4: AF7380000
LD50/LC50:
CAS# 105-46-4: Oral, rat: LD50 = 3200 mg/kg.
Carcinogenicity:
DL-SEC-BUTYL ACETATE -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: BUTYL ACETATES
Hazard Class: 3
UN Number: 1123
Packing Group: II
IMO
Shipping Name: BUTYL ACETATES
Hazard Class: 3.2
UN Number: 1123
Packing Group: II
RID/ADR
Shipping Name: BUTYL ACETATES
Hazard Class: 3
UN Number: 1123
Packing group: II
USA RQ: CAS# 105-46-4: 5000 lb final RQ (Listed under Butyl acetate); 2270 kg fi
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI F
Risk Phrases:
R 11 Highly flammable.
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 16 Keep away from sources of ignition - No
smoking.
S 24/25 Avoid contact with skin and eyes.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
WGK (Water Danger/Protection)
CAS# 105-46-4: No information available.
Canada
CAS# 105-46-4 is listed on Canada's DSL List.
CAS# 105-46-4 is listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 105-46-4 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 3/12/1998 Revision #3 Date: 3/18/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
(-)-N,N,N',N'-TETRAMETHYL-D-TARTARAMIDE
| 63126-52-3 |
|
Acryloyl Chloride, Stabilized with 0.1% Phenothiazine, 98%
| 92-84-2 |
|
Calcium Nitrate Tetrahydrate, P.A.
| 13477-34-4 |
|
4-Nitrophthalic acid, 99% (titr.)
| 610-27-5 |
|
Anthracene, 99%
| 120-12-7 |
|
Anthracene, p.a.
| 120-12-7 |
|
Anthracene, scintillation grade
| 120-12-7 |
|
2-Thiouracil, 99% (Titr.)
| 141-90-2 |
|
Pyrene, ca 96%
| 129-00-0 |
|
Dowex 1x2-100 ion-exchange resin
| 9085-42-1 |
|
Dowex 1x2-400 ion-exchange resin
| 9085-42-1 |
|
Ethyl Methacrylate, 99%, Inhibited with 15 ppm Hydroquinone
| 97-63-2 |
|
Gadolinium(iii) nitrate pentahydrate, 99.9%
| 52788-53-1 |
|
Bromothymol Blue, Indicator
| 76-59-5 |
|
3-Nitrobenzenesulfonic Acid, Sodium Salt, 99%
| 127-68-4 |
|
2-(2-Aminoethylamino)-Ethanol, 97%
| 111-41-1 |
|
2,2,4-Trimethylpentane, spectrophotometric grade, 99%
| 540-84-1 |
|
2,2,4-Trimethylpentane density standard
| 540-84-1 |
|
2,2,4-Trimethylpentane, 99+%
| 540-84-1 |
|
2,2,4-Trimethylpentane, reagent ACS, spectro grade
| 540-84-1 |
|
2,2,4-Trimethylpentane, reagent ACS
| 540-84-1 |
|
2,2,4-Trimethylpentane, for HPLC
| 540-84-1 |
|
3-Amino-4-Chlorobenzenesulfonyl Fluoride, 99+%
| 368-72-9 |
|
Succinic Anhydride, 99%
| 108-30-5 |
|
2,6-Di-Tert.-Butylphenol, 99%
| 128-39-2 |
|
2-Acetylthiophene, 99%
| 88-15-3 |
|
Methylamine Hydrochloride, 98%
| 593-51-1 |
|
1-Octanesulfonic Acid, Sodium Salt Monohydrate, 98%
| 207596-29-0 |
|
Phenyl Salicylate, 99% (GC)
| 118-55-8 |
|
Diethylcarbamyl chloride, 99%
| 88-10-8 |
|
1,5-Naphthalenedisulfonic Acid Disodium Salt, Dihydrate, 98% (HPLC)
| 1655-29-4 |
|
1-Hexanethiol, 96%
| 111-31-9 |
|
2-Aminopyrimidine, 99%
| 109-12-6 |
|
Polystyrene: 1% Divinylbenzene Copolymer Beads, 100-200 Mesh
| 1321-74-0 |
|
Polystyrene: 2% Divinylbenzene Copolymer Beads, 200-400 Mesh
| 1321-74-0 |
|
Dl-sec-Butyl Acetate, 99%
| 105-46-4 |
|
Cyclohexylbenzene, 98-100%
| 827-52-1 |
|
3,3'-Iminobispropylamine, 98%
| 56-18-8 |
|
DL-Leucine, 99+%
| 328-39-2 |
|
Erythrosin B, high purity biological stain
| 16423-68-0 |
|
2-Chloropropionic acid, 98%
| 598-78-7 |
|
8-Hydroxyquinoline, 99%
| 148-24-3 |
|
Triethylene glycol di-p-tosylate, 98%
| 19249-03-7 |
|
3-Phenylphenol, 90%, Balance Mainly Para-Isomer
| 580-51-8 |
|
Potassium Tetraborate Tetrahydrate, 99.5%
| 12045-78-2 |
|
8-Hydroxyquinoline, reagent ACS
| 148-24-3 |
|
Neodymium(iii)-oxide, 99.999%
| 1313-97-9 |
|
2,4-Dichloro-6-nitroaniline, 99%
| 2683-43-4 |
|
Benzenesulfonamide, 98+%
| 98-10-2 |
|
1-Naphthaldehyde, 95%
| 66-77-3 |
|
|