Search   
MSDS 
:
 1-Naphthaldehyde, 95%
CAS 
:
 66-77-3
SYNONYMS 
:
 1-Formylnaphthalene; 1-Naphthalenecarboxaldehyde.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 66-77-3 |1-Naphthaldehyde | 95.0 | 200-633-4 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Lachrymator (substance which increases the flow of tears).

Potential Health Effects
Eye:
May cause eye irritation. Lachrymator (substance which increases
the flow of tears).
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract. May be harmful if
swallowed.
Inhalation:
May cause respiratory tract irritation.
Chronic:
Not available.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.
Antidote:
None reported.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or
alcohol-resistant foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Clean up spills immediately,
observing precautions in the Protective Equipment section. Provide
ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Avoid contact with eyes, skin, and clothing. Keep
container tightly closed. Avoid ingestion and inhalation. Use with
adequate ventilation.
Storage:
Keep container closed when not in use. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 66-77-3:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: light yellow
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 160.0 - 161.0 deg C @ 15.00mm
Freezing/Melting Point: 1.00 - 2.00 deg C
Autoignition Temperature: 350 deg C ( 662.00 deg F)
Flash Point: > 112 deg C (> 233.60 deg F)
Explosion Limits, lower: N/A
Explosion Limits, upper: N/A
Decomposition Temperature:
Solubility in water: <1 g/l (20 c)
Specific Gravity/Density: 1.1500g/cm3
Molecular Formula: C11H8O
Molecular Weight: 156.18

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, strong oxidants.
Incompatibilities with Other Materials:
Strong oxidizing agents - strong bases.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide, acrid smoke and fumes.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 66-77-3: QJ0190000
LD50/LC50:
CAS# 66-77-3: Dermal, guinea pig: LD50 = >20 mL/kg; Oral, rat: LD50
= 667 mg/kg.
Carcinogenicity:
1-Naphthaldehyde -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Other
No information available.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 66-77-3: No information available.
Canada
CAS# 66-77-3 is listed on Canada's DSL List.
CAS# 66-77-3 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 66-77-3 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 2/16/1999 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
(-)-N,N,N',N'-TETRAMETHYL-D-TARTARAMIDE 63126-52-3
Acryloyl Chloride, Stabilized with 0.1% Phenothiazine, 98% 92-84-2
Calcium Nitrate Tetrahydrate, P.A. 13477-34-4
4-Nitrophthalic acid, 99% (titr.) 610-27-5
Anthracene, 99% 120-12-7
Anthracene, p.a. 120-12-7
Anthracene, scintillation grade 120-12-7
2-Thiouracil, 99% (Titr.) 141-90-2
Pyrene, ca 96% 129-00-0
Dowex 1x2-100 ion-exchange resin 9085-42-1
Dowex 1x2-400 ion-exchange resin 9085-42-1
Ethyl Methacrylate, 99%, Inhibited with 15 ppm Hydroquinone 97-63-2
Gadolinium(iii) nitrate pentahydrate, 99.9% 52788-53-1
Bromothymol Blue, Indicator 76-59-5
3-Nitrobenzenesulfonic Acid, Sodium Salt, 99% 127-68-4
2-(2-Aminoethylamino)-Ethanol, 97% 111-41-1
2,2,4-Trimethylpentane, spectrophotometric grade, 99% 540-84-1
2,2,4-Trimethylpentane density standard 540-84-1
2,2,4-Trimethylpentane, 99+% 540-84-1
2,2,4-Trimethylpentane, reagent ACS, spectro grade 540-84-1
2,2,4-Trimethylpentane, reagent ACS 540-84-1
2,2,4-Trimethylpentane, for HPLC 540-84-1
3-Amino-4-Chlorobenzenesulfonyl Fluoride, 99+% 368-72-9
Succinic Anhydride, 99% 108-30-5
2,6-Di-Tert.-Butylphenol, 99% 128-39-2
2-Acetylthiophene, 99% 88-15-3
Methylamine Hydrochloride, 98% 593-51-1
1-Octanesulfonic Acid, Sodium Salt Monohydrate, 98% 207596-29-0
Phenyl Salicylate, 99% (GC) 118-55-8
Diethylcarbamyl chloride, 99% 88-10-8
1,5-Naphthalenedisulfonic Acid Disodium Salt, Dihydrate, 98% (HPLC) 1655-29-4
1-Hexanethiol, 96% 111-31-9
2-Aminopyrimidine, 99% 109-12-6
Polystyrene: 1% Divinylbenzene Copolymer Beads, 100-200 Mesh 1321-74-0
Polystyrene: 2% Divinylbenzene Copolymer Beads, 200-400 Mesh 1321-74-0
Dl-sec-Butyl Acetate, 99% 105-46-4
Cyclohexylbenzene, 98-100% 827-52-1
3,3'-Iminobispropylamine, 98% 56-18-8
DL-Leucine, 99+% 328-39-2
Erythrosin B, high purity biological stain 16423-68-0
2-Chloropropionic acid, 98% 598-78-7
8-Hydroxyquinoline, 99% 148-24-3
Triethylene glycol di-p-tosylate, 98% 19249-03-7
3-Phenylphenol, 90%, Balance Mainly Para-Isomer 580-51-8
Potassium Tetraborate Tetrahydrate, 99.5% 12045-78-2
8-Hydroxyquinoline, reagent ACS 148-24-3
Neodymium(iii)-oxide, 99.999% 1313-97-9
2,4-Dichloro-6-nitroaniline, 99% 2683-43-4
Benzenesulfonamide, 98+% 98-10-2
1-Naphthaldehyde, 95% 66-77-3

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net