**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 111-41-1 |2-(2-Aminoethylamino)ethanol | 97 | 203-867-5 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 34
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Causes burns.Hygroscopic (absorbs moisture from the air).Corrosive.
Potential Health Effects
Eye:
Causes eye burns. May cause chemical conjunctivitis and corneal
damage.
Skin:
Causes skin burns. May be harmful if absorbed through the skin. May
cause skin rash (in milder cases), and cold and clammy skin with
cyanosis or pale color.
Ingestion:
May cause severe and permanent damage to the digestive tract. Causes
gastrointestinal tract burns. May cause perforation of the digestive
tract. May cause systemic effects.
Inhalation:
May cause severe irritation of the respiratory tract with sore
throat, coughing, shortness of breath and delayed lung edema. Causes
chemical burns to the respiratory tract. Aspiration may lead to
pulmonary edema. May cause systemic effects.
Chronic:
Effects may be delayed.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Get medical aid immediately. Do NOT allow victim to rub eyes or keep
eyes closed. Extensive irrigation with water is required (at least 30
minutes).
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes. Wash clothing before reuse. Destroy contaminated shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If breathing is difficult, give oxygen. Do NOT use
mouth-to-mouth resuscitation. If breathing has ceased apply
artificial respiration using oxygen and a suitable mechanical device
such as a bag and a mask.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Use water
spray to keep fire-exposed containers cool. Vapors may be heavier
than air. They can spread along the ground and collect in low or
confined areas. Containers may explode when heated.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or
alcohol-resistant foam. Cool containers with flooding quantities of
water until well after fire is out.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Provide ventilation.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Use only in a well-ventilated area. Do not breathe dust, vapor,
mist, or gas. Do not get in eyes, on skin, or on clothing. Keep
container tightly closed. Do not ingest or inhale. Discard
contaminated shoes.
Storage:
Keep container closed when not in use. Corrosives area. Store
protected from moisture.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 111-41-1:
Russia: 3 mg/m3 TWA
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Liquid
Color: colorless
Odor: none reported
pH: Not available.
Vapor Pressure: 0.013 mbar @ 20
Viscosity: Not available.
Boiling Point: 130 deg C @ 12.00MM HG
Freezing/Melting Point: Not available.
Autoignition Temperature: 368 deg C ( 694.40 deg F)
Flash Point: 129 deg C ( 264.20 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: slightly soluble
Specific Gravity/Density: 1.0300g/cm3
Molecular Formula: C4H12N2O
Molecular Weight: 104.15
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Ignition sources, excess heat, exposure to moist air or water.
Incompatibilities with Other Materials:
Moisture, strong oxidizing agents.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, irritating and toxic fumes and
gases, carbon dioxide, nitrogen.
Hazardous Polymerization: Has not been reported.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 111-41-1: KJ6300000
LD50/LC50:
CAS# 111-41-1: Dermal, guinea pig: LD50 = 1800 uL/kg; Draize test,
rabbit, eye: 50 mg Severe; Oral, mouse: LD50 = 3550 mg/kg; Oral,
rabbit: LD50 = 2 gm/kg; Oral, rat: LD50 = 3 gm/kg; Skin, rabbit:
LD50 = 3560 uL/kg; Skin, rat: LD50 = 2250 mg/kg.
Carcinogenicity:
2-(2-Aminoethylamino)ethanol -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: AMINES, LIQUID, CORROSIVE, N.O.S.*
Hazard Class: 8
UN Number: 2735
Packing Group: II
IMO
Shipping Name: AMINES, LIQUID, CORROSIVE, N.O.S.
Hazard Class: 8
UN Number: 2735
Packing Group: II
RID/ADR
Shipping Name: AMINES, LIQUID, CORROSIVE, N.O.S.
Hazard Class: 8
UN Number: 2735
Packing group: II
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 25 Avoid contact with eyes.
S 28A After contact with skin, wash immediately with
plenty of water.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
WGK (Water Danger/Protection)
CAS# 111-41-1: 1
Canada
CAS# 111-41-1 is listed on Canada's DSL List.
CAS# 111-41-1 is listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 111-41-1 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 9/02/1997 Revision #3 Date: 3/18/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
(-)-N,N,N',N'-TETRAMETHYL-D-TARTARAMIDE
| 63126-52-3 |
|
Acryloyl Chloride, Stabilized with 0.1% Phenothiazine, 98%
| 92-84-2 |
|
Calcium Nitrate Tetrahydrate, P.A.
| 13477-34-4 |
|
4-Nitrophthalic acid, 99% (titr.)
| 610-27-5 |
|
Anthracene, 99%
| 120-12-7 |
|
Anthracene, p.a.
| 120-12-7 |
|
Anthracene, scintillation grade
| 120-12-7 |
|
2-Thiouracil, 99% (Titr.)
| 141-90-2 |
|
Pyrene, ca 96%
| 129-00-0 |
|
Dowex 1x2-100 ion-exchange resin
| 9085-42-1 |
|
Dowex 1x2-400 ion-exchange resin
| 9085-42-1 |
|
Ethyl Methacrylate, 99%, Inhibited with 15 ppm Hydroquinone
| 97-63-2 |
|
Gadolinium(iii) nitrate pentahydrate, 99.9%
| 52788-53-1 |
|
Bromothymol Blue, Indicator
| 76-59-5 |
|
3-Nitrobenzenesulfonic Acid, Sodium Salt, 99%
| 127-68-4 |
|
2-(2-Aminoethylamino)-Ethanol, 97%
| 111-41-1 |
|
2,2,4-Trimethylpentane, spectrophotometric grade, 99%
| 540-84-1 |
|
2,2,4-Trimethylpentane density standard
| 540-84-1 |
|
2,2,4-Trimethylpentane, 99+%
| 540-84-1 |
|
2,2,4-Trimethylpentane, reagent ACS, spectro grade
| 540-84-1 |
|
2,2,4-Trimethylpentane, reagent ACS
| 540-84-1 |
|
2,2,4-Trimethylpentane, for HPLC
| 540-84-1 |
|
3-Amino-4-Chlorobenzenesulfonyl Fluoride, 99+%
| 368-72-9 |
|
Succinic Anhydride, 99%
| 108-30-5 |
|
2,6-Di-Tert.-Butylphenol, 99%
| 128-39-2 |
|
2-Acetylthiophene, 99%
| 88-15-3 |
|
Methylamine Hydrochloride, 98%
| 593-51-1 |
|
1-Octanesulfonic Acid, Sodium Salt Monohydrate, 98%
| 207596-29-0 |
|
Phenyl Salicylate, 99% (GC)
| 118-55-8 |
|
Diethylcarbamyl chloride, 99%
| 88-10-8 |
|
1,5-Naphthalenedisulfonic Acid Disodium Salt, Dihydrate, 98% (HPLC)
| 1655-29-4 |
|
1-Hexanethiol, 96%
| 111-31-9 |
|
2-Aminopyrimidine, 99%
| 109-12-6 |
|
Polystyrene: 1% Divinylbenzene Copolymer Beads, 100-200 Mesh
| 1321-74-0 |
|
Polystyrene: 2% Divinylbenzene Copolymer Beads, 200-400 Mesh
| 1321-74-0 |
|
Dl-sec-Butyl Acetate, 99%
| 105-46-4 |
|
Cyclohexylbenzene, 98-100%
| 827-52-1 |
|
3,3'-Iminobispropylamine, 98%
| 56-18-8 |
|
DL-Leucine, 99+%
| 328-39-2 |
|
Erythrosin B, high purity biological stain
| 16423-68-0 |
|
2-Chloropropionic acid, 98%
| 598-78-7 |
|
8-Hydroxyquinoline, 99%
| 148-24-3 |
|
Triethylene glycol di-p-tosylate, 98%
| 19249-03-7 |
|
3-Phenylphenol, 90%, Balance Mainly Para-Isomer
| 580-51-8 |
|
Potassium Tetraborate Tetrahydrate, 99.5%
| 12045-78-2 |
|
8-Hydroxyquinoline, reagent ACS
| 148-24-3 |
|
Neodymium(iii)-oxide, 99.999%
| 1313-97-9 |
|
2,4-Dichloro-6-nitroaniline, 99%
| 2683-43-4 |
|
Benzenesulfonamide, 98+%
| 98-10-2 |
|
1-Naphthaldehyde, 95%
| 66-77-3 |
|
|