Search   
MSDS 
:
 Neodymium(iii)-oxide, 99.999%
CAS 
:
 1313-97-9
SYNONYMS 
:
 Dineodymium Trioxide; Neodymium Sesquioxide; Neodymium Trioxide
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 1313-97-9 |Neodymium(III)-oxide | 99.999 | 215-214-1 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Hygroscopic (absorbs moisture from the air).

Potential Health Effects
Eye:
Dust may cause mechanical irritation.
Skin:
Dust may cause mechanical irritation.
Ingestion:
May cause irritation of the digestive tract.
Inhalation:
Inhalation of dust may cause respiratory tract irritation.
Chronic:
Repeated inhalation may cause chronic bronchitis.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.
Antidote:
No specific antidote exists.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Substance
is noncombustible.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up or absorb material, then place into a
suitable clean, dry, closed container for disposal. Avoid generating
dusty conditions. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Minimize dust
generation and accumulation. Avoid contact with eyes, skin, and
clothing. Avoid ingestion and inhalation.
Storage:
Store in a cool, dry, well-ventilated area away from incompatible
substances. Keep containers tightly closed.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 1313-97-9:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Powder
Color: light blue
Odor: odorless
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 2270 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: insoluble
Specific Gravity/Density: 7.2400g/cm3
Molecular Formula: Nd2O3
Molecular Weight: 336.47

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures. Absorbs carbon
dioxide from the air.
Conditions to Avoid:
Incompatible materials, dust generation, moisture, strong oxidants.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Irritating and toxic fumes and gases.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 1313-97-9: QP0185000
LD50/LC50:
CAS# 1313-97-9: Oral, rat: LD50 = >5 gm/kg.
Carcinogenicity:
Neodymium(III)-oxide -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 1313-97-9: No information available.
Canada
CAS# 1313-97-9 is listed on Canada's DSL List.
CAS# 1313-97-9 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 1313-97-9 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 10/14/1998 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
(-)-N,N,N',N'-TETRAMETHYL-D-TARTARAMIDE 63126-52-3
Acryloyl Chloride, Stabilized with 0.1% Phenothiazine, 98% 92-84-2
Calcium Nitrate Tetrahydrate, P.A. 13477-34-4
4-Nitrophthalic acid, 99% (titr.) 610-27-5
Anthracene, 99% 120-12-7
Anthracene, p.a. 120-12-7
Anthracene, scintillation grade 120-12-7
2-Thiouracil, 99% (Titr.) 141-90-2
Pyrene, ca 96% 129-00-0
Dowex 1x2-100 ion-exchange resin 9085-42-1
Dowex 1x2-400 ion-exchange resin 9085-42-1
Ethyl Methacrylate, 99%, Inhibited with 15 ppm Hydroquinone 97-63-2
Gadolinium(iii) nitrate pentahydrate, 99.9% 52788-53-1
Bromothymol Blue, Indicator 76-59-5
3-Nitrobenzenesulfonic Acid, Sodium Salt, 99% 127-68-4
2-(2-Aminoethylamino)-Ethanol, 97% 111-41-1
2,2,4-Trimethylpentane, spectrophotometric grade, 99% 540-84-1
2,2,4-Trimethylpentane density standard 540-84-1
2,2,4-Trimethylpentane, 99+% 540-84-1
2,2,4-Trimethylpentane, reagent ACS, spectro grade 540-84-1
2,2,4-Trimethylpentane, reagent ACS 540-84-1
2,2,4-Trimethylpentane, for HPLC 540-84-1
3-Amino-4-Chlorobenzenesulfonyl Fluoride, 99+% 368-72-9
Succinic Anhydride, 99% 108-30-5
2,6-Di-Tert.-Butylphenol, 99% 128-39-2
2-Acetylthiophene, 99% 88-15-3
Methylamine Hydrochloride, 98% 593-51-1
1-Octanesulfonic Acid, Sodium Salt Monohydrate, 98% 207596-29-0
Phenyl Salicylate, 99% (GC) 118-55-8
Diethylcarbamyl chloride, 99% 88-10-8
1,5-Naphthalenedisulfonic Acid Disodium Salt, Dihydrate, 98% (HPLC) 1655-29-4
1-Hexanethiol, 96% 111-31-9
2-Aminopyrimidine, 99% 109-12-6
Polystyrene: 1% Divinylbenzene Copolymer Beads, 100-200 Mesh 1321-74-0
Polystyrene: 2% Divinylbenzene Copolymer Beads, 200-400 Mesh 1321-74-0
Dl-sec-Butyl Acetate, 99% 105-46-4
Cyclohexylbenzene, 98-100% 827-52-1
3,3'-Iminobispropylamine, 98% 56-18-8
DL-Leucine, 99+% 328-39-2
Erythrosin B, high purity biological stain 16423-68-0
2-Chloropropionic acid, 98% 598-78-7
8-Hydroxyquinoline, 99% 148-24-3
Triethylene glycol di-p-tosylate, 98% 19249-03-7
3-Phenylphenol, 90%, Balance Mainly Para-Isomer 580-51-8
Potassium Tetraborate Tetrahydrate, 99.5% 12045-78-2
8-Hydroxyquinoline, reagent ACS 148-24-3
Neodymium(iii)-oxide, 99.999% 1313-97-9
2,4-Dichloro-6-nitroaniline, 99% 2683-43-4
Benzenesulfonamide, 98+% 98-10-2
1-Naphthaldehyde, 95% 66-77-3

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net