Search   
MSDS 
:
 Phenyl Salicylate, 99% (GC)
CAS 
:
 118-55-8
SYNONYMS 
:
 2-Hydroxybezoic Acid Phenyl Ester.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 118-55-8 |Phenyl salicylate | 99.0 | 204-259-2 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.

Potential Health Effects
Eye:
Causes eye irritation. May cause chemical conjunctivitis.
Skin:
Causes skin irritation. May cause skin sensitization, an allergic
reaction, which becomes evident upon re-exposure to this material.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea.
Inhalation:
Causes respiratory tract irritation. Can produce delayed pulmonary
edema.
Chronic:
Effects may be delayed. Adverse reproductive effects have been
reported in animals.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid. Do NOT use mouth-to-mouth
resuscitation.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use extinguishing media most appropriate for the surrounding fire.
Use water spray, dry chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Clean up spills immediately, observing precautions in the
Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Minimize dust
generation and accumulation. Avoid contact with eyes, skin, and
clothing. Keep container tightly closed. Avoid ingestion and
inhalation. Wash clothing before reuse.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 118-55-8:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: white
Odor: pleasant odor - aromatic odor
pH: Not available.
Vapor Pressure: < .1 mm Hg @20 C
Viscosity: Not available.
Boiling Point: 342-343F
Freezing/Melting Point: 106-115F
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: <0.1%
Specific Gravity/Density: 1.26
Molecular Formula: HOC6H4COOC6H5
Molecular Weight: 214.0682

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
High temperatures, incompatible materials, dust generation, excess
heat.
Incompatibilities with Other Materials:
Strong acids, strong bases, strong oxidizing agents.
Hazardous Decomposition Products:
Sulfur oxides (SOx), including sulfur oxide and sulfur dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 118-55-8: VO6125000
LD50/LC50:
CAS# 118-55-8: Oral, rat: LD50 = 3 gm/kg.
Carcinogenicity:
Phenyl salicylate -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
WGK (Water Danger/Protection)
CAS# 118-55-8: No information available.
Canada
CAS# 118-55-8 is listed on Canada's DSL List.
CAS# 118-55-8 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 118-55-8 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 12/02/1998 Revision #4 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
(-)-N,N,N',N'-TETRAMETHYL-D-TARTARAMIDE 63126-52-3
Acryloyl Chloride, Stabilized with 0.1% Phenothiazine, 98% 92-84-2
Calcium Nitrate Tetrahydrate, P.A. 13477-34-4
4-Nitrophthalic acid, 99% (titr.) 610-27-5
Anthracene, 99% 120-12-7
Anthracene, p.a. 120-12-7
Anthracene, scintillation grade 120-12-7
2-Thiouracil, 99% (Titr.) 141-90-2
Pyrene, ca 96% 129-00-0
Dowex 1x2-100 ion-exchange resin 9085-42-1
Dowex 1x2-400 ion-exchange resin 9085-42-1
Ethyl Methacrylate, 99%, Inhibited with 15 ppm Hydroquinone 97-63-2
Gadolinium(iii) nitrate pentahydrate, 99.9% 52788-53-1
Bromothymol Blue, Indicator 76-59-5
3-Nitrobenzenesulfonic Acid, Sodium Salt, 99% 127-68-4
2-(2-Aminoethylamino)-Ethanol, 97% 111-41-1
2,2,4-Trimethylpentane, spectrophotometric grade, 99% 540-84-1
2,2,4-Trimethylpentane density standard 540-84-1
2,2,4-Trimethylpentane, 99+% 540-84-1
2,2,4-Trimethylpentane, reagent ACS, spectro grade 540-84-1
2,2,4-Trimethylpentane, reagent ACS 540-84-1
2,2,4-Trimethylpentane, for HPLC 540-84-1
3-Amino-4-Chlorobenzenesulfonyl Fluoride, 99+% 368-72-9
Succinic Anhydride, 99% 108-30-5
2,6-Di-Tert.-Butylphenol, 99% 128-39-2
2-Acetylthiophene, 99% 88-15-3
Methylamine Hydrochloride, 98% 593-51-1
1-Octanesulfonic Acid, Sodium Salt Monohydrate, 98% 207596-29-0
Phenyl Salicylate, 99% (GC) 118-55-8
Diethylcarbamyl chloride, 99% 88-10-8
1,5-Naphthalenedisulfonic Acid Disodium Salt, Dihydrate, 98% (HPLC) 1655-29-4
1-Hexanethiol, 96% 111-31-9
2-Aminopyrimidine, 99% 109-12-6
Polystyrene: 1% Divinylbenzene Copolymer Beads, 100-200 Mesh 1321-74-0
Polystyrene: 2% Divinylbenzene Copolymer Beads, 200-400 Mesh 1321-74-0
Dl-sec-Butyl Acetate, 99% 105-46-4
Cyclohexylbenzene, 98-100% 827-52-1
3,3'-Iminobispropylamine, 98% 56-18-8
DL-Leucine, 99+% 328-39-2
Erythrosin B, high purity biological stain 16423-68-0
2-Chloropropionic acid, 98% 598-78-7
8-Hydroxyquinoline, 99% 148-24-3
Triethylene glycol di-p-tosylate, 98% 19249-03-7
3-Phenylphenol, 90%, Balance Mainly Para-Isomer 580-51-8
Potassium Tetraborate Tetrahydrate, 99.5% 12045-78-2
8-Hydroxyquinoline, reagent ACS 148-24-3
Neodymium(iii)-oxide, 99.999% 1313-97-9
2,4-Dichloro-6-nitroaniline, 99% 2683-43-4
Benzenesulfonamide, 98+% 98-10-2
1-Naphthaldehyde, 95% 66-77-3

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net