Search   
MSDS 
:
 Cyanomethyl benzenesulfonate, tech., 80%
CAS 
:
 10531-13-2
SYNONYMS 
:
 
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 10531-13-2 |Cyanomethyl benzenesulfonate | 80.0 | 234-093-6 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Causes burns.Corrosive.

Potential Health Effects
Eye:
Causes eye burns. Contact with eyes may cause severe irritation,
and possible eye burns. May cause chemical conjunctivitis and
corneal damage.
Skin:
Causes skin burns. May cause skin rash (in milder cases), and cold
and clammy skin with cyanosis or pale color.
Ingestion:
May cause severe and permanent damage to the digestive tract. Causes
gastrointestinal tract burns. May cause perforation of the digestive
tract. May cause systemic effects.
Inhalation:
May cause severe irritation of the respiratory tract with sore
throat, coughing, shortness of breath and delayed lung edema. Causes
chemical burns to the respiratory tract. Aspiration may lead to
pulmonary edema. May cause systemic effects.
Chronic:
Effects may be delayed.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately. Do NOT allow victim to rub eyes or keep eyes closed.
Extensive irrigation with water is required (at least 30 minutes).
Skin:
Get medical aid immediately. Flush skin with plenty of water for at
least 15 minutes while removing contaminated clothing and shoes.
Wash clothing before reuse. Destroy contaminated shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If breathing is difficult, give oxygen. Do NOT use
mouth-to-mouth resuscitation. If breathing has ceased apply
artificial respiration using oxygen and a suitable mechanical device
such as a bag and a mask.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use agent most appropriate to extinguish fire.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Clean up spills immediately,
observing precautions in the Protective Equipment section. Provide
ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Do not get in eyes, on skin, or on
clothing. Keep container tightly closed. Do not ingest or inhale. Use
with adequate ventilation. Discard contaminated shoes.
Storage:
Keep container closed when not in use. Store in a cool, dry,
well-ventilated area away from incompatible substances. Corrosives
area.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 10531-13-2:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: colorless
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 142.0 - 146.0 deg C @ 1.00mm
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: > 112 deg C (> 233.60 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: 1.3090g/cm3
Molecular Formula: C8H7NO3S
Molecular Weight: 197.21

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stability unknown.
Conditions to Avoid:
Incompatible materials.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, oxides of nitrogen, oxides of sulfur, carbon
dioxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 10531-13-2 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Cyanomethyl benzenesulfonate -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Other
No information available.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: CORROSIVE LIQUID, N.O.S.*
Hazard Class: 8
UN Number: 1760
Packing Group: II
IMO
Shipping Name: CORROSIVE LIQUID, N.O.S.
Hazard Class: 8
UN Number: 1760
Packing Group: II
RID/ADR
Shipping Name: CORROSIVE LIQUID, N.O.S.
Hazard Class: 8
UN Number: 1760
Packing group: II

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
WGK (Water Danger/Protection)
CAS# 10531-13-2: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 10531-13-2 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 10531-13-2 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 4/05/1997 Revision #4 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
3-Methoxycarbonylphenylboronic acid 99769-19-4
Amberlite?? ira402 cl resin 52439-77-7
Cyanomethyl benzenesulfonate, tech., 80% 10531-13-2
2-Amino-5-iodopyridine 20511-12-0
D-(-)-Isoascorbic acid, 98% 89-65-6
n-Methoxy-n-methylacetamide 78191-00-1
3-(Hydroxymethyl)benzonitrile 874-97-5
Tebbe reagent, 0.5M solution in toluene 108-88-3
1-Methyl-2-pyrrolidinone 872-50-4
Ammonia, 0.5m solution in 1,4-dioxane 123-91-1
Hydrochloric acid, 1N solution in diethyl ether 60-29-7
Hydrochloric acid, 2N solution in diethyl ether 60-29-7
Methylamine, 2M solution in THF 74-89-5
Methylamine, 2m solution in methanol 67-56-1
5-Bromovaleryl chloride 4509-90-4
Trimethylamine, 50% aqueous solution 75-50-3
4-Methoxyphenylacetyl chloride 4693-91-8
4-(Bromomethyl)biphenyl 2567-29-5
2,3,5,6-Tetrafluoro-4-hydroxybenzoic acid hydrate, 98% 0-01-1
Ethyl Alcohol, Denatured (A407) 64-17-5
Ethynylcyclopropane 6746-94-7
[Bis(2-methoxyethyl)amino]sulfur trifluoride, 50% solution in toluene 108-88-3
Amberlite?? IR 120 H Resin 78922-04-0
Oxalyl chloride, 2.0M solution in dichloromethane 75-09-2
Eaton's reagent (cas: 39394-84-8) 75-75-2
1-Methylpiperazine dihydrochloride 34352-59-5
Ethanolamine 141-43-5
4-Chlorobenzanilide 6833-15-4
1,2,3,4-Tetrahydroisoquinoline hydrochloride 14099-81-1
2-(Bromomethyl)pyridine hydrobromide 31106-82-8
2-Quinolinecarboxaldehyde 5470-96-2
p-Benzyloxybenzyl Alcohol 99% 836-43-1
Tributyl(3-methyl-2-butenyl)tin 53911-92-5
1-Docosanol 661-19-8
2-Chlorobenzoic hydrazide 5814-05-1
2-Nitrobenzoic hydrazide 606-26-8
3-(4-Hydroxyphenyl)propionic acid N-hydroxysuccinimide ester, 99+% 34071-95-9
Diethyl isocyanomethylphosphonate 41003-94-5
(R)-(+)-2-Tetrahydrofuroic acid 87392-05-0
1-PHENYL-1-CYCLOPENTANECARBONITRILE 77-57-6
(S)-(-)-2-Tetrahydrofuroic acid 87392-07-2
m-Anisic hydrazide 5785-06-8
Di-tert-butyl iminodicarboxylate 51779-32-9
(2R,3S)-1-Carboxy-4-pentyl-2,3-dihydroxycyclohexa-4,6-diene potassium 00-01-1
1,2,4,5-Tetrakis(bromomethyl)benzene, 95% 15442-91-8
Phenylacetaldehyde, 98% 122-78-1
Ethyl benzoylacetate, 90% 94-02-0
Hematein 475-25-2
1-Bromo-2-(2-methoxyethoxy)ethane, 90% 54149-17-6
2-Bromoethanol, 95% (gc) 540-51-2

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net