Search   
MSDS 
:
 D-(-)-Isoascorbic acid, 98%
CAS 
:
 89-65-6
SYNONYMS 
:
 D-Araboascorbic acid; Isovitamin C; D-erythro-Hex-2-enonic acid.     gamma-lactone; Erycorbin; Erycorbic acid; Glucosaccharonic acid;     Saccharosonic acid
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 89-65-6 |D-(-)-Isoascorbic acid | 98 | 201-928-0 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully
investigated.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract. The toxicological
properties of this substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
Laboratory experiments have resulted in mutagenic effects.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Dusts at sufficient concentrations can form
explosive mixtures with air. During a fire, irritating and highly
toxic gases may be generated by thermal decomposition or combustion.
Containers may explode in the heat of a fire.
Extinguishing Media:
Use agent most appropriate to extinguish fire. Use water spray, dry
chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Clean up spills immediately, observing precautions in the
Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Minimize dust generation and accumulation. Avoid contact with eyes,
skin, and clothing. Keep container tightly closed. Avoid ingestion
and inhalation.
Storage:
Keep container closed when not in use. Store in a tightly closed
container. Store in a cool, dry, well-ventilated area away from
incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 89-65-6:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Crystals
Color: shiny granular crystals
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 169 - 172 deg C
Autoignition Temperature: Not available.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: 174 deg C
Solubility in water: slightly soluble
Specific Gravity/Density:
Molecular Formula: C6H8O6
Molecular Weight: 176.13

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, dust generation.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong bases, chemically active metals,
aluminum, copper, magnesium, zinc.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide.
Hazardous Polymerization: Will not occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 89-65-6: KF3015000
LD50/LC50:
CAS# 89-65-6: Oral, mouse: LD50 = 8300 mg/kg; Oral, rat: LD50 = 18
gm/kg.
Carcinogenicity:
D-(-)-Isoascorbic acid -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
S 28A After contact with skin, wash immediately with
plenty of water.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 89-65-6: 0
Canada
CAS# 89-65-6 is listed on Canada's DSL List.
CAS# 89-65-6 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 89-65-6 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 3/01/1999 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
3-Methoxycarbonylphenylboronic acid 99769-19-4
Amberlite?? ira402 cl resin 52439-77-7
Cyanomethyl benzenesulfonate, tech., 80% 10531-13-2
2-Amino-5-iodopyridine 20511-12-0
D-(-)-Isoascorbic acid, 98% 89-65-6
n-Methoxy-n-methylacetamide 78191-00-1
3-(Hydroxymethyl)benzonitrile 874-97-5
Tebbe reagent, 0.5M solution in toluene 108-88-3
1-Methyl-2-pyrrolidinone 872-50-4
Ammonia, 0.5m solution in 1,4-dioxane 123-91-1
Hydrochloric acid, 1N solution in diethyl ether 60-29-7
Hydrochloric acid, 2N solution in diethyl ether 60-29-7
Methylamine, 2M solution in THF 74-89-5
Methylamine, 2m solution in methanol 67-56-1
5-Bromovaleryl chloride 4509-90-4
Trimethylamine, 50% aqueous solution 75-50-3
4-Methoxyphenylacetyl chloride 4693-91-8
4-(Bromomethyl)biphenyl 2567-29-5
2,3,5,6-Tetrafluoro-4-hydroxybenzoic acid hydrate, 98% 0-01-1
Ethyl Alcohol, Denatured (A407) 64-17-5
Ethynylcyclopropane 6746-94-7
[Bis(2-methoxyethyl)amino]sulfur trifluoride, 50% solution in toluene 108-88-3
Amberlite?? IR 120 H Resin 78922-04-0
Oxalyl chloride, 2.0M solution in dichloromethane 75-09-2
Eaton's reagent (cas: 39394-84-8) 75-75-2
1-Methylpiperazine dihydrochloride 34352-59-5
Ethanolamine 141-43-5
4-Chlorobenzanilide 6833-15-4
1,2,3,4-Tetrahydroisoquinoline hydrochloride 14099-81-1
2-(Bromomethyl)pyridine hydrobromide 31106-82-8
2-Quinolinecarboxaldehyde 5470-96-2
p-Benzyloxybenzyl Alcohol 99% 836-43-1
Tributyl(3-methyl-2-butenyl)tin 53911-92-5
1-Docosanol 661-19-8
2-Chlorobenzoic hydrazide 5814-05-1
2-Nitrobenzoic hydrazide 606-26-8
3-(4-Hydroxyphenyl)propionic acid N-hydroxysuccinimide ester, 99+% 34071-95-9
Diethyl isocyanomethylphosphonate 41003-94-5
(R)-(+)-2-Tetrahydrofuroic acid 87392-05-0
1-PHENYL-1-CYCLOPENTANECARBONITRILE 77-57-6
(S)-(-)-2-Tetrahydrofuroic acid 87392-07-2
m-Anisic hydrazide 5785-06-8
Di-tert-butyl iminodicarboxylate 51779-32-9
(2R,3S)-1-Carboxy-4-pentyl-2,3-dihydroxycyclohexa-4,6-diene potassium 00-01-1
1,2,4,5-Tetrakis(bromomethyl)benzene, 95% 15442-91-8
Phenylacetaldehyde, 98% 122-78-1
Ethyl benzoylacetate, 90% 94-02-0
Hematein 475-25-2
1-Bromo-2-(2-methoxyethoxy)ethane, 90% 54149-17-6
2-Bromoethanol, 95% (gc) 540-51-2

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net