Search   
MSDS 
:
 3-(4-Hydroxyphenyl)propionic acid N-hydroxysuccinimide ester, 99+%
CAS 
:
 34071-95-9
SYNONYMS 
:
 N-[(4-Hydroxyhydrocinnamoyl)oxy]succinimide;     Succinimido-3-(4-hydroxyphenyl)propionate.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 34071-95-9 |3-(4-Hydroxyphenyl)propionic acid N-hy| > 99 | 251-818-1 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.The toxicological
properties of this material have not been fully
investigated.Moisture sensitive.

Potential Health Effects
Eye:
Causes eye irritation.
Skin:
Causes skin irritation. May be harmful if absorbed through the skin.
The toxicological properties of this material have not been fully
investigated.
Ingestion:
May cause irritation of the digestive tract. The toxicological
properties of this substance have not been fully investigated. May be
harmful if swallowed.
Inhalation:
Causes respiratory tract irritation. The toxicological properties of
this substance have not been fully investigated. May be harmful if
inhaled.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
In case of contact, immediately flush eyes with plenty of water for
at least 15 minutes. Get medical aid.
Skin:
In case of contact, flush skin with plenty of water. Remove
contaminated clothing and shoes. Get medical aid if irritation
develops and persists. Wash clothing before reuse.
Ingestion:
If swallowed, do not induce vomiting unless directed to do so by
medical personnel. Never give anything by mouth to an unconscious
person. Get medical aid.
Inhalation:
If inhaled, remove to fresh air. If not breathing, give artificial
respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. This
material in sufficient quantity and reduced particle size is capable
of creating a dust explosion.
Extinguishing Media:
Use extinguishing media most appropriate for the surrounding fire.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Avoid generating dusty conditions. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Minimize dust generation and accumulation. Avoid
contact with eyes, skin, and clothing. Avoid breathing dust.
Storage:
Store in a cool, dry place. Keep container closed when not in use.
Keep refrigerated. (Store below 4C/39F.) Store protected from
moisture.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use process enclosure,
local exhaust ventilation, or other engineering controls to control
airborne levels.
Exposure Limits
CAS# 34071-95-9:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Powder
Color: off-white
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 133 - 135 deg C
Autoignition Temperature: Not available.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C13H13NO5
Molecular Weight: 263.25

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures. May decompose on
exposure to moist air or water.
Conditions to Avoid:
Dust generation, moisture, heat.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 34071-95-9 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
3-(4-Hydroxyphenyl)propionic acid N-hydroxysuccinimide ester -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
IMO
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
RID/ADR
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing group:

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 3 Keep in a cool place.
S 7/8 Keep container tightly closed and dry.
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 34071-95-9: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 34071-95-9 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 34071-95-9 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #3 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
3-Methoxycarbonylphenylboronic acid 99769-19-4
Amberlite?? ira402 cl resin 52439-77-7
Cyanomethyl benzenesulfonate, tech., 80% 10531-13-2
2-Amino-5-iodopyridine 20511-12-0
D-(-)-Isoascorbic acid, 98% 89-65-6
n-Methoxy-n-methylacetamide 78191-00-1
3-(Hydroxymethyl)benzonitrile 874-97-5
Tebbe reagent, 0.5M solution in toluene 108-88-3
1-Methyl-2-pyrrolidinone 872-50-4
Ammonia, 0.5m solution in 1,4-dioxane 123-91-1
Hydrochloric acid, 1N solution in diethyl ether 60-29-7
Hydrochloric acid, 2N solution in diethyl ether 60-29-7
Methylamine, 2M solution in THF 74-89-5
Methylamine, 2m solution in methanol 67-56-1
5-Bromovaleryl chloride 4509-90-4
Trimethylamine, 50% aqueous solution 75-50-3
4-Methoxyphenylacetyl chloride 4693-91-8
4-(Bromomethyl)biphenyl 2567-29-5
2,3,5,6-Tetrafluoro-4-hydroxybenzoic acid hydrate, 98% 0-01-1
Ethyl Alcohol, Denatured (A407) 64-17-5
Ethynylcyclopropane 6746-94-7
[Bis(2-methoxyethyl)amino]sulfur trifluoride, 50% solution in toluene 108-88-3
Amberlite?? IR 120 H Resin 78922-04-0
Oxalyl chloride, 2.0M solution in dichloromethane 75-09-2
Eaton's reagent (cas: 39394-84-8) 75-75-2
1-Methylpiperazine dihydrochloride 34352-59-5
Ethanolamine 141-43-5
4-Chlorobenzanilide 6833-15-4
1,2,3,4-Tetrahydroisoquinoline hydrochloride 14099-81-1
2-(Bromomethyl)pyridine hydrobromide 31106-82-8
2-Quinolinecarboxaldehyde 5470-96-2
p-Benzyloxybenzyl Alcohol 99% 836-43-1
Tributyl(3-methyl-2-butenyl)tin 53911-92-5
1-Docosanol 661-19-8
2-Chlorobenzoic hydrazide 5814-05-1
2-Nitrobenzoic hydrazide 606-26-8
3-(4-Hydroxyphenyl)propionic acid N-hydroxysuccinimide ester, 99+% 34071-95-9
Diethyl isocyanomethylphosphonate 41003-94-5
(R)-(+)-2-Tetrahydrofuroic acid 87392-05-0
1-PHENYL-1-CYCLOPENTANECARBONITRILE 77-57-6
(S)-(-)-2-Tetrahydrofuroic acid 87392-07-2
m-Anisic hydrazide 5785-06-8
Di-tert-butyl iminodicarboxylate 51779-32-9
(2R,3S)-1-Carboxy-4-pentyl-2,3-dihydroxycyclohexa-4,6-diene potassium 00-01-1
1,2,4,5-Tetrakis(bromomethyl)benzene, 95% 15442-91-8
Phenylacetaldehyde, 98% 122-78-1
Ethyl benzoylacetate, 90% 94-02-0
Hematein 475-25-2
1-Bromo-2-(2-methoxyethoxy)ethane, 90% 54149-17-6
2-Bromoethanol, 95% (gc) 540-51-2

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net