Search   
MSDS 
:
 5-Bromovaleryl chloride
CAS 
:
 4509-90-4
SYNONYMS 
:
 5-Bromopentanoyl chloride.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 4509-90-4 |5-Bromovaleryl chloride | 98 | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 29 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Contact with water liberates toxic gas. Causes burns.

Potential Health Effects
Eye:
Causes eye burns. Lachrymator (substance which increases the flow
of tears).
Skin:
Causes skin burns.
Ingestion:
Causes gastrointestinal tract burns.
Inhalation:
Causes chemical burns to the respiratory tract.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
In case of contact, immediately flush eyes with plenty of water for
at least 15 minutes. Get medical aid immediately.
Skin:
In case of contact, immediately flush skin with plenty of water for
at least 15 minutes while removing contaminated clothing and shoes.
Get medical aid immediately. Wash clothing before reuse.
Ingestion:
If swallowed, do NOT induce vomiting. Get medical aid immediately.
If victim is fully conscious, give a cupful of water. Never give
anything by mouth to an unconscious person.
Inhalation:
If inhaled, remove to fresh air. If not breathing, give artificial
respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Use of water will produce irritating and toxic
vapors of hydrogen chloride. Hydrochloric acid solutions react with
most metals, forming flammable hydrogen gas.
Extinguishing Media:
Use foam, dry chemical, or carbon dioxide. DO NOT USE WATER!

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Provide ventilation. Do not expose
spill to water.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Do not allow water
to get into the container because of violent reaction. Do not get in
eyes, on skin, or on clothing. Do not breathe vapor or mist.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances. Corrosives
area. Store protected from moisture.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 4509-90-4:


Personal Protective Equipment

Eyes:
Wear chemical splash goggles and face shield.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear, colorless
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 116 - 118 deg C @ 33 mmHg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: 107 deg C ( 224.60 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: Reacts.
Specific Gravity/Density: 1.490
Molecular Formula: C5H8BrClO
Molecular Weight: 199.47

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions. Material hydrolyzes in contact with
moisture/water releasing toxic and corrosive fumes of hydrogen
chloride and aqueous hydrochloric acid.
Conditions to Avoid:
Exposure to moist air or water.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong bases.
Hazardous Decomposition Products:
Hydrogen chloride, carbon monoxide, carbon dioxide, hydrogen bromide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 4509-90-4 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
5-Bromovaleryl chloride -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S.*
Hazard Class: 8
UN Number: 3265
Packing Group: II
IMO
Shipping Name: CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S.
Hazard Class: 8
UN Number: 3265
Packing Group: II
RID/ADR
Shipping Name: CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S.
Hazard Class: 8
UN Number: 3265
Packing group: II

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 29 Contact with water liberates toxic gas.
R 34 Causes burns.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
WGK (Water Danger/Protection)
CAS# 4509-90-4: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 4509-90-4 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 4509-90-4 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 6/10/2003 Revision #0 Date: Original.

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
3-Methoxycarbonylphenylboronic acid 99769-19-4
Amberlite?? ira402 cl resin 52439-77-7
Cyanomethyl benzenesulfonate, tech., 80% 10531-13-2
2-Amino-5-iodopyridine 20511-12-0
D-(-)-Isoascorbic acid, 98% 89-65-6
n-Methoxy-n-methylacetamide 78191-00-1
3-(Hydroxymethyl)benzonitrile 874-97-5
Tebbe reagent, 0.5M solution in toluene 108-88-3
1-Methyl-2-pyrrolidinone 872-50-4
Ammonia, 0.5m solution in 1,4-dioxane 123-91-1
Hydrochloric acid, 1N solution in diethyl ether 60-29-7
Hydrochloric acid, 2N solution in diethyl ether 60-29-7
Methylamine, 2M solution in THF 74-89-5
Methylamine, 2m solution in methanol 67-56-1
5-Bromovaleryl chloride 4509-90-4
Trimethylamine, 50% aqueous solution 75-50-3
4-Methoxyphenylacetyl chloride 4693-91-8
4-(Bromomethyl)biphenyl 2567-29-5
2,3,5,6-Tetrafluoro-4-hydroxybenzoic acid hydrate, 98% 0-01-1
Ethyl Alcohol, Denatured (A407) 64-17-5
Ethynylcyclopropane 6746-94-7
[Bis(2-methoxyethyl)amino]sulfur trifluoride, 50% solution in toluene 108-88-3
Amberlite?? IR 120 H Resin 78922-04-0
Oxalyl chloride, 2.0M solution in dichloromethane 75-09-2
Eaton's reagent (cas: 39394-84-8) 75-75-2
1-Methylpiperazine dihydrochloride 34352-59-5
Ethanolamine 141-43-5
4-Chlorobenzanilide 6833-15-4
1,2,3,4-Tetrahydroisoquinoline hydrochloride 14099-81-1
2-(Bromomethyl)pyridine hydrobromide 31106-82-8
2-Quinolinecarboxaldehyde 5470-96-2
p-Benzyloxybenzyl Alcohol 99% 836-43-1
Tributyl(3-methyl-2-butenyl)tin 53911-92-5
1-Docosanol 661-19-8
2-Chlorobenzoic hydrazide 5814-05-1
2-Nitrobenzoic hydrazide 606-26-8
3-(4-Hydroxyphenyl)propionic acid N-hydroxysuccinimide ester, 99+% 34071-95-9
Diethyl isocyanomethylphosphonate 41003-94-5
(R)-(+)-2-Tetrahydrofuroic acid 87392-05-0
1-PHENYL-1-CYCLOPENTANECARBONITRILE 77-57-6
(S)-(-)-2-Tetrahydrofuroic acid 87392-07-2
m-Anisic hydrazide 5785-06-8
Di-tert-butyl iminodicarboxylate 51779-32-9
(2R,3S)-1-Carboxy-4-pentyl-2,3-dihydroxycyclohexa-4,6-diene potassium 00-01-1
1,2,4,5-Tetrakis(bromomethyl)benzene, 95% 15442-91-8
Phenylacetaldehyde, 98% 122-78-1
Ethyl benzoylacetate, 90% 94-02-0
Hematein 475-25-2
1-Bromo-2-(2-methoxyethoxy)ethane, 90% 54149-17-6
2-Bromoethanol, 95% (gc) 540-51-2

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net