Search   
MSDS 
:
 2-Bromoethanol, 95% (gc)
CAS 
:
 540-51-2
SYNONYMS 
:
 Ethylene bromohydrin
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 540-51-2 |2-Bromoethanol | 97.0 | 208-748-1 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes and skin.Hygroscopic (absorbs moisture from the
air).The toxicological properties of this material have not been
fully investigated.

Potential Health Effects
Eye:
Causes eye irritation.
Skin:
Causes skin irritation.
Ingestion:
May cause irritation of the digestive tract. The toxicological
properties of this substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or chemical foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation. Avoid
contact with eyes, skin, and clothing. Keep container tightly closed.
Avoid ingestion and inhalation.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 540-51-2:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Wear a NIOSH/MSHA or European Standard EN 149
approved full-facepiece airline respirator in the
positive pressure mode with emergency escape
provisions.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: yellow
Odor: sweet, fruity odor - weak odor
pH: Not available.
Vapor Pressure: 2.4 mm Hg @20c
Viscosity: Not available.
Boiling Point: 149-150C
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: > 230 deg F (> 110.00 deg C)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: Soluble.
Specific Gravity/Density: 1.7600g/cm3
Molecular Formula: C2H5BrO
Molecular Weight: 124.97

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials.
Incompatibilities with Other Materials:
Strong acids - strong oxidizing agents - acid chlorides - strong
reducing agents - acid anhydrides.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide, hydrogen bromide, bromine.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 540-51-2: KJ8225000
LD50/LC50:
Not available.
Not available.
Carcinogenicity:
2-Bromoethanol -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/38 Irritating to eyes and skin.
Safety Phrases:
S 7/9 Keep container tightly closed and in a
well-ventilated place.
S 16 Keep away from sources of ignition - No
smoking.
S 28A After contact with skin, wash immediately with
plenty of water.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 540-51-2: 3
Canada
CAS# 540-51-2 is listed on Canada's NDSL List.
CAS# 540-51-2 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 540-51-2 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/23/1998 Revision #3 Date: 3/04/2004

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
3-Methoxycarbonylphenylboronic acid 99769-19-4
Amberlite?? ira402 cl resin 52439-77-7
Cyanomethyl benzenesulfonate, tech., 80% 10531-13-2
2-Amino-5-iodopyridine 20511-12-0
D-(-)-Isoascorbic acid, 98% 89-65-6
n-Methoxy-n-methylacetamide 78191-00-1
3-(Hydroxymethyl)benzonitrile 874-97-5
Tebbe reagent, 0.5M solution in toluene 108-88-3
1-Methyl-2-pyrrolidinone 872-50-4
Ammonia, 0.5m solution in 1,4-dioxane 123-91-1
Hydrochloric acid, 1N solution in diethyl ether 60-29-7
Hydrochloric acid, 2N solution in diethyl ether 60-29-7
Methylamine, 2M solution in THF 74-89-5
Methylamine, 2m solution in methanol 67-56-1
5-Bromovaleryl chloride 4509-90-4
Trimethylamine, 50% aqueous solution 75-50-3
4-Methoxyphenylacetyl chloride 4693-91-8
4-(Bromomethyl)biphenyl 2567-29-5
2,3,5,6-Tetrafluoro-4-hydroxybenzoic acid hydrate, 98% 0-01-1
Ethyl Alcohol, Denatured (A407) 64-17-5
Ethynylcyclopropane 6746-94-7
[Bis(2-methoxyethyl)amino]sulfur trifluoride, 50% solution in toluene 108-88-3
Amberlite?? IR 120 H Resin 78922-04-0
Oxalyl chloride, 2.0M solution in dichloromethane 75-09-2
Eaton's reagent (cas: 39394-84-8) 75-75-2
1-Methylpiperazine dihydrochloride 34352-59-5
Ethanolamine 141-43-5
4-Chlorobenzanilide 6833-15-4
1,2,3,4-Tetrahydroisoquinoline hydrochloride 14099-81-1
2-(Bromomethyl)pyridine hydrobromide 31106-82-8
2-Quinolinecarboxaldehyde 5470-96-2
p-Benzyloxybenzyl Alcohol 99% 836-43-1
Tributyl(3-methyl-2-butenyl)tin 53911-92-5
1-Docosanol 661-19-8
2-Chlorobenzoic hydrazide 5814-05-1
2-Nitrobenzoic hydrazide 606-26-8
3-(4-Hydroxyphenyl)propionic acid N-hydroxysuccinimide ester, 99+% 34071-95-9
Diethyl isocyanomethylphosphonate 41003-94-5
(R)-(+)-2-Tetrahydrofuroic acid 87392-05-0
1-PHENYL-1-CYCLOPENTANECARBONITRILE 77-57-6
(S)-(-)-2-Tetrahydrofuroic acid 87392-07-2
m-Anisic hydrazide 5785-06-8
Di-tert-butyl iminodicarboxylate 51779-32-9
(2R,3S)-1-Carboxy-4-pentyl-2,3-dihydroxycyclohexa-4,6-diene potassium 00-01-1
1,2,4,5-Tetrakis(bromomethyl)benzene, 95% 15442-91-8
Phenylacetaldehyde, 98% 122-78-1
Ethyl benzoylacetate, 90% 94-02-0
Hematein 475-25-2
1-Bromo-2-(2-methoxyethoxy)ethane, 90% 54149-17-6
2-Bromoethanol, 95% (gc) 540-51-2

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net