Search   
MSDS 
:
 1-Iodopropane, 99%, Stabilized over Copper
CAS 
:
 107-08-4
SYNONYMS 
:
 Propyl iodide.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 107-08-4 |1-Iodopropane, Stabilized over Copper | 99 | 203-460-2 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: 10

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Flammable.Cancer suspect agent.Light sensitive.The toxicological
properties of this material have not been fully investigated.

Potential Health Effects
Eye:
May cause eye irritation. May cause chemical conjunctivitis and
corneal damage.
Skin:
May cause skin irritation. May cause cyanosis of the extremities.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. The toxicological properties of this substance have not
been fully investigated. Ingestion of large amounts may cause CNS
depression.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated. Aspiration may
lead to pulmonary edema. Vapors may cause dizziness or suffocation.
May cause burning sensation in the chest.
Chronic:
Effects may be delayed.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid. Do NOT use mouth-to-mouth
resuscitation.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Vapors may form an explosive mixture with air.
Vapors can travel to a source of ignition and flash back. During a
fire, irritating and highly toxic gases may be generated by thermal
decomposition or combustion. Will burn if involved in a fire. Use
water spray to keep fire-exposed containers cool. Containers may
explode in the heat of a fire. Flammable liquid and vapor. Vapors
may be heavier than air. They can spread along the ground and
collect in low or confined areas. Runoff from fire control or
dilution water may cause pollution.
Extinguishing Media:
For small fires, use dry chemical, carbon dioxide, water spray or
alcohol-resistant foam. For large fires, use water spray, fog, or
alcohol-resistant foam. Use water spray to cool fire-exposed
containers. Water may be ineffective. Use agent most appropriate to
extinguish fire. Do NOT use straight streams of water.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Use a spark-proof tool. Provide ventilation. A
vapor suppressing foam may be used to reduce vapors.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Ground and bond containers when transferring material. Use
spark-proof tools and explosion proof equipment. Avoid contact with
eyes, skin, and clothing. Empty containers retain product residue,
(liquid and/or vapor), and can be dangerous. Keep container tightly
closed. Keep away from heat, sparks and flame. Avoid ingestion and
inhalation. Store protected from light. Do not pressurize, cut,
weld, braze, solder, drill, grind, or expose empty containers to
heat, sparks or open flames.
Storage:
Keep away from sources of ignition. Store in a tightly closed
container. Store in a cool, dry, well-ventilated area away from
incompatible substances. Flammables-area. Store protected from
light.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate general or
local explosion-proof ventilation to keep airborne levels to
acceptable levels.
Exposure Limits
CAS# 107-08-4:


Personal Protective Equipment

Eyes:
Wear chemical splash goggles. Wear appropriate
protective eyeglasses or chemical safety goggles as
described by OSHA's eye and face protection
regulations in 29 CFR 1910.133 or European Standard
EN166.
Skin:
Wear appropriate protective gloves and clothing to
prevent skin exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: colorless
Odor: None reported.
pH: Not available.
Vapor Pressure: 43 mmHg @ 25 C
Viscosity: Not available.
Boiling Point: 101 - 102 deg C @ 760.00mmHg
Freezing/Melting Point: -101 deg C
Autoignition Temperature: Not available.
Flash Point: 34 deg C ( 93.20 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: miscible with alcohol and ether
Specific Gravity/Density: 1.7430g/cm3
Molecular Formula: C3H7I
Molecular Weight: 169.99

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, light, ignition sources, excess heat, strong
oxidants.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide, hydrogen iodide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 107-08-4: TZ4100000
LD50/LC50:
CAS# 107-08-4: Inhalation, rat: LC50 = 73 gm/m3/30M; Oral, mouse:
LD50 = >1800 mg/kg.
Carcinogenicity:
1-Iodopropane, Stabilized over Copper -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: IODOPROPANES
Hazard Class: 3
UN Number: 2392
Packing Group: III
IMO
Shipping Name: IODOPROPANES
Hazard Class: 3.3
UN Number: 2392
Packing Group: III
RID/ADR
Shipping Name: IODOPROPANES
Hazard Class: 3
UN Number: 2392
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
R 10 Flammable.
Safety Phrases:
S 9 Keep container in a well-ventilated place.
S 16 Keep away from sources of ignition - No
smoking.
S 33 Take precautionary measures against static
discharges.
WGK (Water Danger/Protection)
CAS# 107-08-4: No information available.
Canada
CAS# 107-08-4 is listed on Canada's DSL List.
CAS# 107-08-4 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 107-08-4 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 3/18/1998 Revision #5 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
2,6-Pyridinedicarboxylic Acid Chloride, 97% 3739-94-4
OPD tablets, 120 mg/tablet 615-28-1
Tetrabutylphosphonium bromide, 98% 3115-68-2
2'-Deoxyguanosine 5'-Monophosphate, Sodium Salt Hydrate 52558-16-4
4-(Dimethylamino)pyridinium Bromide Perbromide 92976-81-3
Mercury(ii) thiocyanate, p.a. 592-85-8
Beta-Ionone, Synthetic, 96% 14901-07-6
Quercetin (Pract) 117-39-5
4-Chlorobenzotrichloride, 99% 5216-25-1
1-Iodopropane, 99%, Stabilized over Copper 107-08-4
2-Acetyl-1-methylpyrrole, 99% 932-16-1
4-Dimethylamino-4'-nitrostilbene 4584-57-0
Pentafluorothiophenol, 97% 771-62-0
1-(4-METHOXYPHENYL)-1-CYCLOPROPANE- CARBONITRILE 16728-00-0
Triphenylthioantimonate, 99% 28609-58-7
4-Methylthiazole, 99% 693-95-8
DL-2-Amino-1-Propanol, 98% 6168-72-5
2,5-Diphenyl-p-benzoquinone (pract), 93% (uv-vis) 844-51-9
4-Methylbenzyltriphenylphosphonium chloride, 99% 1530-37-6
L-(+)-Prolinol 23356-96-9
Prostaglandin VIII, 99% 0-01-1
Allyl alcohol 107-18-6
Phosphorus Tribromide, 99% 7789-60-8
5-Nitroisoquinoline, 98% 607-32-9
1,3-Acetonedicarboxylic acid, 96% 542-05-2
Pentacene, 98% 135-48-8
3,3'-Dimethoxybenzidine dihydrochloride, 99% (titr.) 20325-40-0
Diethyl Bis(hydroxymethyl)malonate, 95% (HPLC) 20605-01-0
P-Bromo-DL-Phenylalanine, 99% 14091-15-7
1,2-(Didodecyloxy)benzene, 98% (GC) 42244-53-1
p-Anisaldehyde, 99+% 123-11-5
Diazogen, 99% 80-11-5
2-Fluoro-4-Nitrotoluene, 98% 1427-07-2
Sodium triacetoxyborohydride 56553-60-7
Indole-2-carboxylic acid, 99% 1477-50-5
Pyridoxine Hydrochloride, 99% (Titr.) 58-56-0
2,6-Dichlorophenol 87-65-0
1,2-Butanediol, 98% 26171-83-5
2-(2-Aminoethoxy)ethanol, 98% 929-06-6
Poly(propylene Glycol), Average M.W. 425 25322-69-4
Valinomycin, 96% (HPLC) 2001-95-8
7-Amino-4-Methyl-1,8-Naphthyridin-2-ol, 98 % 1569-15-9
Benzyl butyrate, 98% 103-37-7
Lutetium oxide, 99.99%, -325 mesh 12032-20-1
P-Nitrophenyl Chloroformate, 96% (Titr.) 7693-46-1
Potassium sorbate, 99% 590-00-1
Phthalan, 97% 496-14-0
Cinnamyl Acetate, 99+% 103-54-8
Butyl Isocyanatoacetate, 98% (GC) 17046-22-9
Zirconyl(IV) chloride octahydrate, 98+% 7699-43-6

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net