Search   
MSDS 
:
 Triphenylthioantimonate, 99%
CAS 
:
 28609-58-7
SYNONYMS 
:
 (Triphenylthio)antimony
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 28609-58-7 |Triphenylthioantimonate | 99% | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XN
Risk Phrases: 20/22

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Harmful by inhalation and if swallowed.Harmful.The toxicological
properties of this material have not been fully
investigated.Stench.Moisture sensitive.Light sensitive.Air sensitive.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
Harmful if swallowed.
Inhalation:
Harmful if inhaled. May cause respiratory tract irritation.
Chronic:
Not available.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes.
Ingestion:
Get medical aid. Wash mouth out with water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or chemical foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Avoid breathing dust, vapor, mist, or gas. Avoid contact with skin
and eyes. Use only in a chemical fume hood.
Storage:
Do not store in direct sunlight. Store in a tightly closed
container. Store in a dry area. Keep under a nitrogen blanket. Keep
refrigerated. (Store below 4C/39F.)

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower.
Exposure Limits
CAS# 28609-58-7:
United Kingdom, WEL - TWA: (listed as antimony): 0.5 mg/m3 TWA
United Kingdom, WEL - STEL: (listed as antimony): 1.5 mg/m3 STEL
United States OSHA: 0.5 mg/m3 TWA (listed under Antimony).
Belgium - TWA: (listed as antimony): 0.5 mg/m3 VLE
France - VME: (listed as antimony): 0.5 mg/m3 VME
Germany: (listed as antimony): 0.5 mg/m3 VME
Japan: (listed as antimony): 0.1 mg/m3 OEL
Malaysia: (listed as antimony): 0.5 mg/m3 TWA
Netherlands: (listed as antimony): 0.5 mg/m3 MAC
Russia: (listed as antimony): 0.5 mg/m3 TWA
Russia: (listed as antimony): 0.2 mg/m3 STEL
Spain: (listed as antimony): 0.5 mg/m3 VLA-ED

Personal Protective Equipment

Eyes:
Wear chemical splash goggles.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear a chemical apron.
Respirators:
A NIOSH/MSHA approved air purifying dust or mist
respirator or European Standard EN 149.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: yellow
Odor: Stench.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 65 - 68 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C18H15S3Sb
Molecular Weight: 449.35

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Not available.
Conditions to Avoid:
Incompatible materials, light, exposure to air, exposure to moist air
or water.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, oxides of sulfur, carbon dioxide, antimony/antimony
oxides.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 28609-58-7 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Triphenylthioantimonate -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: TOXIC SOLID, ORGANIC, N.O.S.*
Hazard Class: 6.1
UN Number: 2811
Packing Group: III
IMO
Shipping Name: TOXIC SOLID, ORGANIC, N.O.S.
Hazard Class: 6.1
UN Number: 2811
Packing Group: III
RID/ADR
Shipping Name: TOXIC SOLID, ORGANIC, N.O.S.
Hazard Class: 6.1
UN Number: 2811
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
Risk Phrases:
R 20/22 Harmful by inhalation and if swallowed.
Safety Phrases:
S 22 Do not breathe dust.
WGK (Water Danger/Protection)
CAS# 28609-58-7: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 28609-58-7 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 28609-58-7 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
2,6-Pyridinedicarboxylic Acid Chloride, 97% 3739-94-4
OPD tablets, 120 mg/tablet 615-28-1
Tetrabutylphosphonium bromide, 98% 3115-68-2
2'-Deoxyguanosine 5'-Monophosphate, Sodium Salt Hydrate 52558-16-4
4-(Dimethylamino)pyridinium Bromide Perbromide 92976-81-3
Mercury(ii) thiocyanate, p.a. 592-85-8
Beta-Ionone, Synthetic, 96% 14901-07-6
Quercetin (Pract) 117-39-5
4-Chlorobenzotrichloride, 99% 5216-25-1
1-Iodopropane, 99%, Stabilized over Copper 107-08-4
2-Acetyl-1-methylpyrrole, 99% 932-16-1
4-Dimethylamino-4'-nitrostilbene 4584-57-0
Pentafluorothiophenol, 97% 771-62-0
1-(4-METHOXYPHENYL)-1-CYCLOPROPANE- CARBONITRILE 16728-00-0
Triphenylthioantimonate, 99% 28609-58-7
4-Methylthiazole, 99% 693-95-8
DL-2-Amino-1-Propanol, 98% 6168-72-5
2,5-Diphenyl-p-benzoquinone (pract), 93% (uv-vis) 844-51-9
4-Methylbenzyltriphenylphosphonium chloride, 99% 1530-37-6
L-(+)-Prolinol 23356-96-9
Prostaglandin VIII, 99% 0-01-1
Allyl alcohol 107-18-6
Phosphorus Tribromide, 99% 7789-60-8
5-Nitroisoquinoline, 98% 607-32-9
1,3-Acetonedicarboxylic acid, 96% 542-05-2
Pentacene, 98% 135-48-8
3,3'-Dimethoxybenzidine dihydrochloride, 99% (titr.) 20325-40-0
Diethyl Bis(hydroxymethyl)malonate, 95% (HPLC) 20605-01-0
P-Bromo-DL-Phenylalanine, 99% 14091-15-7
1,2-(Didodecyloxy)benzene, 98% (GC) 42244-53-1
p-Anisaldehyde, 99+% 123-11-5
Diazogen, 99% 80-11-5
2-Fluoro-4-Nitrotoluene, 98% 1427-07-2
Sodium triacetoxyborohydride 56553-60-7
Indole-2-carboxylic acid, 99% 1477-50-5
Pyridoxine Hydrochloride, 99% (Titr.) 58-56-0
2,6-Dichlorophenol 87-65-0
1,2-Butanediol, 98% 26171-83-5
2-(2-Aminoethoxy)ethanol, 98% 929-06-6
Poly(propylene Glycol), Average M.W. 425 25322-69-4
Valinomycin, 96% (HPLC) 2001-95-8
7-Amino-4-Methyl-1,8-Naphthyridin-2-ol, 98 % 1569-15-9
Benzyl butyrate, 98% 103-37-7
Lutetium oxide, 99.99%, -325 mesh 12032-20-1
P-Nitrophenyl Chloroformate, 96% (Titr.) 7693-46-1
Potassium sorbate, 99% 590-00-1
Phthalan, 97% 496-14-0
Cinnamyl Acetate, 99+% 103-54-8
Butyl Isocyanatoacetate, 98% (GC) 17046-22-9
Zirconyl(IV) chloride octahydrate, 98+% 7699-43-6

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net