Search   
MSDS 
:
 4-Methylthiazole, 99%
CAS 
:
 693-95-8
SYNONYMS 
:
 Thiazole, 4-methyl-
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 693-95-8 |Thiazole, 4-methyl- | 99 | 211-764-1 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: F
Risk Phrases: 10

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Flammable.

Potential Health Effects
Eye:
Vapors may cause eye irritation.
Skin:
Causes skin irritation.
Ingestion:
May cause digestive tract disturbances.
Inhalation:
Causes irritation of mucous membrane. Vapors may cause dizziness or
suffocation.
Chronic:
Not available.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Remove
contaminated clothing and shoes.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Vapors may form an explosive mixture with air. Will
burn if involved in a fire. Use water spray to keep fire-exposed
containers cool. Containers may explode in the heat of a fire.
Flammable liquid and vapor. May be ignited by heat, sparks, and
flame.
Extinguishing Media:
For small fires, use dry chemical, carbon dioxide, water spray or
alcohol-resistant foam. For large fires, use water spray, fog, or
alcohol-resistant foam. Use water spray to cool fire-exposed
containers. Water may be ineffective. Do NOT use straight streams of
water.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Use a spark-proof tool. Provide ventilation. A
vapor suppressing foam may be used to reduce vapors. Water spray may
reduce vapor but may not prevent ignition in closed spaces.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Use with adequate ventilation. Ground and bond containers when
transferring material. Use spark-proof tools and explosion proof
equipment. Avoid contact with eyes, skin, and clothing. Empty
containers retain product residue, (liquid and/or vapor), and can be
dangerous. Keep away from heat, sparks and flame. Avoid ingestion and
inhalation. Do not pressurize, cut, weld, braze, solder, drill,
grind, or expose empty containers to heat, sparks or open flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.
Flammables-area.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 693-95-8:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear slightly yellow
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 133.0 - 134.0 deg C
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: 32 deg C ( 89.60 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: 1.0900g/cm3
Molecular Formula: C4H5NS
Molecular Weight: 99.15

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, ignition sources, excess heat, strong
oxidants.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 693-95-8: XJ5096000
LD50/LC50:
CAS# 693-95-8: Oral, mouse: LD50 = 360 uL/kg.
Carcinogenicity:
Thiazole, 4-methyl- -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: FLAMMABLE LIQUID, N.O.S.*
Hazard Class: 3
UN Number: 1993
Packing Group: II
IMO
Shipping Name: FLAMMABLE LIQUID, N.O.S.
Hazard Class: 3.2
UN Number: 1993
Packing Group: II
RID/ADR
Shipping Name: FLAMMABLE LIQUID, N.O.S.
Hazard Class: 3
UN Number: 1993
Packing group: II

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: F
Risk Phrases:
R 10 Flammable.
Safety Phrases:
S 9 Keep container in a well-ventilated place.
S 16 Keep away from sources of ignition - No
smoking.
S 33 Take precautionary measures against static
discharges.
S 50A Do not mix with acids.
WGK (Water Danger/Protection)
CAS# 693-95-8: No information available.
Canada
CAS# 693-95-8 is listed on Canada's DSL List.
CAS# 693-95-8 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 693-95-8 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1998 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
2,6-Pyridinedicarboxylic Acid Chloride, 97% 3739-94-4
OPD tablets, 120 mg/tablet 615-28-1
Tetrabutylphosphonium bromide, 98% 3115-68-2
2'-Deoxyguanosine 5'-Monophosphate, Sodium Salt Hydrate 52558-16-4
4-(Dimethylamino)pyridinium Bromide Perbromide 92976-81-3
Mercury(ii) thiocyanate, p.a. 592-85-8
Beta-Ionone, Synthetic, 96% 14901-07-6
Quercetin (Pract) 117-39-5
4-Chlorobenzotrichloride, 99% 5216-25-1
1-Iodopropane, 99%, Stabilized over Copper 107-08-4
2-Acetyl-1-methylpyrrole, 99% 932-16-1
4-Dimethylamino-4'-nitrostilbene 4584-57-0
Pentafluorothiophenol, 97% 771-62-0
1-(4-METHOXYPHENYL)-1-CYCLOPROPANE- CARBONITRILE 16728-00-0
Triphenylthioantimonate, 99% 28609-58-7
4-Methylthiazole, 99% 693-95-8
DL-2-Amino-1-Propanol, 98% 6168-72-5
2,5-Diphenyl-p-benzoquinone (pract), 93% (uv-vis) 844-51-9
4-Methylbenzyltriphenylphosphonium chloride, 99% 1530-37-6
L-(+)-Prolinol 23356-96-9
Prostaglandin VIII, 99% 0-01-1
Allyl alcohol 107-18-6
Phosphorus Tribromide, 99% 7789-60-8
5-Nitroisoquinoline, 98% 607-32-9
1,3-Acetonedicarboxylic acid, 96% 542-05-2
Pentacene, 98% 135-48-8
3,3'-Dimethoxybenzidine dihydrochloride, 99% (titr.) 20325-40-0
Diethyl Bis(hydroxymethyl)malonate, 95% (HPLC) 20605-01-0
P-Bromo-DL-Phenylalanine, 99% 14091-15-7
1,2-(Didodecyloxy)benzene, 98% (GC) 42244-53-1
p-Anisaldehyde, 99+% 123-11-5
Diazogen, 99% 80-11-5
2-Fluoro-4-Nitrotoluene, 98% 1427-07-2
Sodium triacetoxyborohydride 56553-60-7
Indole-2-carboxylic acid, 99% 1477-50-5
Pyridoxine Hydrochloride, 99% (Titr.) 58-56-0
2,6-Dichlorophenol 87-65-0
1,2-Butanediol, 98% 26171-83-5
2-(2-Aminoethoxy)ethanol, 98% 929-06-6
Poly(propylene Glycol), Average M.W. 425 25322-69-4
Valinomycin, 96% (HPLC) 2001-95-8
7-Amino-4-Methyl-1,8-Naphthyridin-2-ol, 98 % 1569-15-9
Benzyl butyrate, 98% 103-37-7
Lutetium oxide, 99.99%, -325 mesh 12032-20-1
P-Nitrophenyl Chloroformate, 96% (Titr.) 7693-46-1
Potassium sorbate, 99% 590-00-1
Phthalan, 97% 496-14-0
Cinnamyl Acetate, 99+% 103-54-8
Butyl Isocyanatoacetate, 98% (GC) 17046-22-9
Zirconyl(IV) chloride octahydrate, 98+% 7699-43-6

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net