Search   
MSDS 
:
 Pentacene, 98%
CAS 
:
 135-48-8
SYNONYMS 
:
 Benzo(B) naphthalene; 2,3:6,7-dibenzanthracene
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 135-48-8 |Pentacene | 98.0 | 205-193-7 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully
investigated.

Potential Health Effects
Eye:
No information regarding eye irritation and other potential effects
was found.
Skin:
No information regarding skin irritation and other potential effects
was found.
Ingestion:
The toxicological properties of this substance have not been fully
investigated.
Inhalation:
The toxicological properties of this substance have not been fully
investigated. Inhalation of dust may cause respiratory tract
irritation.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or
alcohol-resistant foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Sweep up, then place into a suitable container for disposal. Avoid
generating dusty conditions.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Minimize dust generation and accumulation. Avoid contact with eyes,
skin, and clothing. Keep container tightly closed. Avoid ingestion
and inhalation.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 135-48-8:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective clothing to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Powder
Color: black
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: > 300 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: insoluble
Specific Gravity/Density:
Molecular Formula: C22H14
Molecular Weight: 278.34

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, dust generation, strong oxidants.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 135-48-8 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Pentacene -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 135-48-8: No information available.
Canada
CAS# 135-48-8 is listed on Canada's NDSL List.
CAS# 135-48-8 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 135-48-8 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
2,6-Pyridinedicarboxylic Acid Chloride, 97% 3739-94-4
OPD tablets, 120 mg/tablet 615-28-1
Tetrabutylphosphonium bromide, 98% 3115-68-2
2'-Deoxyguanosine 5'-Monophosphate, Sodium Salt Hydrate 52558-16-4
4-(Dimethylamino)pyridinium Bromide Perbromide 92976-81-3
Mercury(ii) thiocyanate, p.a. 592-85-8
Beta-Ionone, Synthetic, 96% 14901-07-6
Quercetin (Pract) 117-39-5
4-Chlorobenzotrichloride, 99% 5216-25-1
1-Iodopropane, 99%, Stabilized over Copper 107-08-4
2-Acetyl-1-methylpyrrole, 99% 932-16-1
4-Dimethylamino-4'-nitrostilbene 4584-57-0
Pentafluorothiophenol, 97% 771-62-0
1-(4-METHOXYPHENYL)-1-CYCLOPROPANE- CARBONITRILE 16728-00-0
Triphenylthioantimonate, 99% 28609-58-7
4-Methylthiazole, 99% 693-95-8
DL-2-Amino-1-Propanol, 98% 6168-72-5
2,5-Diphenyl-p-benzoquinone (pract), 93% (uv-vis) 844-51-9
4-Methylbenzyltriphenylphosphonium chloride, 99% 1530-37-6
L-(+)-Prolinol 23356-96-9
Prostaglandin VIII, 99% 0-01-1
Allyl alcohol 107-18-6
Phosphorus Tribromide, 99% 7789-60-8
5-Nitroisoquinoline, 98% 607-32-9
1,3-Acetonedicarboxylic acid, 96% 542-05-2
Pentacene, 98% 135-48-8
3,3'-Dimethoxybenzidine dihydrochloride, 99% (titr.) 20325-40-0
Diethyl Bis(hydroxymethyl)malonate, 95% (HPLC) 20605-01-0
P-Bromo-DL-Phenylalanine, 99% 14091-15-7
1,2-(Didodecyloxy)benzene, 98% (GC) 42244-53-1
p-Anisaldehyde, 99+% 123-11-5
Diazogen, 99% 80-11-5
2-Fluoro-4-Nitrotoluene, 98% 1427-07-2
Sodium triacetoxyborohydride 56553-60-7
Indole-2-carboxylic acid, 99% 1477-50-5
Pyridoxine Hydrochloride, 99% (Titr.) 58-56-0
2,6-Dichlorophenol 87-65-0
1,2-Butanediol, 98% 26171-83-5
2-(2-Aminoethoxy)ethanol, 98% 929-06-6
Poly(propylene Glycol), Average M.W. 425 25322-69-4
Valinomycin, 96% (HPLC) 2001-95-8
7-Amino-4-Methyl-1,8-Naphthyridin-2-ol, 98 % 1569-15-9
Benzyl butyrate, 98% 103-37-7
Lutetium oxide, 99.99%, -325 mesh 12032-20-1
P-Nitrophenyl Chloroformate, 96% (Titr.) 7693-46-1
Potassium sorbate, 99% 590-00-1
Phthalan, 97% 496-14-0
Cinnamyl Acetate, 99+% 103-54-8
Butyl Isocyanatoacetate, 98% (GC) 17046-22-9
Zirconyl(IV) chloride octahydrate, 98+% 7699-43-6

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net