**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 1077-16-3 |1-Phenylhexane | 97 | 214-070-7 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Not available.
Potential Health Effects
Eye:
May cause eye irritation. May cause chemical conjunctivitis and
corneal damage.
Skin:
May cause irritation and dermatitis. May cause cyanosis of the
extremities.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea.
Inhalation:
Aspiration may lead to pulmonary edema. Inhalation at high
concentrations may cause CNS depression and asphixiation.
Chronic:
Effects may be delayed.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If breathing
is difficult, give oxygen. Get medical aid. Do NOT use mouth-to-mouth
resuscitation.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Use water
spray to keep fire-exposed containers cool. Combustible liquid.
Vapors may be heavier than air. They can spread along the ground and
collect in low or confined areas. Containers may explode when heated.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or
alcohol-resistant foam. Use water spray to cool fire-exposed
containers. Water may be ineffective.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Remove all sources of ignition. Use
a spark-proof tool.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use only in a well-ventilated area. Avoid contact
with eyes, skin, and clothing. Empty containers retain product
residue, (liquid and/or vapor), and can be dangerous. Keep away from
heat, sparks and flame. Avoid ingestion and inhalation. Do not
pressurize, cut, weld, braze, solder, drill, grind, or expose empty
containers to heat, sparks or open flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 1077-16-3:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Liquid
Color: clear, colorless
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 226 deg C @ 760.00mmHg
Freezing/Melting Point: -61 deg C
Autoignition Temperature: Not applicable.
Flash Point: 83 deg C ( 181.40 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Not available.
Specific Gravity/Density: .8610g/cm3
Molecular Formula: C12H18
Molecular Weight: 162.27
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, ignition sources, excess heat, strong
oxidants.
Incompatibilities with Other Materials:
Oxidizing agents
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide.
Hazardous Polymerization: Has not been reported.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 1077-16-3 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
1-Phenylhexane -
Not listed by ACGIH, IARC, or NTP.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S
.*
Hazard Class: 9
UN Number: 3082
Packing Group: III
IMO
Shipping Name: ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S
.
Hazard Class: 9
UN Number: 3082
Packing Group: III
RID/ADR
Shipping Name: ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S
.
Hazard Class: 9
UN Number: 3082
Packing group: III
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 1077-16-3: No information available.
Canada
CAS# 1077-16-3 is listed on Canada's NDSL List.
CAS# 1077-16-3 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 1077-16-3 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 9/02/1997 Revision #4 Date: 3/18/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
1-Naphthyl isothiocyanate, 98%
| 551-06-4 |
|
2-Iodoaniline, 98%
| 615-43-0 |
|
DL-Alpha-Methyltyrosine, 98%
| 658-48-0 |
|
6-Chloropurine Riboside, 99+%
| 2004-06-0 |
|
2-Amino-4,4,4-trifluorobutyric acid
| 15960-05-1 |
|
4-Fluorophenol, 99%
| 371-41-5 |
|
4-Methyl-1-tetralone, 97%
| 19832-98-5 |
|
3,3'-Thiodipropionic Acid, 99%
| 111-17-1 |
|
Diaminomaleonitrile, 98%
| 1187-42-4 |
|
2-Butoxyethyl acetate, 98%
| 112-07-2 |
|
Chromocene
| 1271-24-5 |
|
Arsenazo III, 95% (HPLC)
| 1668-00-4 |
|
3-Dimethylaminophenol, 97+% (TLC)
| 99-07-0 |
|
2-Amino-4-Fluorobenzoic Acid, 96% (GC)
| 446-32-2 |
|
Dimethyl Phenylphosphonite, 98%
| 2946-61-4 |
|
Pinacolone, 97% (gc)
| 75-97-8 |
|
1-Phenylhexane, 97%
| 1077-16-3 |
|
Ethyl chrysanthemumate, 95%, mixture of cis/trans
| 97-41-6 |
|
Triethylamine Hydrochloride, 99+%
| 554-68-7 |
|
cis-Dicyclohexano-18-crown-6, cis-syn-cis isomer, 98+%
| 15128-65-1 |
|
2-Hydrazino-2-Imidazoline Hydrobromide, 98 %
| 55959-84-7 |
|
N-Methyl-m-toluidine
| 696-44-6 |
|
4-Ethoxyphenol
| 622-62-8 |
|
Tris(4-Chlorophenyl)Phosphine
| 1159-54-2 |
|
4-Bromo-2-fluorotoluene 98%
| 51436-99-8 |
|
7-Azaindole, 98%
| 271-63-6 |
|
1-Nitroso-2-naphtol-3,6-disulfonic acid disodium salt (pract), 95%
| 525-05-3 |
|
(S)-3-Hydroxy-3-Phenylpropanoic Acid
| 36567-72-3 |
|
Anthranilic acid, 98+%
| 118-92-3 |
|
Malonic Acid Disodium Salt Monohydrate, 99% (Titr.)
| 141-95-7 |
|
4-Chlorophenyl 2-Chloro-1,1,2-Trifluoro-Ethyl Sulfone, 98%
| 26574-59-4 |
|
2-Hexanone, 98%
| 591-78-6 |
|
2,2-Dimethylsuccinic Acid, 99%
| 597-43-3 |
|
O-Methoxybiphenyl, 98+%
| 86-26-0 |
|
2-Naphthol, 99+%
| 135-19-3 |
|
Ethylidenecyclohexane, 99%
| 1003-64-1 |
|
2,4,6-Trichlorophenol, 98%
| 88-06-2 |
|
Brilliant Cresyl Blue , High Purity Biological Stain
| 81029-05-2 |
|
Hydrocinnamoylchloride, 98%
| 645-45-4 |
|
Methacrylic acid, 99.5% (stabilized with ca 250 ppm MEHQ)
| 79-41-4 |
|
4-Aminosalicylic acid, 99%
| 65-49-6 |
|
3-Bromopropionic Acid, 99% (Titr.)
| 590-92-1 |
|
2-Ethylbutyraldehyde, 98%
| 97-96-1 |
|
2-Fluoro-5-Nitroaniline, 98%
| 369-36-8 |
|
Heptafluoro-n-propyliodide, 99%, stabilized with copper
| 754-34-7 |
|
3-Formyl-2-Methyl-5-Nitroindole, 95+%
| 3558-17-6 |
|
Crotononitrile (pract), 98% (gc)
| 4786-20-3 |
|
Praseodymium(iii,iv) oxide, 99.9%
| 12037-29-5 |
|
N-(4-Hydroxyphenyl)-Glycine, 99%
| 122-87-2 |
|
Cresol Red, indicator grade
| 1733-12-6 |
|
|