Search   
MSDS 
:
 4-Ethoxyphenol
CAS 
:
 622-62-8
SYNONYMS 
:
 Hydroquinone monoethyl ether
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 622-62-8 |4-Ethoxyphenol | | 210-748-1 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.The toxicological
properties of this material have not been fully investigated.

Potential Health Effects
Eye:
Causes eye irritation.
Skin:
Causes skin irritation.
Ingestion:
May cause irritation of the digestive tract. The toxicological
properties of this substance have not been fully investigated.
Inhalation:
Causes respiratory tract irritation.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or
alcohol-resistant foam. Use water spray, dry chemical, carbon
dioxide, or chemical foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up, then place into a suitable container for
disposal. Avoid generating dusty conditions. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Minimize dust
generation and accumulation. Avoid contact with eyes, skin, and
clothing. Keep container tightly closed. Avoid ingestion and
inhalation.
Storage:
Keep container closed when not in use. Store in a tightly closed
container. Store in a cool, dry, well-ventilated area away from
incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 622-62-8:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Crystals
Color: peach
Odor: none reported
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 246-247C
Freezing/Melting Point: 64.50 - 67.50 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: slightly soluble
Specific Gravity/Density:
Molecular Formula: C8H10O2
Molecular Weight: 138.17

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, dust generation, strong oxidants.
Incompatibilities with Other Materials:
Strong oxidizing agents - strong bases.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 622-62-8: SL3790000
LD50/LC50:
Not available.
Carcinogenicity:
4-Ethoxyphenol -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 37/39 Wear suitable gloves and eye/face
protection.
WGK (Water Danger/Protection)
CAS# 622-62-8: No information available.
Canada
CAS# 622-62-8 is listed on Canada's DSL List.
CAS# 622-62-8 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 622-62-8 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 8/05/1998 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
1-Naphthyl isothiocyanate, 98% 551-06-4
2-Iodoaniline, 98% 615-43-0
DL-Alpha-Methyltyrosine, 98% 658-48-0
6-Chloropurine Riboside, 99+% 2004-06-0
2-Amino-4,4,4-trifluorobutyric acid 15960-05-1
4-Fluorophenol, 99% 371-41-5
4-Methyl-1-tetralone, 97% 19832-98-5
3,3'-Thiodipropionic Acid, 99% 111-17-1
Diaminomaleonitrile, 98% 1187-42-4
2-Butoxyethyl acetate, 98% 112-07-2
Chromocene 1271-24-5
Arsenazo III, 95% (HPLC) 1668-00-4
3-Dimethylaminophenol, 97+% (TLC) 99-07-0
2-Amino-4-Fluorobenzoic Acid, 96% (GC) 446-32-2
Dimethyl Phenylphosphonite, 98% 2946-61-4
Pinacolone, 97% (gc) 75-97-8
1-Phenylhexane, 97% 1077-16-3
Ethyl chrysanthemumate, 95%, mixture of cis/trans 97-41-6
Triethylamine Hydrochloride, 99+% 554-68-7
cis-Dicyclohexano-18-crown-6, cis-syn-cis isomer, 98+% 15128-65-1
2-Hydrazino-2-Imidazoline Hydrobromide, 98 % 55959-84-7
N-Methyl-m-toluidine 696-44-6
4-Ethoxyphenol 622-62-8
Tris(4-Chlorophenyl)Phosphine 1159-54-2
4-Bromo-2-fluorotoluene 98% 51436-99-8
7-Azaindole, 98% 271-63-6
1-Nitroso-2-naphtol-3,6-disulfonic acid disodium salt (pract), 95% 525-05-3
(S)-3-Hydroxy-3-Phenylpropanoic Acid 36567-72-3
Anthranilic acid, 98+% 118-92-3
Malonic Acid Disodium Salt Monohydrate, 99% (Titr.) 141-95-7
4-Chlorophenyl 2-Chloro-1,1,2-Trifluoro-Ethyl Sulfone, 98% 26574-59-4
2-Hexanone, 98% 591-78-6
2,2-Dimethylsuccinic Acid, 99% 597-43-3
O-Methoxybiphenyl, 98+% 86-26-0
2-Naphthol, 99+% 135-19-3
Ethylidenecyclohexane, 99% 1003-64-1
2,4,6-Trichlorophenol, 98% 88-06-2
Brilliant Cresyl Blue , High Purity Biological Stain 81029-05-2
Hydrocinnamoylchloride, 98% 645-45-4
Methacrylic acid, 99.5% (stabilized with ca 250 ppm MEHQ) 79-41-4
4-Aminosalicylic acid, 99% 65-49-6
3-Bromopropionic Acid, 99% (Titr.) 590-92-1
2-Ethylbutyraldehyde, 98% 97-96-1
2-Fluoro-5-Nitroaniline, 98% 369-36-8
Heptafluoro-n-propyliodide, 99%, stabilized with copper 754-34-7
3-Formyl-2-Methyl-5-Nitroindole, 95+% 3558-17-6
Crotononitrile (pract), 98% (gc) 4786-20-3
Praseodymium(iii,iv) oxide, 99.9% 12037-29-5
N-(4-Hydroxyphenyl)-Glycine, 99% 122-87-2
Cresol Red, indicator grade 1733-12-6

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net