**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 591-78-6 |2-Hexanone | 98 | 209-731-1 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: T
Risk Phrases: 10 48/23 62 67
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Flammable. Toxic : danger of serious damage to health by prolonged
exposure through inhalation. Possible risk of impaired fertility.
Vapours may cause drowsiness and dizziness.
Potential Health Effects
Eye:
Causes mild eye irritation. Causes minor transient corneal injury.
Skin:
Causes mild skin irritation. May be absorbed through the skin in
harmful amounts. Prolonged and/or repeated contact may cause
defatting of the skin and dermatitis.
Ingestion:
May cause irritation of the digestive tract. May cause central
nervous system depression.
Inhalation:
Causes respiratory tract irritation. May cause narcotic effects in
high concentration. May cause drowsiness, unconsciousness, and
central nervous system depression.
Chronic:
Prolonged or repeated skin contact may cause dermatitis. Chronic
exposure produces peripheral neuropathy.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Flush skin with plenty of water for at least 15 minutes while
removing contaminated clothing and shoes. Get medical aid if
irritation develops or persists.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid if cough or other symptoms appear.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Vapors may form an explosive mixture with air.
Vapors can travel to a source of ignition and flash back. Containers
may explode in the heat of a fire. Flammable liquid and vapor. Vapors
may be heavier than air. They can spread along the ground and
collect in low or confined areas.
Extinguishing Media:
For small fires, use dry chemical, carbon dioxide, water spray or
alcohol-resistant foam. Use water spray to cool fire-exposed
containers. Water may be ineffective. For large fires, use water
spray, fog or alcohol-resistant foam. Do NOT use straight streams of
water.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Remove all sources of ignition.
Provide ventilation.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Use only in a well-ventilated area.
Ground and bond containers when transferring material. Avoid contact
with eyes, skin, and clothing. Empty containers retain product
residue, (liquid and/or vapor), and can be dangerous. Keep container
tightly closed. Keep away from heat, sparks and flame. Avoid
ingestion and inhalation. Do not pressurize, cut, weld, braze,
solder, drill, grind, or expose empty containers to heat, sparks or
open flames.
Storage:
Keep away from sources of ignition. Store in a cool, dry place.
Store in a tightly closed container. Flammables-area.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate general or
local exhaust ventilation to keep airborne concentrations below the
permissible exposure limits.
Exposure Limits
CAS# 591-78-6:
United Kingdom, WEL - TWA: 5 ppm TWA; 21 mg/m3 TWA
United Kingdom, WEL - STEL: 15 ppm STEL; 63 mg/m3 STEL
United States OSHA: 100 ppm TWA; 410 mg/m3 TWA
Belgium - TWA: 5 ppm VLE; 20 mg/m3 VLE
France - VME: 5 ppm VME; 20 mg/m3 VME
France - VLE: 8 ppm VLE; 35 mg/m3 VLE
Germany: 5 ppm TWA; 21 mg/m3 TWA
Germany: Skin absorber
Japan: 5 ppm OEL; 20 mg/m3 OEL
Malaysia: 5 ppm TWA; 20 mg/m3 TWA
Netherlands: 0.5 ppm MAC; 2 mg/m3 MAC
Spain: 5 ppm VLA-ED; 21 mg/m3 VLA-ED
Personal Protective Equipment
Eyes:
Wear chemical splash goggles.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Liquid
Color: clear colorless to faint yellow
Odor: acetone-like - pungent odor
pH: Not available.
Vapor Pressure: 3.8 mm Hg @ 25 deg C
Viscosity: 0.62cP @20C
Boiling Point: 128 deg C
Freezing/Melting Point: -57 deg C
Autoignition Temperature: 423 deg C ( 793.40 deg F)
Flash Point: 23 deg C ( 73.40 deg F)
Explosion Limits, lower: 1.2 vol %
Explosion Limits, upper: 8.00 vol %
Decomposition Temperature:
Solubility in water: Slightly soluble.
Specific Gravity/Density: 0.8
Molecular Formula: C6H12O
Molecular Weight: 100.16
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, ignition sources.
Incompatibilities with Other Materials:
Oxidizing agents, reducing agents, strong bases.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide.
Hazardous Polymerization: Will not occur.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 591-78-6: MP1400000
LD50/LC50:
CAS# 591-78-6: Draize test, rabbit, eye: 500 mg/24H Mild; Draize
test, rabbit, skin: 500 mg/24H Mild; Inhalation, rat: LC50 = 8000
ppm/4H; Oral, mouse: LD50 = 2430 mg/kg; Oral, rat: LD50 = 2590 mg/kg;
Skin, rabbit: LD50 = 4800 mg/kg.
Carcinogenicity:
2-Hexanone -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: KETONES, LIQUID, N.O.S.*
Hazard Class: 3
UN Number: 1224
Packing Group: III
IMO
Shipping Name: KETONES, LIQUID, N.O.S.
Hazard Class: 3.3
UN Number: 1224
Packing Group: III
RID/ADR
Shipping Name: KETONES, N.O.S.
Hazard Class: 3
UN Number: 1224
Packing group: III
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: T
Risk Phrases:
R 10 Flammable.
R 48/23 Toxic : danger of serious damage to health
by prolonged exposure through inhalation.
R 62 Possible risk of impaired fertility.
R 67 Vapours may cause drowsiness and dizziness.
Safety Phrases:
S 36/37 Wear suitable protective clothing and
gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 591-78-6: 1
Canada
CAS# 591-78-6 is listed on Canada's DSL List.
CAS# 591-78-6 is listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 591-78-6 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 9/02/1997 Revision #4 Date: 1/05/2005
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
1-Naphthyl isothiocyanate, 98%
| 551-06-4 |
|
2-Iodoaniline, 98%
| 615-43-0 |
|
DL-Alpha-Methyltyrosine, 98%
| 658-48-0 |
|
6-Chloropurine Riboside, 99+%
| 2004-06-0 |
|
2-Amino-4,4,4-trifluorobutyric acid
| 15960-05-1 |
|
4-Fluorophenol, 99%
| 371-41-5 |
|
4-Methyl-1-tetralone, 97%
| 19832-98-5 |
|
3,3'-Thiodipropionic Acid, 99%
| 111-17-1 |
|
Diaminomaleonitrile, 98%
| 1187-42-4 |
|
2-Butoxyethyl acetate, 98%
| 112-07-2 |
|
Chromocene
| 1271-24-5 |
|
Arsenazo III, 95% (HPLC)
| 1668-00-4 |
|
3-Dimethylaminophenol, 97+% (TLC)
| 99-07-0 |
|
2-Amino-4-Fluorobenzoic Acid, 96% (GC)
| 446-32-2 |
|
Dimethyl Phenylphosphonite, 98%
| 2946-61-4 |
|
Pinacolone, 97% (gc)
| 75-97-8 |
|
1-Phenylhexane, 97%
| 1077-16-3 |
|
Ethyl chrysanthemumate, 95%, mixture of cis/trans
| 97-41-6 |
|
Triethylamine Hydrochloride, 99+%
| 554-68-7 |
|
cis-Dicyclohexano-18-crown-6, cis-syn-cis isomer, 98+%
| 15128-65-1 |
|
2-Hydrazino-2-Imidazoline Hydrobromide, 98 %
| 55959-84-7 |
|
N-Methyl-m-toluidine
| 696-44-6 |
|
4-Ethoxyphenol
| 622-62-8 |
|
Tris(4-Chlorophenyl)Phosphine
| 1159-54-2 |
|
4-Bromo-2-fluorotoluene 98%
| 51436-99-8 |
|
7-Azaindole, 98%
| 271-63-6 |
|
1-Nitroso-2-naphtol-3,6-disulfonic acid disodium salt (pract), 95%
| 525-05-3 |
|
(S)-3-Hydroxy-3-Phenylpropanoic Acid
| 36567-72-3 |
|
Anthranilic acid, 98+%
| 118-92-3 |
|
Malonic Acid Disodium Salt Monohydrate, 99% (Titr.)
| 141-95-7 |
|
4-Chlorophenyl 2-Chloro-1,1,2-Trifluoro-Ethyl Sulfone, 98%
| 26574-59-4 |
|
2-Hexanone, 98%
| 591-78-6 |
|
2,2-Dimethylsuccinic Acid, 99%
| 597-43-3 |
|
O-Methoxybiphenyl, 98+%
| 86-26-0 |
|
2-Naphthol, 99+%
| 135-19-3 |
|
Ethylidenecyclohexane, 99%
| 1003-64-1 |
|
2,4,6-Trichlorophenol, 98%
| 88-06-2 |
|
Brilliant Cresyl Blue , High Purity Biological Stain
| 81029-05-2 |
|
Hydrocinnamoylchloride, 98%
| 645-45-4 |
|
Methacrylic acid, 99.5% (stabilized with ca 250 ppm MEHQ)
| 79-41-4 |
|
4-Aminosalicylic acid, 99%
| 65-49-6 |
|
3-Bromopropionic Acid, 99% (Titr.)
| 590-92-1 |
|
2-Ethylbutyraldehyde, 98%
| 97-96-1 |
|
2-Fluoro-5-Nitroaniline, 98%
| 369-36-8 |
|
Heptafluoro-n-propyliodide, 99%, stabilized with copper
| 754-34-7 |
|
3-Formyl-2-Methyl-5-Nitroindole, 95+%
| 3558-17-6 |
|
Crotononitrile (pract), 98% (gc)
| 4786-20-3 |
|
Praseodymium(iii,iv) oxide, 99.9%
| 12037-29-5 |
|
N-(4-Hydroxyphenyl)-Glycine, 99%
| 122-87-2 |
|
Cresol Red, indicator grade
| 1733-12-6 |
|
|