**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 645-45-4 |Hydrocinnamoyl chloride | 98 | 211-443-6 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 34
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Causes burns.Moisture sensitive.Corrosive.Lachrymator (substance
which increases the flow of tears).Stench.
Potential Health Effects
Eye:
Causes eye burns. Lachrymator (substance which increases the flow
of tears). May cause chemical conjunctivitis and corneal damage.
Skin:
Causes skin burns. May cause skin rash (in milder cases), and cold
and clammy skin with cyanosis or pale color.
Ingestion:
May cause severe and permanent damage to the digestive tract. Causes
gastrointestinal tract burns. May cause perforation of the digestive
tract. May cause systemic effects.
Inhalation:
Causes chemical burns to the respiratory tract. Inhalation may be
fatal as a result of spasm, inflammation, edema of the larynx and
bronchi, chemical pneumonitis and pulmonary edema. Aspiration may
lead to pulmonary edema. May cause burning sensation, coughing,
wheezing, laryngitis, shortness of breath, headache, nausea, and
vomiting.
Chronic:
Effects may be delayed.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately. Do NOT allow victim to rub eyes or keep eyes closed.
Extensive irrigation with water is required (at least 30 minutes).
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes. Wash clothing before reuse. Destroy contaminated shoes.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid immediately. Do NOT induce vomiting. If conscious and alert,
rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. Do not use mouth-to-mouth resuscitation if victim
ingested or inhaled the substance; induce artificial respiration with
the aid of a pocket mask equipped with a one-way valve or other
proper respiratory medical device.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Water
hydrolyzes material liberating acidic gas which in contact with metal
surfaces can generate flammable and/or explosive hydrogen gas.
Extinguishing Media:
Do NOT use water directly on fire. Use foam, dry chemical, or carbon
dioxide. Do NOT get water inside containers.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Cover with sand, dry lime or soda ash and place in
a closed container for disposal. Provide ventilation.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Use only in a well-ventilated area.
Keep container tightly closed. Do not get on skin or in eyes. Do not
ingest or inhale. Do not allow contact with water. Use only in a
chemical fume hood. Discard contaminated shoes. Keep from contact
with moist air and steam.
Storage:
Corrosives area. Keep containers tightly closed. Store protected
from moisture. Store in a cool, dry area away from incompatible
substances.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 645-45-4:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Liquid
Color: clear colorless to faint yellow
Odor: stench
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 107 deg C @ 11.00mmHg
Freezing/Melting Point: -7.00 to - 5.00 deg C
Autoignition Temperature: Not applicable.
Flash Point: 108 deg C ( 226.40 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: decomposes in water
Specific Gravity/Density: 1.1370g/cm3
Molecular Formula: C9H9ClO
Molecular Weight: 168.62
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable. However, may decompose if exposed to moist air or water.
Conditions to Avoid:
Incompatible materials, moisture.
Incompatibilities with Other Materials:
Oxidizing agents, strong bases, alcohols, moisture, water.
Hazardous Decomposition Products:
Hydrogen chloride, phosgene, carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 645-45-4: MW5652395
LD50/LC50:
CAS# 645-45-4: Inhalation, rat: LC50 = 2750 mg/m3/4H.
Carcinogenicity:
Hydrocinnamoyl chloride -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
Other
No information available.
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: CORROSIVE LIQUID, N.O.S.*
Hazard Class: 8
UN Number: 1760
Packing Group: II
IMO
Shipping Name: CORROSIVE LIQUID, N.O.S.
Hazard Class: 8
UN Number: 1760
Packing Group: II
RID/ADR
Shipping Name: CORROSIVE LIQUID, N.O.S.
Hazard Class: 8
UN Number: 1760
Packing group: II
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
WGK (Water Danger/Protection)
CAS# 645-45-4: No information available.
Canada
CAS# 645-45-4 is listed on Canada's NDSL List.
CAS# 645-45-4 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 645-45-4 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 7/28/1999 Revision #4 Date: 3/18/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
1-Naphthyl isothiocyanate, 98%
| 551-06-4 |
|
2-Iodoaniline, 98%
| 615-43-0 |
|
DL-Alpha-Methyltyrosine, 98%
| 658-48-0 |
|
6-Chloropurine Riboside, 99+%
| 2004-06-0 |
|
2-Amino-4,4,4-trifluorobutyric acid
| 15960-05-1 |
|
4-Fluorophenol, 99%
| 371-41-5 |
|
4-Methyl-1-tetralone, 97%
| 19832-98-5 |
|
3,3'-Thiodipropionic Acid, 99%
| 111-17-1 |
|
Diaminomaleonitrile, 98%
| 1187-42-4 |
|
2-Butoxyethyl acetate, 98%
| 112-07-2 |
|
Chromocene
| 1271-24-5 |
|
Arsenazo III, 95% (HPLC)
| 1668-00-4 |
|
3-Dimethylaminophenol, 97+% (TLC)
| 99-07-0 |
|
2-Amino-4-Fluorobenzoic Acid, 96% (GC)
| 446-32-2 |
|
Dimethyl Phenylphosphonite, 98%
| 2946-61-4 |
|
Pinacolone, 97% (gc)
| 75-97-8 |
|
1-Phenylhexane, 97%
| 1077-16-3 |
|
Ethyl chrysanthemumate, 95%, mixture of cis/trans
| 97-41-6 |
|
Triethylamine Hydrochloride, 99+%
| 554-68-7 |
|
cis-Dicyclohexano-18-crown-6, cis-syn-cis isomer, 98+%
| 15128-65-1 |
|
2-Hydrazino-2-Imidazoline Hydrobromide, 98 %
| 55959-84-7 |
|
N-Methyl-m-toluidine
| 696-44-6 |
|
4-Ethoxyphenol
| 622-62-8 |
|
Tris(4-Chlorophenyl)Phosphine
| 1159-54-2 |
|
4-Bromo-2-fluorotoluene 98%
| 51436-99-8 |
|
7-Azaindole, 98%
| 271-63-6 |
|
1-Nitroso-2-naphtol-3,6-disulfonic acid disodium salt (pract), 95%
| 525-05-3 |
|
(S)-3-Hydroxy-3-Phenylpropanoic Acid
| 36567-72-3 |
|
Anthranilic acid, 98+%
| 118-92-3 |
|
Malonic Acid Disodium Salt Monohydrate, 99% (Titr.)
| 141-95-7 |
|
4-Chlorophenyl 2-Chloro-1,1,2-Trifluoro-Ethyl Sulfone, 98%
| 26574-59-4 |
|
2-Hexanone, 98%
| 591-78-6 |
|
2,2-Dimethylsuccinic Acid, 99%
| 597-43-3 |
|
O-Methoxybiphenyl, 98+%
| 86-26-0 |
|
2-Naphthol, 99+%
| 135-19-3 |
|
Ethylidenecyclohexane, 99%
| 1003-64-1 |
|
2,4,6-Trichlorophenol, 98%
| 88-06-2 |
|
Brilliant Cresyl Blue , High Purity Biological Stain
| 81029-05-2 |
|
Hydrocinnamoylchloride, 98%
| 645-45-4 |
|
Methacrylic acid, 99.5% (stabilized with ca 250 ppm MEHQ)
| 79-41-4 |
|
4-Aminosalicylic acid, 99%
| 65-49-6 |
|
3-Bromopropionic Acid, 99% (Titr.)
| 590-92-1 |
|
2-Ethylbutyraldehyde, 98%
| 97-96-1 |
|
2-Fluoro-5-Nitroaniline, 98%
| 369-36-8 |
|
Heptafluoro-n-propyliodide, 99%, stabilized with copper
| 754-34-7 |
|
3-Formyl-2-Methyl-5-Nitroindole, 95+%
| 3558-17-6 |
|
Crotononitrile (pract), 98% (gc)
| 4786-20-3 |
|
Praseodymium(iii,iv) oxide, 99.9%
| 12037-29-5 |
|
N-(4-Hydroxyphenyl)-Glycine, 99%
| 122-87-2 |
|
Cresol Red, indicator grade
| 1733-12-6 |
|
|