Search   
MSDS 
:
 N-Methyl-m-toluidine
CAS 
:
 696-44-6
SYNONYMS 
:
 N,3-Dimethylbenzenamine; N-Methyl-m-aminotoluene.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 696-44-6 |N-Methyl-m-toluidine | 99 | 211-795-0 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: T
Risk Phrases: 23/24/25 33 52/53

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Toxic by inhalation, in contact with skin and if swallowed. Danger
of cumulative effects. Harmful to aquatic organisms, may cause
long-term adverse effects in the aquatic environment.Dangerous for
the environment.

Potential Health Effects
Eye:
Causes eye irritation.
Skin:
Causes skin irritation. Harmful if absorbed through the skin.
Ingestion:
Harmful if swallowed. May cause gastrointestinal irritation with
nausea, vomiting and diarrhea. May form methemoglobin which in
sufficient concentration causes cyanosis (bluish discoloration of
skin due to deficient oxygenation of the blood).
Inhalation:
Causes respiratory tract irritation. Inhalation causes anoxia due to
the formation of methemoglobin and hematuria. Inhalation at high
concentrations may cause CNS depression and asphixiation.
Chronic:
Chronic exposure may cause anemia, kidney damage, and
methemoglobinemia.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Get medical aid. Do NOT induce vomiting. If conscious and alert,
rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid. Do NOT use mouth-to-mouth
resuscitation. If breathing has ceased apply artificial respiration
using oxygen and a suitable mechanical device such as a bag and a
mask.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Use water
spray to keep fire-exposed containers cool. Water may be ineffective.
Material is lighter than water and a fire may be spread by the use of
water. Combustible liquid. Vapors may be heavier than air. They can
spread along the ground and collect in low or confined areas.
Containers may explode when heated.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Use a spark-proof tool. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Avoid contact with
eyes, skin, and clothing. Empty containers retain product residue,
(liquid and/or vapor), and can be dangerous. Keep container tightly
closed. Avoid ingestion and inhalation. Do not pressurize, cut, weld,
braze, solder, drill, grind, or expose empty containers to heat,
sparks or open flames. Keep away from heat and flame.
Storage:
Keep away from sources of ignition. Store in a tightly closed
container. Store in a cool, dry, well-ventilated area away from
incompatible substances. Store protected from light.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 696-44-6:


Personal Protective Equipment

Eyes:
Wear chemical splash goggles.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear yellow
Odor: amine-like
pH: Not available.
Vapor Pressure: 0.65 mm Hg @ 25 deg C
Viscosity: Not available.
Boiling Point: 206 deg C
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: 91 deg C ( 195.80 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: insoluble or very slight
Specific Gravity/Density: .9500 g/ml
Molecular Formula: C8H11N
Molecular Weight: 121.18

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures. May discolor on
exposure to light.
Conditions to Avoid:
Light, ignition sources, excess heat.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 696-44-6 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
N-Methyl-m-toluidine -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: TOXIC LIQUID, ORGANIC, N.O.S.*
Hazard Class: 6.1
UN Number: 2810
Packing Group: III
IMO
Shipping Name: TOXIC LIQUID, ORGANIC, N.O.S.
Hazard Class: 6.1
UN Number: 2810
Packing Group: III
RID/ADR
Shipping Name: TOXIC LIQUID, ORGANIC, N.O.S.
Hazard Class: 6.1
UN Number: 2810
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: T
Risk Phrases:
R 23/24/25 Toxic by inhalation, in contact with skin
and if swallowed.
R 33 Danger of cumulative effects.
R 52/53 Harmful to aquatic organisms, may cause
long-term adverse effects in the aquatic environment.
Safety Phrases:
S 28A After contact with skin, wash immediately with
plenty of water.
S 36/37 Wear suitable protective clothing and
gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
S 61 Avoid release to the environment. Refer to
special instructions/safety data sheets.
WGK (Water Danger/Protection)
CAS# 696-44-6: No information available.
Canada
CAS# 696-44-6 is listed on Canada's NDSL List.
CAS# 696-44-6 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 696-44-6 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 7/20/1999 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
1-Naphthyl isothiocyanate, 98% 551-06-4
2-Iodoaniline, 98% 615-43-0
DL-Alpha-Methyltyrosine, 98% 658-48-0
6-Chloropurine Riboside, 99+% 2004-06-0
2-Amino-4,4,4-trifluorobutyric acid 15960-05-1
4-Fluorophenol, 99% 371-41-5
4-Methyl-1-tetralone, 97% 19832-98-5
3,3'-Thiodipropionic Acid, 99% 111-17-1
Diaminomaleonitrile, 98% 1187-42-4
2-Butoxyethyl acetate, 98% 112-07-2
Chromocene 1271-24-5
Arsenazo III, 95% (HPLC) 1668-00-4
3-Dimethylaminophenol, 97+% (TLC) 99-07-0
2-Amino-4-Fluorobenzoic Acid, 96% (GC) 446-32-2
Dimethyl Phenylphosphonite, 98% 2946-61-4
Pinacolone, 97% (gc) 75-97-8
1-Phenylhexane, 97% 1077-16-3
Ethyl chrysanthemumate, 95%, mixture of cis/trans 97-41-6
Triethylamine Hydrochloride, 99+% 554-68-7
cis-Dicyclohexano-18-crown-6, cis-syn-cis isomer, 98+% 15128-65-1
2-Hydrazino-2-Imidazoline Hydrobromide, 98 % 55959-84-7
N-Methyl-m-toluidine 696-44-6
4-Ethoxyphenol 622-62-8
Tris(4-Chlorophenyl)Phosphine 1159-54-2
4-Bromo-2-fluorotoluene 98% 51436-99-8
7-Azaindole, 98% 271-63-6
1-Nitroso-2-naphtol-3,6-disulfonic acid disodium salt (pract), 95% 525-05-3
(S)-3-Hydroxy-3-Phenylpropanoic Acid 36567-72-3
Anthranilic acid, 98+% 118-92-3
Malonic Acid Disodium Salt Monohydrate, 99% (Titr.) 141-95-7
4-Chlorophenyl 2-Chloro-1,1,2-Trifluoro-Ethyl Sulfone, 98% 26574-59-4
2-Hexanone, 98% 591-78-6
2,2-Dimethylsuccinic Acid, 99% 597-43-3
O-Methoxybiphenyl, 98+% 86-26-0
2-Naphthol, 99+% 135-19-3
Ethylidenecyclohexane, 99% 1003-64-1
2,4,6-Trichlorophenol, 98% 88-06-2
Brilliant Cresyl Blue , High Purity Biological Stain 81029-05-2
Hydrocinnamoylchloride, 98% 645-45-4
Methacrylic acid, 99.5% (stabilized with ca 250 ppm MEHQ) 79-41-4
4-Aminosalicylic acid, 99% 65-49-6
3-Bromopropionic Acid, 99% (Titr.) 590-92-1
2-Ethylbutyraldehyde, 98% 97-96-1
2-Fluoro-5-Nitroaniline, 98% 369-36-8
Heptafluoro-n-propyliodide, 99%, stabilized with copper 754-34-7
3-Formyl-2-Methyl-5-Nitroindole, 95+% 3558-17-6
Crotononitrile (pract), 98% (gc) 4786-20-3
Praseodymium(iii,iv) oxide, 99.9% 12037-29-5
N-(4-Hydroxyphenyl)-Glycine, 99% 122-87-2
Cresol Red, indicator grade 1733-12-6

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net