**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 65-49-6 |4-aminosalicylic acid | 99.0 | 200-613-5 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Light sensitive.Air sensitive.
Potential Health Effects
Eye:
Causes eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract.
Inhalation:
May cause respiratory tract irritation.
Chronic:
No information found.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Get medical
aid if irritation develops or persists. Wash clothing before reuse.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid if cough or other symptoms appear. Get
medical aid.
Notes to Physician:
Antidote:
None reported.
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use agent most appropriate to extinguish fire.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Clean up spills immediately, observing precautions in the
Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation. Place under an inert atmosphere.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Minimize dust generation and accumulation. Avoid breathing dust,
vapor, mist, or gas. Avoid contact with eyes, skin, and clothing.
Keep container tightly closed. Avoid ingestion and inhalation. Store
protected from light. Handle under an inert atmosphere. Store
protected from air.
Storage:
Store in a cool, dry, well-ventilated area away from incompatible
substances. Do not expose to air. Store protected from light. Store
under an inert atmosphere.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 65-49-6:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use. Follow the OSHA
respirator regulations found in 29 CFR 1910.134 or
European Standard EN 149. Use a NIOSH/MSHA or
European Standard EN 149 approved respirator if
exposure limits are exceeded or if irritation or
other symptoms are experienced.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Solid
Color: Not available.
Odor: Odorless or slight acetous
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 147 deg C dec
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: practically insoluble in benzene
Specific Gravity/Density:
Molecular Formula: C7H7NO3
Molecular Weight: 153.14
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, light, exposure to air.
Incompatibilities with Other Materials:
Air.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, irritating and toxic fumes and
gases, carbon dioxide.
Hazardous Polymerization: Has not been reported.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 65-49-6: VO1225000
LD50/LC50:
CAS# 65-49-6: Draize test, rabbit, eye: 100 mg/24H Moderate; Oral,
mouse: LD50 = 4 gm/kg; Oral, rabbit: LD50 = 3650 mg/kg.
Carcinogenicity:
4-aminosalicylic acid -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
S 28A After contact with skin, wash immediately with
plenty of water.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 65-49-6: No information available.
Canada
CAS# 65-49-6 is listed on Canada's NDSL List.
CAS# 65-49-6 is listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 65-49-6 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 4/12/1999 Revision #2 Date: 3/18/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
1-Naphthyl isothiocyanate, 98%
| 551-06-4 |
|
2-Iodoaniline, 98%
| 615-43-0 |
|
DL-Alpha-Methyltyrosine, 98%
| 658-48-0 |
|
6-Chloropurine Riboside, 99+%
| 2004-06-0 |
|
2-Amino-4,4,4-trifluorobutyric acid
| 15960-05-1 |
|
4-Fluorophenol, 99%
| 371-41-5 |
|
4-Methyl-1-tetralone, 97%
| 19832-98-5 |
|
3,3'-Thiodipropionic Acid, 99%
| 111-17-1 |
|
Diaminomaleonitrile, 98%
| 1187-42-4 |
|
2-Butoxyethyl acetate, 98%
| 112-07-2 |
|
Chromocene
| 1271-24-5 |
|
Arsenazo III, 95% (HPLC)
| 1668-00-4 |
|
3-Dimethylaminophenol, 97+% (TLC)
| 99-07-0 |
|
2-Amino-4-Fluorobenzoic Acid, 96% (GC)
| 446-32-2 |
|
Dimethyl Phenylphosphonite, 98%
| 2946-61-4 |
|
Pinacolone, 97% (gc)
| 75-97-8 |
|
1-Phenylhexane, 97%
| 1077-16-3 |
|
Ethyl chrysanthemumate, 95%, mixture of cis/trans
| 97-41-6 |
|
Triethylamine Hydrochloride, 99+%
| 554-68-7 |
|
cis-Dicyclohexano-18-crown-6, cis-syn-cis isomer, 98+%
| 15128-65-1 |
|
2-Hydrazino-2-Imidazoline Hydrobromide, 98 %
| 55959-84-7 |
|
N-Methyl-m-toluidine
| 696-44-6 |
|
4-Ethoxyphenol
| 622-62-8 |
|
Tris(4-Chlorophenyl)Phosphine
| 1159-54-2 |
|
4-Bromo-2-fluorotoluene 98%
| 51436-99-8 |
|
7-Azaindole, 98%
| 271-63-6 |
|
1-Nitroso-2-naphtol-3,6-disulfonic acid disodium salt (pract), 95%
| 525-05-3 |
|
(S)-3-Hydroxy-3-Phenylpropanoic Acid
| 36567-72-3 |
|
Anthranilic acid, 98+%
| 118-92-3 |
|
Malonic Acid Disodium Salt Monohydrate, 99% (Titr.)
| 141-95-7 |
|
4-Chlorophenyl 2-Chloro-1,1,2-Trifluoro-Ethyl Sulfone, 98%
| 26574-59-4 |
|
2-Hexanone, 98%
| 591-78-6 |
|
2,2-Dimethylsuccinic Acid, 99%
| 597-43-3 |
|
O-Methoxybiphenyl, 98+%
| 86-26-0 |
|
2-Naphthol, 99+%
| 135-19-3 |
|
Ethylidenecyclohexane, 99%
| 1003-64-1 |
|
2,4,6-Trichlorophenol, 98%
| 88-06-2 |
|
Brilliant Cresyl Blue , High Purity Biological Stain
| 81029-05-2 |
|
Hydrocinnamoylchloride, 98%
| 645-45-4 |
|
Methacrylic acid, 99.5% (stabilized with ca 250 ppm MEHQ)
| 79-41-4 |
|
4-Aminosalicylic acid, 99%
| 65-49-6 |
|
3-Bromopropionic Acid, 99% (Titr.)
| 590-92-1 |
|
2-Ethylbutyraldehyde, 98%
| 97-96-1 |
|
2-Fluoro-5-Nitroaniline, 98%
| 369-36-8 |
|
Heptafluoro-n-propyliodide, 99%, stabilized with copper
| 754-34-7 |
|
3-Formyl-2-Methyl-5-Nitroindole, 95+%
| 3558-17-6 |
|
Crotononitrile (pract), 98% (gc)
| 4786-20-3 |
|
Praseodymium(iii,iv) oxide, 99.9%
| 12037-29-5 |
|
N-(4-Hydroxyphenyl)-Glycine, 99%
| 122-87-2 |
|
Cresol Red, indicator grade
| 1733-12-6 |
|
|