Search   
MSDS 
:
 Biuret, 99% (TLC)
CAS 
:
 108-19-0
SYNONYMS 
:
 Carbamylurea; Imidocarbonic Diamide; Imdodicarbonic Diamide.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 108-19-0 |Biuret | 99 | 203-559-0 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Hygroscopic (absorbs moisture from the air).

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
Causes gastrointestinal irritation with nausea, vomiting and
diarrhea.
Inhalation:
May cause respiratory tract irritation.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Flush skin with plenty of water for at least 15 minutes while
removing contaminated clothing and shoes. Get medical aid if
irritation develops or persists. Wash clothing before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid if cough or other symptoms appear.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Non-combustible, substance itself does not burn but may decompose
upon heating to produce irritating, corrosive and/or toxic fumes.
Extinguishing Media:
Substance is noncombustible; use agent most appropriate to
extinguish surrounding fire. Use water spray, dry chemical, carbon
dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Clean up spills immediately, observing precautions in the
Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Minimize dust generation and accumulation. Avoid contact with eyes,
skin, and clothing. Keep container tightly closed. Avoid ingestion
and inhalation.
Storage:
Keep from contact with oxidizing materials. Store in a cool, dry,
well-ventilated area away from incompatible substances. Store
protected from moisture.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 108-19-0:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: white
Odor: odorless
pH: Not available.
Vapor Pressure: Negligible
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 354 deg F
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Moderately soluble in water.
Specific Gravity/Density: 1.467
Molecular Formula: NH2CONHCONH2
Molecular Weight: 103.0539

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Incompatible materials, dust generation, moisture, excess heat,
exposure to moist air or water.
Incompatibilities with Other Materials:
Moisture.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, irritating and toxic fumes and
gases, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 108-19-0 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Biuret -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 28A After contact with skin, wash immediately with
plenty of water.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 108-19-0: No information available.
Canada
CAS# 108-19-0 is listed on Canada's DSL List.
CAS# 108-19-0 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 108-19-0 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 5/19/1999 Revision #4 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Sodium peroxide, p.a. 1313-60-6
(+)-(1S,2R)-2-Amino-1-Cyclopentanecarboxylic Acid 64191-14-6
1,2,3,4-Tetrahydroisoquinoline-3-carboxylic acid hydrochloride, 98% 35186-99-3
2-Amino-3-Chloro-5-Nitrobenzonitrile, 98% 20352-84-5
Sodium phosphate, dibasic heptahydrate, reagent ACS, crystals 7558-79-4
Adipic Acid Monomethyl Ester, 98% 627-91-8
4-Methyl-3-nitrophenol, 98% 2042-14-0
6-Fluoroindole, 98% 399-51-9
Potassium sodium tartrate tetrahydrate, p.a. 6381-59-5
Methylboronic acid, 97% 13061-96-6
Sodium Pyrophosphate Decahydrate, P.A. 13472-36-1
Dotriacontane, 99% (GC) 544-85-4
Salicylic Acid, Sodium Salt, P.A. 54-21-7
Sodium sulfate, powder, anhydrous, 99%, p.a. 7757-82-6
4-Chlorobenzyl Chloride, 99+% (GC) 104-83-6
Sodium Sulfite, Anhydrous, P.A. 7757-83-7
Sodium Thiocyanate, Reagent ACS (Crystals) 540-72-7
3-Tolylboronic acid, 97% 17933-03-8
4-Tolylboronic acid, 97% 5720-05-8
4-Chlorophenylboronic Acid, 97% 1679-18-1
3-Fluorophenylboronic Acid, 97% 768-35-4
Sodium Thiosulfate, Anhydrous 7772-98-7
4-Carboxyphenylboronic Acid, 97% 14047-29-1
3-Carboxyphenylboronic acid, 98% 25487-66-5
2-Carboxyphenylboronic acid, 97% 149105-19-1
2-Methoxyphenylboronic Acid, 97% 5720-06-9
Hexahydro-4-Methylphthalic Anhydride, 98% Mixture of Cis and Trans 19438-60-9
Sodium Thiosulfate Pentahydrate, P.A. 10102-17-7
Sodium Tripolyphosphate, Tech., 85% 7758-29-4
Sodium tungstate, dihydrate, reagent acs 10213-10-2
Biuret, 99% (TLC) 108-19-0
Tin(IV) Chloride, 99.999% 7646-78-8
Tin (II) Chloride, Anhydrous, 98% 7772-99-8
Tin (II) Oxide, 98+% 21651-19-4
Tin (II) Sulfate, 99% 7488-55-3
3-Nitrophenylboronic acid, 97% 13331-27-6
(2S,3R)-2-Amino-3-Hydroxy-4-Methylpentanoic Acid, 99+% e.e. 10148-71-7
4-(Methylthio)phenylboronic acid, 97% 98546-51-1
Starch, mais 9005-25-8
Styrene, P.A., Stabilized With 10-15 ppm p-Tert-Butylcatechol 100-42-5
3-Thiopheneboronic acid, 97% 6165-69-1
1,3-Dichloro-1,1,3,3-tetraisopropyldisiloxane, 96% (GC) 69304-37-6
2-Thiopheneboronic acid 6165-68-0
1-Naphthaleneboronic Acid, 97% 13922-41-3
n-Hexylboronic Acid 16343-08-1
Sucrose 57-50-1
Sulfamic Acid, 98+% 5329-14-6
Sulfanilamide, 98% 63-74-1
Ethyl 2-amino-1-cyclopentene-1-carboxylate 99%
Sulfanilic Acid, 99+% 121-57-3

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net