Search   
MSDS 
:
 Tin (II) Chloride, Anhydrous, 98%
CAS 
:
 7772-99-8
SYNONYMS 
:
 Stannous chloride anhydrous; Tin dichloride; Tin protochloride
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 7772-99-8 |Stannous chloride | 98 | 231-868-0 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XN
Risk Phrases: 22 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Harmful if swallowed. Irritating to eyes, respiratory system and
skin.Hygroscopic.

Potential Health Effects
Eye:
May cause severe eye irritation.
Skin:
Causes skin irritation. Causes redness and pain.
Ingestion:
Harmful if swallowed. May cause gastrointestinal irritation with
nausea, vomiting and diarrhea. May cause headache, nausea, fatigue,
and dizziness.
Inhalation:
Irritation may lead to chemical pneumonitis and pulmonary edema. May
cause severe irritation of the upper respiratory tract with pain,
burns, and inflammation. May cause effects similar to those described
for ingestion.
Chronic:
Prolonged or repeated skin contact may cause dermatitis. Prolonged
or repeated exposure may cause adverse reproductive effects.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Immediately flush skin with plenty of soap and
water for at least 15 minutes while removing contaminated clothing
and shoes. Wash clothing before reuse.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid.
Inhalation:
Get medical aid immediately. Remove from exposure to fresh air
immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen.
Notes to Physician:
Treat symptomatically and supportively. Persons with asthma, chronic
respiratory disease, skin disorders, eye problems or allergies may be
at increased risk from exposure to this substance.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use extinguishing media most appropriate for the surrounding fire.
Use water spray, dry chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up, then place into a suitable container for
disposal. Avoid generating dusty conditions. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use only in a well-ventilated area. Minimize dust
generation and accumulation. Avoid breathing dust, vapor, mist, or
gas. Avoid contact with eyes, skin, and clothing. Keep container
tightly closed. Avoid ingestion and inhalation.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances. Store
protected from moisture.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use process enclosure,
local exhaust ventilation, or other engineering controls to control
airborne levels.
Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29CFR
1910.134 or European Standard EN 149. Always use a
NIOSH or European Standard EN 149 approved respirator
when necessary.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Crystals
Appearance: white
Odor: none reported
pH: Not available.
Vapor Pressure: Negligible.
Viscosity: Not available.
Boiling Point: 606 deg C
Freezing/Melting Point: 264 deg C
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Soluble.
Specific Gravity/Density: 3.95 (water=1)
Molecular Formula: Cl2Sn
Molecular Weight: 189.596

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
High temperatures, incompatible materials, dust generation, moisture.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong bases, bromine trifluoride, ethylene
oxide, potassium, hydrogen peroxides, sodium, metal nitrates,
calcium acetylide, chlorine, moisture, calcium carbide, anhydrous
chlorides of iron, tin and aluminum., hydrazine hydrate, organic
nitrates, turpentine.
Hazardous Decomposition Products:
Hydrogen chloride, irritating and toxic fumes and gases, tin/tin
oxides.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 7772-99-8: XP8700000
LD50/LC50:
CAS# 7772-99-8: Oral, mouse: LD50 = 250 mg/kg; Oral, rabbit: LD50 =
10 gm/kg; Oral, rat: LD50 = 700 mg/kg.
Carcinogenicity:
Stannous chloride -
Not listed by ACGIH, IARC, NIOSH, NTP, or OSHA.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Ecotoxicity:
Water flea Daphnia: EC50 = 19.5; 48 Hr; UnspecifiedTerrestrial fate:
At a low pH, increased uptake of tin occurs as a result
of increase
solubility. The translocation of tin by plants is reduced by low

solubility in soil. The insolubility of tin at a neutral to
alkaline pH range prevents plant uptake and subsequent food chain
contamination.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: CORROSIVE SOLID, N.O.S.*
Hazard Class: 8
UN Number: 1759
Packing Group: III
IMO
Shipping Name: CORROSIVE SOLID, N.O.S.
Hazard Class: 8
UN Number: 1759
Packing Group: III
RID/ADR
Shipping Name: CORROSIVE SOLID, N.O.S.
Dangerous Goods Code: 8(65C)
UN Number: 1759

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
Risk Phrases:
R 22 Harmful if swallowed.
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
WGK (Water Danger/Protection)
CAS# 7772-99-8: 1
United Kingdom Occupational Exposure Limits

Canada
CAS# 7772-99-8 is listed on Canada's DSL List.
CAS# 7772-99-8 is listed on Canada's Ingredient Disclosure List.
Exposure Limits
CAS# 7772-99-8: OEL-AUSTRALIA:TWA 2 mg(Sn)/m3
OEL-BELGIUM:TWA 2 mg(Sn)/m3
OEL-DENMARK:TWA 2 mg(Sn)/m3
OEL-FINLAND:TWA 2 mg(Sn)/m3
OEL-GERMANY:TWA 2 mg(Sn)/m3
OEL-HUNGARY:TWA 1 mg(Sn)/m3;STEL 2 mg(Sn)/m3;Skin
OEL-THE NETHERLANDS:TWA 2 mg(Sn)/m3
OEL-THE PHILIPPINES:TWA 2 mg(Sn)/m3
OEL-SWITZERLAND:TWA 2 mg(Sn)/m3;STEL 4 mg(Sn)/m3
OEL-THAILAND:TWA 2 mg(Sn)/m3
OEL-UNITED KINGDOM:TWA 5 mg(Sn)/m3;STEL 10 mg(Sn)/m3
OEL IN BULGARIA, COLOMBIA, JORDAN, KOREA check ACGIH TLV
OEL IN NEW ZEALAND, SINGAPORE, VIETNAM check ACGI TLV
US FEDERAL
TSCA
CAS# 7772-99-8 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 6/24/1999 Revision #1 Date: 8/02/2000

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Sodium peroxide, p.a. 1313-60-6
(+)-(1S,2R)-2-Amino-1-Cyclopentanecarboxylic Acid 64191-14-6
1,2,3,4-Tetrahydroisoquinoline-3-carboxylic acid hydrochloride, 98% 35186-99-3
2-Amino-3-Chloro-5-Nitrobenzonitrile, 98% 20352-84-5
Sodium phosphate, dibasic heptahydrate, reagent ACS, crystals 7558-79-4
Adipic Acid Monomethyl Ester, 98% 627-91-8
4-Methyl-3-nitrophenol, 98% 2042-14-0
6-Fluoroindole, 98% 399-51-9
Potassium sodium tartrate tetrahydrate, p.a. 6381-59-5
Methylboronic acid, 97% 13061-96-6
Sodium Pyrophosphate Decahydrate, P.A. 13472-36-1
Dotriacontane, 99% (GC) 544-85-4
Salicylic Acid, Sodium Salt, P.A. 54-21-7
Sodium sulfate, powder, anhydrous, 99%, p.a. 7757-82-6
4-Chlorobenzyl Chloride, 99+% (GC) 104-83-6
Sodium Sulfite, Anhydrous, P.A. 7757-83-7
Sodium Thiocyanate, Reagent ACS (Crystals) 540-72-7
3-Tolylboronic acid, 97% 17933-03-8
4-Tolylboronic acid, 97% 5720-05-8
4-Chlorophenylboronic Acid, 97% 1679-18-1
3-Fluorophenylboronic Acid, 97% 768-35-4
Sodium Thiosulfate, Anhydrous 7772-98-7
4-Carboxyphenylboronic Acid, 97% 14047-29-1
3-Carboxyphenylboronic acid, 98% 25487-66-5
2-Carboxyphenylboronic acid, 97% 149105-19-1
2-Methoxyphenylboronic Acid, 97% 5720-06-9
Hexahydro-4-Methylphthalic Anhydride, 98% Mixture of Cis and Trans 19438-60-9
Sodium Thiosulfate Pentahydrate, P.A. 10102-17-7
Sodium Tripolyphosphate, Tech., 85% 7758-29-4
Sodium tungstate, dihydrate, reagent acs 10213-10-2
Biuret, 99% (TLC) 108-19-0
Tin(IV) Chloride, 99.999% 7646-78-8
Tin (II) Chloride, Anhydrous, 98% 7772-99-8
Tin (II) Oxide, 98+% 21651-19-4
Tin (II) Sulfate, 99% 7488-55-3
3-Nitrophenylboronic acid, 97% 13331-27-6
(2S,3R)-2-Amino-3-Hydroxy-4-Methylpentanoic Acid, 99+% e.e. 10148-71-7
4-(Methylthio)phenylboronic acid, 97% 98546-51-1
Starch, mais 9005-25-8
Styrene, P.A., Stabilized With 10-15 ppm p-Tert-Butylcatechol 100-42-5
3-Thiopheneboronic acid, 97% 6165-69-1
1,3-Dichloro-1,1,3,3-tetraisopropyldisiloxane, 96% (GC) 69304-37-6
2-Thiopheneboronic acid 6165-68-0
1-Naphthaleneboronic Acid, 97% 13922-41-3
n-Hexylboronic Acid 16343-08-1
Sucrose 57-50-1
Sulfamic Acid, 98+% 5329-14-6
Sulfanilamide, 98% 63-74-1
Ethyl 2-amino-1-cyclopentene-1-carboxylate 99%
Sulfanilic Acid, 99+% 121-57-3

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net