Search   
MSDS 
:
 3,3-Di(methylthio)-2-[3-(trifluoromethyl)benzoyl]acrylonitrile, 97+%
CAS 
:
 116492-97-8
SYNONYMS 
:
 
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 116492-97-8 |3,3-Di(methylthio)-2-[3-(trifluorometh| >97 | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XN C
Risk Phrases: 20/21/22 34 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Harmful by inhalation, in contact with skin and if swallowed. Causes
burns. Irritating to eyes, respiratory system and skin.Moisture
sensitive.

Potential Health Effects
Eye:
Causes eye irritation. Causes eye burns.
Skin:
Causes skin irritation. Harmful if absorbed through the skin. Causes
skin burns.
Ingestion:
Harmful if swallowed. May cause irritation of the digestive tract.
Causes gastrointestinal tract burns.
Inhalation:
Harmful if inhaled. Causes respiratory tract irritation. Causes
chemical burns to the respiratory tract.
Chronic:
Not available.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Immediately flush
eyes with plenty of water for at least 15 minutes, occasionally
lifting the upper and lower eyelids. Get medical aid. Get medical aid
immediately.
Skin:
Get medical aid. Get medical aid immediately. Flush skin with plenty
of water for at least 15 minutes while removing contaminated clothing
and shoes. Immediately flush skin with plenty of water for at least
15 minutes while removing contaminated clothing and shoes.
Ingestion:
Do not induce vomiting. Get medical aid. Get medical aid
immediately. Wash mouth out with water.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear.
Extinguishing Media:
Use foam, dry chemical, or carbon dioxide. Use water spray, dry
chemical, carbon dioxide, or chemical foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Avoid breathing dust, vapor, mist, or gas. Avoid contact with skin
and eyes. Do not breathe dust, vapor, mist, or gas. Do not get in
eyes, on skin, or on clothing. Use only in a chemical fume hood.
Storage:
Store in a cool, dry place. Store in a tightly closed container.
Corrosives area. Store under nitrogen.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 116492-97-8:


Personal Protective Equipment

Eyes:
Not available.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: yellow
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 60 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C15H17N3O2S
Molecular Weight: 317.34

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Not available.
Conditions to Avoid:
Incompatible materials, exposure to moist air or water.
Incompatibilities with Other Materials:
Strong oxidizing agents, bases, amines.
Hazardous Decomposition Products:
Hydrogen chloride, chlorine, hydrogen cyanide, nitrogen oxides,
carbon monoxide, oxides of sulfur, carbon dioxide, acrid smoke and
fumes.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 116492-97-8 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
3,3-Di(methylthio)-2-[3-(trifluoromethyl)benzoyl]acrylonitrile -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: NITRILES, SOLID, TOXIC, N.O.S.*
Hazard Class: 6.1
UN Number: 3276
Packing Group: III
IMO
Shipping Name: NITRILES, TOXIC, N.O.S.
Hazard Class: 6.1
UN Number: 3276
Packing Group: III
RID/ADR
Shipping Name: NITRILES, TOXIC, N.O.S.
Hazard Class: 6.1
UN Number: 3276
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN C
Risk Phrases:
R 20/21/22 Harmful by inhalation, in contact with
skin and if swallowed.
R 34 Causes burns.
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 36/37 Wear suitable protective clothing and
gloves.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 116492-97-8: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 116492-97-8 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 116492-97-8 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 4/04/2003 Revision #0 Date: Original.

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
4-Bromophenyl isothiocyanate 1985-12-2
3,3-Di(methylthio)-2-[3-(trifluoromethyl)benzoyl]acrylonitrile, 97+% 116492-97-8
Zinc chloride, 1.0M solution in diethyl ether 60-29-7
Zinc chloride, 0.5M solution in THF 109-99-9
Ethyl (r)-(+)-4-chloro-3-hydroxybutyrate 90866-33-4
5-Bromo-6-chloro-3-indoxyl butyrate 00-01-1
6-Chloro-3-indoxyl-beta-d-glucopyranoside 159954-28-6
2,6-Difluorobenzophenone, 97% 59189-51-4
Methyl 3-(2,2-dichlorovinyl)-2,2-dimethyl- 61898-95-1
L-7-Hydroxy-1,2,3,4-tetrahydroisoquinoline -3-carboxylic acid, 95% 128502-56-7
2-Formylfuran-5-boronic acid, tech., 90% 27329-70-0
Fullerenes, c60/c70 mixture 131159-39-2
Platinum Atom. Absorpt. Standard Solution 1 mg/ml Pt in 10% HCl 7440-06-4
2,5-Dimethylpyrrolidine, mixture of cis an d trans, 93.5% 3378-71-0
Ethyl acetate 141-78-6
Methyl 5-bromo-2-pyridinecarboxylate 29682-15-3
3-Phenyl-2-propyn-1-ol, 98% 1504-58-1
2-Chloro-3-fluorophenyl isocyanate 93110-05-5
Methyl 3-amino-4-methylbenzoate 18595-18-1
4-Chloro-3-nitrophenol 610-78-6
Sodium percarbonate 15630-89-4
tert-Butyl acrylate, stabilized 1663-39-4
Ammonia, 2m solution in methanol 67-56-1
Iodine monochloride, 1.0M solution in dichloromethane 75-09-2
Ethyl Acetoacetate 141-97-9
3-Azabicyclo??3.2.2??nonane, 99+% (gc) 283-24-9
Chlorosulfonylacetyl chloride 4025-77-8
??-alanine methyl ester hydrochloride 3196-73-4
Acetoxyacetyl chloride 13831-31-7
Zinc, 5% suspension in THF, highly active rieke?? metal 109-99-9
3-Chloro-4-hydroxytetrahydro-1h-1lambda~6~-thiophene-1,1-dione, 97% 49592-61-2
Benzyl 3-pyrroline-1-carboxylate 31970-04-4
Sodium, dry 7440-23-5
(2,5-Dimethoxyphenyl)acetyl chloride 52711-92-9
trans-2-Methyl-2-pentenoic acid 16957-70-3
4-Oxo-2,2,6,6-tetramethylpiperidinooxy, free radical 95% 2896-70-0
3-Fluorobenzyl bromide, 95% 456-41-7
2,3-Dichlorophenethylamine 34164-43-7
Brilliant Green (Cert) 633-03-4
5-Bromo-2,4-dichlororpyrimidine 36082-50-5
2-Methoxy-4-nitrobenzenesulfonyl chloride 21320-91-2
4-Bromo-2-chlorobenzenesulfonyl chloride 351003-52-6
1-Ethynyl-4-fluorobenzene 766-98-3
Ethyl Benzene 100-41-4
3,4-Difluorophenyl isocyanate 42601-04-7
3-Cyano-6,7-dimethylchromone 94978-86-6
p-Xylylenebis(triphenylphosphoniumchloride) 1519-47-7
2-Fluorothiophenol 2557-78-0
2-(1-Piperidino)aniline 39643-31-7
Trans-1,4-Cyclohexenediol, 99% 41513-32-0

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net