Search   
MSDS 
:
 Sodium, dry
CAS 
:
 7440-23-5
SYNONYMS 
:
 
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 7440-23-5 |Sodium | | 231-132-9 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: F C
Risk Phrases: 14/15 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Reacts violently with water liberating extremely flammable gases.
Causes burns.

Potential Health Effects
Eye:
Causes eye burns.
Skin:
Causes skin burns.
Ingestion:
Causes gastrointestinal tract burns.
Inhalation:
Causes chemical burns to the respiratory tract. Inhalation may be
fatal as a result of spasm, inflammation, edema of the larynx and
bronchi, chemical pneumonitis and pulmonary edema.
Chronic:
Not available.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes.
Ingestion:
Get medical aid immediately. Wash mouth out with water.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Reacts violently with water giving off flammable
gas which may explode. Reacts with water to form explosive hydrogen
gas. May re-ignite after fire is extinguished.
Extinguishing Media:
Do NOT use carbon dioxide. Use approved class D extinguishing agents
or smother with dry sand, clay, or sodium bicarbonate. DO NOT USE
WATER!

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Remove all sources of ignition.
Use a spark-proof tool. Spills may be neutralized with lime (calcium
oxide, CaO) or soda ash (sodium carbonate, Na2CO3).

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Use spark-proof tools and explosion proof equipment. Do not breathe
dust, vapor, mist, or gas. Do not get in eyes, on skin, or on
clothing. Use only in a chemical fume hood.
Storage:
Keep away from sources of ignition. Store in a cool, dry place.
Store in a tightly closed container. Water free area.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 7440-23-5:


Personal Protective Equipment

Eyes:
Not available.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: silver-gray
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: 0,684 cp @ 104 deg C
Boiling Point: 883 deg C
Freezing/Melting Point: 98 deg C
Autoignition Temperature: 115 deg C ( 239.00 deg F)
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: Reacts.
Specific Gravity/Density:
Molecular Formula: Na
Molecular Weight: 22.99

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable.
Conditions to Avoid:
Incompatible materials, exposure to moist air or water.
Incompatibilities with Other Materials:
Water, oxidizing agents, acids.
Hazardous Decomposition Products:
Hydrogen gas.
Hazardous Polymerization: Will not occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 7440-23-5: VY0686000
LD50/LC50:
Not available.
Carcinogenicity:
Sodium -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: SODIUM
(forbidden to ship via passenger air)
Hazard Class: 4.3
UN Number: 1428
Packing Group: I
IMO
Shipping Name: SODIUM
Hazard Class: 4.3
UN Number: 1428
Packing Group: I
RID/ADR
Shipping Name: SODIUM
Hazard Class: 4.3
UN Number: 1428
Packing group: I
USA RQ: CAS# 7440-23-5: 10 lb final RQ; 4.54 kg final RQ

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: F C
Risk Phrases:
R 14/15 Reacts violently with water liberating
extremely flammable gases.
R 34 Causes burns.
Safety Phrases:
S 6A Keep under nitrogen.
S 8 Keep container dry.
S 43D In case of fire, use sodium carbonate or dry
sand (never use water).
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 7440-23-5: 2
Canada
CAS# 7440-23-5 is listed on Canada's DSL List.
CAS# 7440-23-5 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 7440-23-5 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/20/2004 Revision #0 Date: Original.

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
4-Bromophenyl isothiocyanate 1985-12-2
3,3-Di(methylthio)-2-[3-(trifluoromethyl)benzoyl]acrylonitrile, 97+% 116492-97-8
Zinc chloride, 1.0M solution in diethyl ether 60-29-7
Zinc chloride, 0.5M solution in THF 109-99-9
Ethyl (r)-(+)-4-chloro-3-hydroxybutyrate 90866-33-4
5-Bromo-6-chloro-3-indoxyl butyrate 00-01-1
6-Chloro-3-indoxyl-beta-d-glucopyranoside 159954-28-6
2,6-Difluorobenzophenone, 97% 59189-51-4
Methyl 3-(2,2-dichlorovinyl)-2,2-dimethyl- 61898-95-1
L-7-Hydroxy-1,2,3,4-tetrahydroisoquinoline -3-carboxylic acid, 95% 128502-56-7
2-Formylfuran-5-boronic acid, tech., 90% 27329-70-0
Fullerenes, c60/c70 mixture 131159-39-2
Platinum Atom. Absorpt. Standard Solution 1 mg/ml Pt in 10% HCl 7440-06-4
2,5-Dimethylpyrrolidine, mixture of cis an d trans, 93.5% 3378-71-0
Ethyl acetate 141-78-6
Methyl 5-bromo-2-pyridinecarboxylate 29682-15-3
3-Phenyl-2-propyn-1-ol, 98% 1504-58-1
2-Chloro-3-fluorophenyl isocyanate 93110-05-5
Methyl 3-amino-4-methylbenzoate 18595-18-1
4-Chloro-3-nitrophenol 610-78-6
Sodium percarbonate 15630-89-4
tert-Butyl acrylate, stabilized 1663-39-4
Ammonia, 2m solution in methanol 67-56-1
Iodine monochloride, 1.0M solution in dichloromethane 75-09-2
Ethyl Acetoacetate 141-97-9
3-Azabicyclo??3.2.2??nonane, 99+% (gc) 283-24-9
Chlorosulfonylacetyl chloride 4025-77-8
??-alanine methyl ester hydrochloride 3196-73-4
Acetoxyacetyl chloride 13831-31-7
Zinc, 5% suspension in THF, highly active rieke?? metal 109-99-9
3-Chloro-4-hydroxytetrahydro-1h-1lambda~6~-thiophene-1,1-dione, 97% 49592-61-2
Benzyl 3-pyrroline-1-carboxylate 31970-04-4
Sodium, dry 7440-23-5
(2,5-Dimethoxyphenyl)acetyl chloride 52711-92-9
trans-2-Methyl-2-pentenoic acid 16957-70-3
4-Oxo-2,2,6,6-tetramethylpiperidinooxy, free radical 95% 2896-70-0
3-Fluorobenzyl bromide, 95% 456-41-7
2,3-Dichlorophenethylamine 34164-43-7
Brilliant Green (Cert) 633-03-4
5-Bromo-2,4-dichlororpyrimidine 36082-50-5
2-Methoxy-4-nitrobenzenesulfonyl chloride 21320-91-2
4-Bromo-2-chlorobenzenesulfonyl chloride 351003-52-6
1-Ethynyl-4-fluorobenzene 766-98-3
Ethyl Benzene 100-41-4
3,4-Difluorophenyl isocyanate 42601-04-7
3-Cyano-6,7-dimethylchromone 94978-86-6
p-Xylylenebis(triphenylphosphoniumchloride) 1519-47-7
2-Fluorothiophenol 2557-78-0
2-(1-Piperidino)aniline 39643-31-7
Trans-1,4-Cyclohexenediol, 99% 41513-32-0

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net