Search   
MSDS 
:
 Ammonia, 2m solution in methanol
CAS 
:
 67-56-1
SYNONYMS 
:
 
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
|----------------|--------------------------------------|----------|-----------|
| 67-56-1 |Methanol | 96% | 200-659-6 |
|----------------|--------------------------------------|----------|-----------|
| 7664-41-7 |Ammonia | 3.4% | 231-635-3 |
+----------------+--------------------------------------+----------+-----------+
Text for R-phrases: see Section 16
Hazard Symbols: T F
Risk Phrases: 11 23/24/25 39/23/24/25

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Highly flammable. Toxic by inhalation, in contact with skin and if
swallowed. Toxic : danger of very serious irreversible effects
through inhalation, in contact with skin and if swallowed.

Potential Health Effects
Eye:
Produces irritation, characterized by a burning sensation, redness,
tearing, inflammation, and possible corneal injury. May cause
painful sensitization to light.
Skin:
Causes moderate skin irritation. May be absorbed through the skin in
harmful amounts. Prolonged and/or repeated contact may cause
defatting of the skin and dermatitis.
Ingestion:
May be fatal or cause blindness if swallowed. Cannot be made
non-poisonous. May cause gastrointestinal irritation with nausea,
vomiting and diarrhea. May cause systemic toxicity with acidosis. May
cause central nervous system depression, characterized by excitement,
followed by headache, dizziness, drowsiness, and nausea. Advanced
stages may cause collapse, unconsciousness, coma and possible death
due to respiratory failure. May cause cardiopulmonary system
effects.
Inhalation:
May cause adverse central nervous system effects including headache,
convulsions, and possible death. May cause visual impairment and
possible permanent blindness. Causes irritation of mucous membrane.
Chronic:
Prolonged or repeated skin contact may cause dermatitis. Chronic
inhalation and ingestion may cause effects similar to those of acute
inhalation and ingestion. Chronic exposure may cause reproductive
disorders and teratogenic effects. Laboratory experiments have
resulted in mutagenic effects.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately. Induce vomiting by giving one teaspoon of Syrup of
Ipecac. Wash mouth out with water.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen.
Notes to Physician:
Effects may be delayed. Ethanol may inhibit methanol metabolism.
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
Containers can build up pressure if exposed to heat and/or fire. As
in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Water runoff can cause environmental damage. Dike
and collect water used to fight fire. Vapors can travel to a source
of ignition and flash back. During a fire, irritating and highly
toxic gases may be generated by thermal decomposition or combustion.
Flammable Liquid. Can release vapors that form explosive mixtures at
temperatures above the flashpoint. Water may be ineffective. Material
is lighter than water and a fire may be spread by the use of water.
Vapors may be heavier than air. They can spread along the ground and
collect in low or confined areas.
Extinguishing Media:
Use water spray to cool fire-exposed containers. Use foam, dry
chemical, or carbon dioxide. Use flooding quantities of water as
spray.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Remove all sources of ignition. Absorb spill using an absorbent,
non-combustible material such as earth, sand, or vermiculite. Do not
use combustible materials such as sawdust. Use a spark-proof tool.
Provide ventilation. Water spray may reduce vapor but may not prevent
ignition in closed spaces.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Ground and bond containers when
transferring material. Use spark-proof tools and explosion proof
equipment. Do not breathe dust, vapor, mist, or gas. Do not get in
eyes, on skin, or on clothing. Empty containers retain product
residue, (liquid and/or vapor), and can be dangerous. Keep away from
heat, sparks and flame. Do not ingest or inhale. Use only in a
chemical fume hood. Do not pressurize, cut, weld, braze, solder,
drill, grind, or expose empty containers to heat, sparks or open
flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Store in a cool, dry place. Store in a tightly closed
container. Flammables-area.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate general or
local explosion-proof ventilation to keep airborne levels to
acceptable levels.
Exposure Limits
CAS# 67-56-1:
United Kingdom, WEL - TWA: 200 ppm TWA; 266 mg/m3 TWA
United Kingdom, WEL - STEL: 250 ppm STEL; 333 mg/m3 STEL
United States OSHA: 200 ppm TWA; 260 mg/m3 TWA
Belgium - TWA: 200 ppm VLE; 266 mg/m3 VLE
Belgium - STEL: 250 ppm VLE; 333 mg/m3 VLE
France - VME: 200 ppm VME; 260 mg/m3 VME
France - VLE: 1000 ppm VLE; 1300 mg/m3 VLE
Germany: 200 ppm TWA; 270 mg/m3 TWA
Germany: Skin absorber
Japan: 200 ppm OEL; 260 mg/m3 OEL
Malaysia: 200 ppm TWA; 262 mg/m3 TWA
Netherlands: 200 ppm MAC; 260 mg/m3 MAC
Russia: 5 mg/m3 TWA
Spain: 200 ppm VLA-ED; 266 mg/m3 VLA-ED
Spain: 250 ppm VLA-EC; 333 mg/m3 VLA-EC
CAS# 7664-41-7:
United Kingdom, WEL - TWA: 25 ppm TWA (anhydrous); 18 mg/m3 TWA
(anhydrous)
United Kingdom, WEL - STEL: 35 ppm STEL (anhydrous); 25 mg/m3 STE
(anhydrous)
United States OSHA: 50 ppm TWA; 35 mg/m3 TWA
Belgium - TWA: 20 ppm VLE; 14 mg/m3 VLE
Belgium - STEL: 50 ppm VLE; 36 mg/m3 VLE
France - VME: 25 ppm VME; 18 mg/m3 VME
France - VLE: 50 ppm VLE; 36 mg/m3 VLE
Germany: 50 ppm TWA; 35 mg/m3 TWA
Japan: 25 ppm OEL; 17 mg/m3 OEL
Malaysia: 25 ppm TWA; 17 mg/m3 TWA
Netherlands: 50 ppm STEL; 36 mg/m3 STEL
Netherlands: 20 ppm MAC; 14 mg/m3 MAC
Russia: 20 mg/m3 TWA
Spain: 20 ppm VLA-ED; 14 mg/m3 VLA-ED
Spain: 50 ppm VLA-EC; 36 mg/m3 VLA-EC

Personal Protective Equipment

Eyes:
Not available.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: colorless
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: 11 deg C ( 51.80 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: Soluble.
Specific Gravity/Density: 1.023
Molecular Formula: H3N
Molecular Weight: 17.03

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable.
Conditions to Avoid:
Incompatible materials, ignition sources, exposure to moist air or
water.
Incompatibilities with Other Materials:
Oxidizing agents, reducing agents, acids, acid chlorides, alkali
metals, magnesium, potassium, sodium, metals as powders (e.g.
hafnium, raney nickel), acid anhydrides.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 67-56-1: PC1400000
CAS# 7664-41-7: BO0875000
LD50/LC50:
CAS# 67-56-1: Draize test, rabbit, eye: 40 mg Moderate; Draize test,
rabbit, eye: 100 mg/24H Moderate; Draize test, rabbit, skin: 20
mg/24H Moderate; Inhalation, rabbit: LC50 = 81000 mg/m3/14H;
Inhalation, rat: LC50 = 64000 ppm/4H; Oral, mouse: LD50 = 7300
mg/kg; Oral, rabbit: LD50 = 14200 mg/kg; Oral, rat: LD50 = 5600
mg/kg; Skin, rabbit: LD50 = 15800 mg/kg.
CAS# 7664-41-7: Inhalation, mouse: LC50 = 4230 ppm/1H; Inhalation,
mouse: LC50 = 4600 mg/m3/2H; Inhalation, rabbit: LC50 = 7 gm/m3/1H;
Inhalation, rat: LC50 = 2000 ppm/4H; Inhalation, rat: LC50 = 18600
mg/m3/5M; Inhalation, rat: LC50 = 7040 mg/m3/30M; Skin, rat: LD50 =
112000 mg/m3/15M; Skin, rat: LD50 = 71900 mg/m3/30M; Skin, rat: LD50
= 4840 mg/m3/60M.
Carcinogenicity:
Methanol -
Not listed by ACGIH, IARC, or NTP.
Ammonia -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Other
No information available.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: METHANOL, SOLUTION
Hazard Class: 3 (6.1)
UN Number: 1230
Packing Group: II
IMO
Shipping Name: METHANOL, SOLUTION
Hazard Class: 3 (6.1)
UN Number: 1230
Packing Group: II
RID/ADR
Shipping Name: METHANOL, SOLUTION
Hazard Class: 3
UN Number: 1230
Packing group: II
USA RQ: CAS# 67-56-1: 5000 lb final RQ; 2270 kg final RQ
USA RQ: CAS# 7664-41-7: 100 lb final RQ; 45.4 kg final RQ

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: T F
Risk Phrases:
R 11 Highly flammable.
R 23/24/25 Toxic by inhalation, in contact with skin
and if swallowed.
R 39/23/24/25 Toxic : danger of very serious
irreversible effects through inhalation, in contact
with skin and if swallowed.
Safety Phrases:
S 7 Keep container tightly closed.
S 16 Keep away from sources of ignition - No
smoking.
S 36/37 Wear suitable protective clothing and
gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
S 61 Avoid release to the environment. Refer to
special instructions/safety data sheets.
WGK (Water Danger/Protection)
CAS# 67-56-1: 1
CAS# 7664-41-7: 2
Canada
CAS# 67-56-1 is listed on Canada's DSL List.
CAS# 7664-41-7 is listed on Canada's DSL List.
CAS# 67-56-1 is listed on Canada's Ingredient Disclosure List.
CAS# 7664-41-7 is listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 67-56-1 is listed on the TSCA inventory.
CAS# 7664-41-7 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

Text for R-phrases from Section 2
R 11 Highly flammable.
R 23/24/25 Toxic by inhalation, in contact with skin and
if swallowed.
R 39/23/24/25 Toxic : danger of very serious irreversible
effects through inhalation, in contact with skin and if swallowed.
MSDS Creation Date: 6/10/2003 Revision #0 Date: Original.

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
4-Bromophenyl isothiocyanate 1985-12-2
3,3-Di(methylthio)-2-[3-(trifluoromethyl)benzoyl]acrylonitrile, 97+% 116492-97-8
Zinc chloride, 1.0M solution in diethyl ether 60-29-7
Zinc chloride, 0.5M solution in THF 109-99-9
Ethyl (r)-(+)-4-chloro-3-hydroxybutyrate 90866-33-4
5-Bromo-6-chloro-3-indoxyl butyrate 00-01-1
6-Chloro-3-indoxyl-beta-d-glucopyranoside 159954-28-6
2,6-Difluorobenzophenone, 97% 59189-51-4
Methyl 3-(2,2-dichlorovinyl)-2,2-dimethyl- 61898-95-1
L-7-Hydroxy-1,2,3,4-tetrahydroisoquinoline -3-carboxylic acid, 95% 128502-56-7
2-Formylfuran-5-boronic acid, tech., 90% 27329-70-0
Fullerenes, c60/c70 mixture 131159-39-2
Platinum Atom. Absorpt. Standard Solution 1 mg/ml Pt in 10% HCl 7440-06-4
2,5-Dimethylpyrrolidine, mixture of cis an d trans, 93.5% 3378-71-0
Ethyl acetate 141-78-6
Methyl 5-bromo-2-pyridinecarboxylate 29682-15-3
3-Phenyl-2-propyn-1-ol, 98% 1504-58-1
2-Chloro-3-fluorophenyl isocyanate 93110-05-5
Methyl 3-amino-4-methylbenzoate 18595-18-1
4-Chloro-3-nitrophenol 610-78-6
Sodium percarbonate 15630-89-4
tert-Butyl acrylate, stabilized 1663-39-4
Ammonia, 2m solution in methanol 67-56-1
Iodine monochloride, 1.0M solution in dichloromethane 75-09-2
Ethyl Acetoacetate 141-97-9
3-Azabicyclo??3.2.2??nonane, 99+% (gc) 283-24-9
Chlorosulfonylacetyl chloride 4025-77-8
??-alanine methyl ester hydrochloride 3196-73-4
Acetoxyacetyl chloride 13831-31-7
Zinc, 5% suspension in THF, highly active rieke?? metal 109-99-9
3-Chloro-4-hydroxytetrahydro-1h-1lambda~6~-thiophene-1,1-dione, 97% 49592-61-2
Benzyl 3-pyrroline-1-carboxylate 31970-04-4
Sodium, dry 7440-23-5
(2,5-Dimethoxyphenyl)acetyl chloride 52711-92-9
trans-2-Methyl-2-pentenoic acid 16957-70-3
4-Oxo-2,2,6,6-tetramethylpiperidinooxy, free radical 95% 2896-70-0
3-Fluorobenzyl bromide, 95% 456-41-7
2,3-Dichlorophenethylamine 34164-43-7
Brilliant Green (Cert) 633-03-4
5-Bromo-2,4-dichlororpyrimidine 36082-50-5
2-Methoxy-4-nitrobenzenesulfonyl chloride 21320-91-2
4-Bromo-2-chlorobenzenesulfonyl chloride 351003-52-6
1-Ethynyl-4-fluorobenzene 766-98-3
Ethyl Benzene 100-41-4
3,4-Difluorophenyl isocyanate 42601-04-7
3-Cyano-6,7-dimethylchromone 94978-86-6
p-Xylylenebis(triphenylphosphoniumchloride) 1519-47-7
2-Fluorothiophenol 2557-78-0
2-(1-Piperidino)aniline 39643-31-7
Trans-1,4-Cyclohexenediol, 99% 41513-32-0

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net