Search   
MSDS 
:
 3-Phenyl-2-propyn-1-ol, 98%
CAS 
:
 1504-58-1
SYNONYMS 
:
 None Known.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 1504-58-1 |3-Phenyl-2-propyn-1-ol | 98% | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes and skin.

Potential Health Effects
Eye:
Causes eye irritation. May cause chemical conjunctivitis.
Skin:
Causes skin irritation. May be harmful if absorbed through the skin.
Ingestion:
May cause irritation of the digestive tract. May be harmful if
swallowed.
Inhalation:
May cause respiratory tract irritation. May be harmful if inhaled.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water. Wash mouth out with water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid. Do NOT use mouth-to-mouth
resuscitation.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Vapors may
be heavier than air. They can spread along the ground and collect
in low or confined areas. Runoff from fire control or dilution water
may cause pollution.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or chemical foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Provide
ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Avoid breathing dust, vapor, mist, or gas. Avoid contact with eyes,
skin, and clothing. Keep container tightly closed. Avoid ingestion
and inhalation. Use with adequate ventilation. Wash clothing before
reuse.
Storage:
Store in a cool, dry place. Store in a tightly closed container.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 1504-58-1:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Clear liquid
Color: colorless to light yellow
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 129 -130 deg C @10mmHg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: > 110 deg C (> 230.00 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: 1.078
Molecular Formula: C9H8O
Molecular Weight: 132.16

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Not currently available.
Conditions to Avoid:
Excess heat.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 1504-58-1 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
3-Phenyl-2-propyn-1-ol -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
IMO
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
RID/ADR
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing group:

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/38 Irritating to eyes and skin.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 37/39 Wear suitable gloves and eye/face
protection.
WGK (Water Danger/Protection)
CAS# 1504-58-1: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 1504-58-1 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 1504-58-1 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 6/10/2003 Revision #1 Date: 8/13/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
4-Bromophenyl isothiocyanate 1985-12-2
3,3-Di(methylthio)-2-[3-(trifluoromethyl)benzoyl]acrylonitrile, 97+% 116492-97-8
Zinc chloride, 1.0M solution in diethyl ether 60-29-7
Zinc chloride, 0.5M solution in THF 109-99-9
Ethyl (r)-(+)-4-chloro-3-hydroxybutyrate 90866-33-4
5-Bromo-6-chloro-3-indoxyl butyrate 00-01-1
6-Chloro-3-indoxyl-beta-d-glucopyranoside 159954-28-6
2,6-Difluorobenzophenone, 97% 59189-51-4
Methyl 3-(2,2-dichlorovinyl)-2,2-dimethyl- 61898-95-1
L-7-Hydroxy-1,2,3,4-tetrahydroisoquinoline -3-carboxylic acid, 95% 128502-56-7
2-Formylfuran-5-boronic acid, tech., 90% 27329-70-0
Fullerenes, c60/c70 mixture 131159-39-2
Platinum Atom. Absorpt. Standard Solution 1 mg/ml Pt in 10% HCl 7440-06-4
2,5-Dimethylpyrrolidine, mixture of cis an d trans, 93.5% 3378-71-0
Ethyl acetate 141-78-6
Methyl 5-bromo-2-pyridinecarboxylate 29682-15-3
3-Phenyl-2-propyn-1-ol, 98% 1504-58-1
2-Chloro-3-fluorophenyl isocyanate 93110-05-5
Methyl 3-amino-4-methylbenzoate 18595-18-1
4-Chloro-3-nitrophenol 610-78-6
Sodium percarbonate 15630-89-4
tert-Butyl acrylate, stabilized 1663-39-4
Ammonia, 2m solution in methanol 67-56-1
Iodine monochloride, 1.0M solution in dichloromethane 75-09-2
Ethyl Acetoacetate 141-97-9
3-Azabicyclo??3.2.2??nonane, 99+% (gc) 283-24-9
Chlorosulfonylacetyl chloride 4025-77-8
??-alanine methyl ester hydrochloride 3196-73-4
Acetoxyacetyl chloride 13831-31-7
Zinc, 5% suspension in THF, highly active rieke?? metal 109-99-9
3-Chloro-4-hydroxytetrahydro-1h-1lambda~6~-thiophene-1,1-dione, 97% 49592-61-2
Benzyl 3-pyrroline-1-carboxylate 31970-04-4
Sodium, dry 7440-23-5
(2,5-Dimethoxyphenyl)acetyl chloride 52711-92-9
trans-2-Methyl-2-pentenoic acid 16957-70-3
4-Oxo-2,2,6,6-tetramethylpiperidinooxy, free radical 95% 2896-70-0
3-Fluorobenzyl bromide, 95% 456-41-7
2,3-Dichlorophenethylamine 34164-43-7
Brilliant Green (Cert) 633-03-4
5-Bromo-2,4-dichlororpyrimidine 36082-50-5
2-Methoxy-4-nitrobenzenesulfonyl chloride 21320-91-2
4-Bromo-2-chlorobenzenesulfonyl chloride 351003-52-6
1-Ethynyl-4-fluorobenzene 766-98-3
Ethyl Benzene 100-41-4
3,4-Difluorophenyl isocyanate 42601-04-7
3-Cyano-6,7-dimethylchromone 94978-86-6
p-Xylylenebis(triphenylphosphoniumchloride) 1519-47-7
2-Fluorothiophenol 2557-78-0
2-(1-Piperidino)aniline 39643-31-7
Trans-1,4-Cyclohexenediol, 99% 41513-32-0

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net