Search   
MSDS 
:
 2-Methoxy-4-nitrobenzenesulfonyl chloride
CAS 
:
 21320-91-2
SYNONYMS 
:
 None Known.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 21320-91-2 |2-Methoxy-4-nitrobenzenesulfonyl chlor| ca. 100 | unlisted |
| |ide | | |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Causes burns.Water-reactive.

Potential Health Effects
Eye:
Causes eye burns.
Skin:
Causes skin burns.
Ingestion:
Causes gastrointestinal tract burns.
Inhalation:
Causes chemical burns to the respiratory tract. Inhalation may be
fatal as a result of spasm, inflammation, edema of the larynx and
bronchi, chemical pneumonitis and pulmonary edema. May cause burning
sensation, coughing, wheezing, laryngitis, shortness of breath,
headache, nausea, and vomiting.
Chronic:
Chronic exposure may cause effects similar to those of acute
exposure.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately. Do NOT allow victim to rub eyes or keep eyes closed.
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes. If water-reactive products are embedded in the skin, no
water should be applied. The embedded products should be covered
with a light oil.
Ingestion:
Get medical aid immediately. Do NOT induce vomiting. If conscious
and alert, rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If breathing is difficult, give oxygen. Do NOT use
mouth-to-mouth resuscitation. If breathing has ceased apply
artificial respiration using oxygen and a suitable mechanical device
such as a bag and a mask.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Water
Reactive. Material will react with water and may release a flammable
and/or toxic gas.
Extinguishing Media:
Use dry sand or earth to smother fire. DO NOT USE WATER! Do NOT get
water inside containers. Contact professional fire-fighters
immediately.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Avoid generating dusty conditions. Cover with
sand, dry lime or soda ash and place in a closed container for
disposal. Provide ventilation. Do not expose spill to water. Do not
get water inside containers.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Minimize dust generation and accumulation. Do not breathe dust,
vapor, mist, or gas. Do not get in eyes, on skin, or on clothing.
Keep container tightly closed. Do not ingest or inhale. Do not allow
contact with water. Use only in a chemical fume hood. Discard
contaminated shoes. Keep from contact with moist air and steam.
Storage:
Store in a cool, dry place. Store in a tightly closed container.
Keep away from water. Corrosives area.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use explosion-proof ventilation equipment. Facilities storing or
utilizing this material should be equipped with an eyewash facility
and a safety shower.
Exposure Limits
CAS# 21320-91-2:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: Not available.
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 90 - 95 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C7H6ClNO5S
Molecular Weight: 251.65

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures. Reacts with water to
form hydrogen chloride, a toxic and corrosive gas.
Conditions to Avoid:
Dust generation, exposure to moist air or water.
Incompatibilities with Other Materials:
Strong bases, strong oxidizing agents.
Hazardous Decomposition Products:
Hydrogen chloride, carbon monoxide, oxides of nitrogen, oxides of
sulfur, carbon dioxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 21320-91-2 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
2-Methoxy-4-nitrobenzenesulfonyl chloride -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Ecotoxicity:
Fish: Pseudomonas putida:

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
No information available.
IMO
No information available.
RID/ADR
No information available.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 21320-91-2: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 21320-91-2 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 21320-91-2 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 6/10/2003 Revision #3 Date: 9/11/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
4-Bromophenyl isothiocyanate 1985-12-2
3,3-Di(methylthio)-2-[3-(trifluoromethyl)benzoyl]acrylonitrile, 97+% 116492-97-8
Zinc chloride, 1.0M solution in diethyl ether 60-29-7
Zinc chloride, 0.5M solution in THF 109-99-9
Ethyl (r)-(+)-4-chloro-3-hydroxybutyrate 90866-33-4
5-Bromo-6-chloro-3-indoxyl butyrate 00-01-1
6-Chloro-3-indoxyl-beta-d-glucopyranoside 159954-28-6
2,6-Difluorobenzophenone, 97% 59189-51-4
Methyl 3-(2,2-dichlorovinyl)-2,2-dimethyl- 61898-95-1
L-7-Hydroxy-1,2,3,4-tetrahydroisoquinoline -3-carboxylic acid, 95% 128502-56-7
2-Formylfuran-5-boronic acid, tech., 90% 27329-70-0
Fullerenes, c60/c70 mixture 131159-39-2
Platinum Atom. Absorpt. Standard Solution 1 mg/ml Pt in 10% HCl 7440-06-4
2,5-Dimethylpyrrolidine, mixture of cis an d trans, 93.5% 3378-71-0
Ethyl acetate 141-78-6
Methyl 5-bromo-2-pyridinecarboxylate 29682-15-3
3-Phenyl-2-propyn-1-ol, 98% 1504-58-1
2-Chloro-3-fluorophenyl isocyanate 93110-05-5
Methyl 3-amino-4-methylbenzoate 18595-18-1
4-Chloro-3-nitrophenol 610-78-6
Sodium percarbonate 15630-89-4
tert-Butyl acrylate, stabilized 1663-39-4
Ammonia, 2m solution in methanol 67-56-1
Iodine monochloride, 1.0M solution in dichloromethane 75-09-2
Ethyl Acetoacetate 141-97-9
3-Azabicyclo??3.2.2??nonane, 99+% (gc) 283-24-9
Chlorosulfonylacetyl chloride 4025-77-8
??-alanine methyl ester hydrochloride 3196-73-4
Acetoxyacetyl chloride 13831-31-7
Zinc, 5% suspension in THF, highly active rieke?? metal 109-99-9
3-Chloro-4-hydroxytetrahydro-1h-1lambda~6~-thiophene-1,1-dione, 97% 49592-61-2
Benzyl 3-pyrroline-1-carboxylate 31970-04-4
Sodium, dry 7440-23-5
(2,5-Dimethoxyphenyl)acetyl chloride 52711-92-9
trans-2-Methyl-2-pentenoic acid 16957-70-3
4-Oxo-2,2,6,6-tetramethylpiperidinooxy, free radical 95% 2896-70-0
3-Fluorobenzyl bromide, 95% 456-41-7
2,3-Dichlorophenethylamine 34164-43-7
Brilliant Green (Cert) 633-03-4
5-Bromo-2,4-dichlororpyrimidine 36082-50-5
2-Methoxy-4-nitrobenzenesulfonyl chloride 21320-91-2
4-Bromo-2-chlorobenzenesulfonyl chloride 351003-52-6
1-Ethynyl-4-fluorobenzene 766-98-3
Ethyl Benzene 100-41-4
3,4-Difluorophenyl isocyanate 42601-04-7
3-Cyano-6,7-dimethylchromone 94978-86-6
p-Xylylenebis(triphenylphosphoniumchloride) 1519-47-7
2-Fluorothiophenol 2557-78-0
2-(1-Piperidino)aniline 39643-31-7
Trans-1,4-Cyclohexenediol, 99% 41513-32-0

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net