Search   
MSDS 
:
 Molybdocene Dichloride
CAS 
:
 12184-22-4
SYNONYMS 
:
 Bis(Cyclopentadienyl)molybdenum Dichloride.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 12184-22-4 |Molybdocene Dichloride | ca 100 | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.The toxicological
properties of this material have not been fully investigated.Air
sensitive.Moisture sensitive.

Potential Health Effects
Eye:
Causes eye irritation. May cause chemical conjunctivitis.
Skin:
Causes skin irritation.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. The toxicological properties of this substance have not
been fully investigated.
Inhalation:
Causes respiratory tract irritation. The toxicological properties of
this substance have not been fully investigated. Can produce delayed
pulmonary edema.
Chronic:
Effects may be delayed.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Get medical aid. Do NOT induce vomiting. If conscious and alert,
rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use agent most appropriate to extinguish fire. Do NOT get water
inside containers. Use water spray, dry chemical, carbon dioxide, or
appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Clean up spills immediately, observing precautions in the
Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation. Place under an inert atmosphere. Do not get
water inside containers.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Minimize dust
generation and accumulation. Avoid contact with eyes, skin, and
clothing. Keep container tightly closed. Avoid ingestion and
inhalation. Handle under an inert atmosphere. Store protected from
air. Do not allow contact with water. Keep from contact with moist
air and steam.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances. Do not expose
to air. Store protected from moisture. Store under an inert
atmosphere.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 12184-22-4:
United States OSHA: 15 mg/m3 TWA (total dust) (listed under
Molybdenum).
Malaysia: (listed as molybdenum): 10 mg/m3 TWA
Netherlands: (listed as molybdenum): 5 mg/m3 MAC
Russia: (listed as molybdenum): 3 mg/m3 TWA
Russia: (listed as molybdenum): 0.5 mg/m3 STEL

Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Crystals
Color: black - brown - gray powder
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C10H10Cl2Mo
Molecular Weight: 297.02

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Incompatible materials, dust generation, moisture, exposure to air,
excess heat, strong oxidants.
Incompatibilities with Other Materials:
Air, moisture, strong oxidizing agents.
Hazardous Decomposition Products:
Hydrogen chloride, carbon monoxide, irritating and toxic fumes and
gases, carbon dioxide, oxides of chlorine.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 12184-22-4 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Molybdocene Dichloride -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 28A After contact with skin, wash immediately with
plenty of water.
S 37 Wear suitable gloves.
S 37/39 Wear suitable gloves and eye/face
protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 12184-22-4: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 12184-22-4 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 12184-22-4 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 7/28/1999 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Neodymium chloride hexahydrate, 99.99% 13477-89-9
4-Methylbenzophenone, 97% 134-84-9
4-Biphenylcarbonyl chloride, 98% 14002-51-8
1,4-Dicyanobenzene, 98% 623-26-7
2-Iodophenol 533-58-4
d-alpha-Tocopheryl acid succinate, 99+% (gc) 4345-03-3
2-Cyclopentylidenecyclopentanone, 97% 825-25-2
1,4-Dichloro-2-Iodobenzene, 98% 29682-41-5
6-P-Toluidine-2-Naphthalenesulfonic Acid, 99% (Titr.) 7724-15-4
N,N'-Diethyl-2-Butene-1,4-Diamine, 97% 112-21-0
1-Amino-5,6,7,8-tetrahydronaphthalene, tech., 90% 2217-41-6
N-Ethylbenzylamine, 97% 14321-27-8
Allyl phenoxyacetate, 98+% 7493-74-5
3-Nitrostyrene, 97% 586-39-0
Ruthenium on alumina powder (5% ru)
Nipecotamide, 95% 4138-26-5
8-Hydroxy-7-(6-Sulfo-2-Naphthylazo)-5-Quinolinesulfonic Acid Disodium 56932-43-5
Molybdocene Dichloride 12184-22-4
1,2,3,5-Tetramethylbenzene, Tech., 85+% 527-53-7
Androsterone, 97% 53-41-8
1,3-Dimethyl-5-aminoadamantane hydrochloride 19982-08-2
4-Methoxyphenylhydrazine hydrochloride 98% 19501-58-7
2,4,6-Trichloropyrimidine, 99% 3764-01-0
1-Bromo-3-phenylpropane, 98% 637-59-2
Aluminum Tert-Butoxide, 98% (Grav.) 556-91-2
4-Aminothiophenol,96% 1193-02-8
1,2-Dimethyl-3-Hydroxy-4-Pyridone, 99+% 30652-11-0
1,1,1-Tris-(Hydroxymethyl)-Ethane, 97% 77-85-0
4-Benzoylpyridine, 98% 14548-46-0
tert-Butylchlorodiphenylsilane, 98% 58479-61-1
4,4'-Azodianiline, 95% (Titr.) 538-41-0
2-Methyl-5-nitroaniline, 99% 99-55-8
(s)-(-)-1-Benzylglycerol, 98% 17325-85-8
Maleimide, 98% 541-59-3
2-Chlorobenzoxazole, 99% (GC) 615-18-9
Methyl Thiocyanate, 99% 556-64-9
Alpha, 4-Dichloroanisole, 97% 21151-56-4
Lanthanum hexaboride, 99% 12008-21-8
Dl-methyl mandelate, 97% 4358-87-6
(5-z)-9-deoxy-6,9alpha-epoxy-PGF1alpha, sodium salt, 98%, stab. with 61849-14-7
(-)-2-Cyano-6-Phenyloxazolopiperidine, 99+% 88056-92-2
3,4-Dichloroaniline, 98% 95-76-1
Indole, 99+% 120-72-9
3-Methylbenzophenone, 99% 643-65-2
3-Hydroxy-6-Methyl-2-Nitropyridine, 99% 15128-90-2
1,1,3,3-Tetramethyl-2-thiourea, 98% 2782-91-4
1,2-Bis(2-aminophenoxy)-ethane-N,N,N', N'-tetraacetic acid 126824-24-6
6-Amino-5-nitroso-2-thiouracil, 99% 1672-48-6
N,N-Diethylaniline, 99% 91-66-7
Tetraethylammonium tetrafluoroborate, 99% 429-06-1

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net