Search   
MSDS 
:
 4-Methylbenzophenone, 97%
CAS 
:
 134-84-9
SYNONYMS 
:
 Phenyl 4-tolyl ketone; (4-Methylphenyl)phenylmethanone
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 134-84-9 |4-Methylbenzophenone, 97% | 97% | 205-159-1 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully
investigated.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
The toxicological properties of this substance have not been fully
investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid immediately. Flush skin with plenty of water for at
least 15 minutes while removing contaminated clothing and shoes.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear.
Extinguishing Media:
Use foam, dry chemical, or carbon dioxide.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation. Avoid
contact with skin and eyes. Avoid ingestion and inhalation.
Storage:
Store in a cool, dry place. Store in a tightly closed container.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use process enclosure,
local exhaust ventilation, or other engineering controls to control
airborne levels.
Exposure Limits
CAS# 134-84-9:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: light yellow
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 326 deg C @ 760.00mm Hg
Freezing/Melting Point: 56.5 - 57 deg C
Autoignition Temperature: Not available.
Flash Point: 143 deg C ( 289.40 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: insoluble
Specific Gravity/Density:
Molecular Formula: C14H12O
Molecular Weight: 196.25

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
None reported.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 134-84-9: DJ1750000
LD50/LC50:
Not available.
Carcinogenicity:
4-Methylbenzophenone, 97% -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 134-84-9: No information available.
Canada
CAS# 134-84-9 is listed on Canada's DSL List.
CAS# 134-84-9 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 134-84-9 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Neodymium chloride hexahydrate, 99.99% 13477-89-9
4-Methylbenzophenone, 97% 134-84-9
4-Biphenylcarbonyl chloride, 98% 14002-51-8
1,4-Dicyanobenzene, 98% 623-26-7
2-Iodophenol 533-58-4
d-alpha-Tocopheryl acid succinate, 99+% (gc) 4345-03-3
2-Cyclopentylidenecyclopentanone, 97% 825-25-2
1,4-Dichloro-2-Iodobenzene, 98% 29682-41-5
6-P-Toluidine-2-Naphthalenesulfonic Acid, 99% (Titr.) 7724-15-4
N,N'-Diethyl-2-Butene-1,4-Diamine, 97% 112-21-0
1-Amino-5,6,7,8-tetrahydronaphthalene, tech., 90% 2217-41-6
N-Ethylbenzylamine, 97% 14321-27-8
Allyl phenoxyacetate, 98+% 7493-74-5
3-Nitrostyrene, 97% 586-39-0
Ruthenium on alumina powder (5% ru)
Nipecotamide, 95% 4138-26-5
8-Hydroxy-7-(6-Sulfo-2-Naphthylazo)-5-Quinolinesulfonic Acid Disodium 56932-43-5
Molybdocene Dichloride 12184-22-4
1,2,3,5-Tetramethylbenzene, Tech., 85+% 527-53-7
Androsterone, 97% 53-41-8
1,3-Dimethyl-5-aminoadamantane hydrochloride 19982-08-2
4-Methoxyphenylhydrazine hydrochloride 98% 19501-58-7
2,4,6-Trichloropyrimidine, 99% 3764-01-0
1-Bromo-3-phenylpropane, 98% 637-59-2
Aluminum Tert-Butoxide, 98% (Grav.) 556-91-2
4-Aminothiophenol,96% 1193-02-8
1,2-Dimethyl-3-Hydroxy-4-Pyridone, 99+% 30652-11-0
1,1,1-Tris-(Hydroxymethyl)-Ethane, 97% 77-85-0
4-Benzoylpyridine, 98% 14548-46-0
tert-Butylchlorodiphenylsilane, 98% 58479-61-1
4,4'-Azodianiline, 95% (Titr.) 538-41-0
2-Methyl-5-nitroaniline, 99% 99-55-8
(s)-(-)-1-Benzylglycerol, 98% 17325-85-8
Maleimide, 98% 541-59-3
2-Chlorobenzoxazole, 99% (GC) 615-18-9
Methyl Thiocyanate, 99% 556-64-9
Alpha, 4-Dichloroanisole, 97% 21151-56-4
Lanthanum hexaboride, 99% 12008-21-8
Dl-methyl mandelate, 97% 4358-87-6
(5-z)-9-deoxy-6,9alpha-epoxy-PGF1alpha, sodium salt, 98%, stab. with 61849-14-7
(-)-2-Cyano-6-Phenyloxazolopiperidine, 99+% 88056-92-2
3,4-Dichloroaniline, 98% 95-76-1
Indole, 99+% 120-72-9
3-Methylbenzophenone, 99% 643-65-2
3-Hydroxy-6-Methyl-2-Nitropyridine, 99% 15128-90-2
1,1,3,3-Tetramethyl-2-thiourea, 98% 2782-91-4
1,2-Bis(2-aminophenoxy)-ethane-N,N,N', N'-tetraacetic acid 126824-24-6
6-Amino-5-nitroso-2-thiouracil, 99% 1672-48-6
N,N-Diethylaniline, 99% 91-66-7
Tetraethylammonium tetrafluoroborate, 99% 429-06-1

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net