Search   
MSDS 
:
 4-Biphenylcarbonyl chloride, 98%
CAS 
:
 14002-51-8
SYNONYMS 
:
 4-Phenylbenzoyl chloride
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 14002-51-8 |4-Biphenylcarbonyl chloride, 98% | 98% | 237-804-8 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Causes burns.Corrosive.Moisture sensitive.

Potential Health Effects
Eye:
Causes eye burns.
Skin:
Causes skin burns.
Ingestion:
Causes gastrointestinal tract burns.
Inhalation:
May cause irritation of the respiratory tract with burning pain in
the nose and throat, coughing, wheezing, shortness of breath and
pulmonary edema. Causes chemical burns to the respiratory tract. May
cause abdominal pain, nausea, vomiting, and inflammation of the gums
and mouth.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Immediately flush skin with plenty of water for at
least 15 minutes while removing contaminated clothing and shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear.
Extinguishing Media:
Do NOT use water directly on fire. Use foam, dry chemical, or carbon
dioxide.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Clean up spills immediately, observing precautions in the
Protective Equipment section.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Wash hands before eating. Remove
contaminated clothing and wash before reuse. Use with adequate
ventilation. Do not get in eyes, on skin, or on clothing. Do not
ingest or inhale.
Storage:
Store in a cool, dry place. Store in a tightly closed container.
Corrosives area.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate general or local explosion-proof ventilation to keep
airborne levels to acceptable levels.
Exposure Limits
CAS# 14002-51-8:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective clothing to minimize
contact with skin.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: white
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: @ 760.00mm Hg
Freezing/Melting Point: 110 - 112 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: soluble in chloroform, dmf
Specific Gravity/Density:
Molecular Formula: C13H9ClO
Molecular Weight: 216.67

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, exposure to moist air or water.
Incompatibilities with Other Materials:
Alcohol, oxidizing agents, strong bases, and water.
Hazardous Decomposition Products:
Hydrogen chloride, carbon monoxide, carbon dioxide, phosgene gas.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 14002-51-8 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
4-Biphenylcarbonyl chloride, 98% -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: CORROSIVE SOLID, N.O.S.*
Hazard Class: 8
UN Number: 1759
Packing Group: II
IMO
Shipping Name: CORROSIVE SOLID, N.O.S.
Hazard Class: 8
UN Number: 1759
Packing Group: II
RID/ADR
Shipping Name: CORROSIVE SOLID, N.O.S.
Hazard Class: 8
UN Number: 1759
Packing group: II

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 25 Avoid contact with eyes.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 14002-51-8: No information available.
Canada
CAS# 14002-51-8 is listed on Canada's NDSL List.
CAS# 14002-51-8 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 14002-51-8 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Neodymium chloride hexahydrate, 99.99% 13477-89-9
4-Methylbenzophenone, 97% 134-84-9
4-Biphenylcarbonyl chloride, 98% 14002-51-8
1,4-Dicyanobenzene, 98% 623-26-7
2-Iodophenol 533-58-4
d-alpha-Tocopheryl acid succinate, 99+% (gc) 4345-03-3
2-Cyclopentylidenecyclopentanone, 97% 825-25-2
1,4-Dichloro-2-Iodobenzene, 98% 29682-41-5
6-P-Toluidine-2-Naphthalenesulfonic Acid, 99% (Titr.) 7724-15-4
N,N'-Diethyl-2-Butene-1,4-Diamine, 97% 112-21-0
1-Amino-5,6,7,8-tetrahydronaphthalene, tech., 90% 2217-41-6
N-Ethylbenzylamine, 97% 14321-27-8
Allyl phenoxyacetate, 98+% 7493-74-5
3-Nitrostyrene, 97% 586-39-0
Ruthenium on alumina powder (5% ru)
Nipecotamide, 95% 4138-26-5
8-Hydroxy-7-(6-Sulfo-2-Naphthylazo)-5-Quinolinesulfonic Acid Disodium 56932-43-5
Molybdocene Dichloride 12184-22-4
1,2,3,5-Tetramethylbenzene, Tech., 85+% 527-53-7
Androsterone, 97% 53-41-8
1,3-Dimethyl-5-aminoadamantane hydrochloride 19982-08-2
4-Methoxyphenylhydrazine hydrochloride 98% 19501-58-7
2,4,6-Trichloropyrimidine, 99% 3764-01-0
1-Bromo-3-phenylpropane, 98% 637-59-2
Aluminum Tert-Butoxide, 98% (Grav.) 556-91-2
4-Aminothiophenol,96% 1193-02-8
1,2-Dimethyl-3-Hydroxy-4-Pyridone, 99+% 30652-11-0
1,1,1-Tris-(Hydroxymethyl)-Ethane, 97% 77-85-0
4-Benzoylpyridine, 98% 14548-46-0
tert-Butylchlorodiphenylsilane, 98% 58479-61-1
4,4'-Azodianiline, 95% (Titr.) 538-41-0
2-Methyl-5-nitroaniline, 99% 99-55-8
(s)-(-)-1-Benzylglycerol, 98% 17325-85-8
Maleimide, 98% 541-59-3
2-Chlorobenzoxazole, 99% (GC) 615-18-9
Methyl Thiocyanate, 99% 556-64-9
Alpha, 4-Dichloroanisole, 97% 21151-56-4
Lanthanum hexaboride, 99% 12008-21-8
Dl-methyl mandelate, 97% 4358-87-6
(5-z)-9-deoxy-6,9alpha-epoxy-PGF1alpha, sodium salt, 98%, stab. with 61849-14-7
(-)-2-Cyano-6-Phenyloxazolopiperidine, 99+% 88056-92-2
3,4-Dichloroaniline, 98% 95-76-1
Indole, 99+% 120-72-9
3-Methylbenzophenone, 99% 643-65-2
3-Hydroxy-6-Methyl-2-Nitropyridine, 99% 15128-90-2
1,1,3,3-Tetramethyl-2-thiourea, 98% 2782-91-4
1,2-Bis(2-aminophenoxy)-ethane-N,N,N', N'-tetraacetic acid 126824-24-6
6-Amino-5-nitroso-2-thiouracil, 99% 1672-48-6
N,N-Diethylaniline, 99% 91-66-7
Tetraethylammonium tetrafluoroborate, 99% 429-06-1

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net