Search   
MSDS 
:
 2-Cyclopentylidenecyclopentanone, 97%
CAS 
:
 825-25-2
SYNONYMS 
:
 None.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 825-25-2 |2-Cyclopentylidenecyclopentanone, 97% | 97% | 212-542-7 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully
investigated.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. The toxicological properties of this substance have not
been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid if cough or other symptoms appear.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or chemical foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Clean up spills immediately,
observing precautions in the Protective Equipment section.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Wash hands before eating. Use with
adequate ventilation. Avoid breathing dust, vapor, mist, or gas. Do
not get on skin or in eyes. Do not ingest or inhale.
Storage:
Store in a cool, dry place. Store in a tightly closed container.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate general or local exhaust ventilation to keep airborne
concentrations below the permissible exposure limits.
Exposure Limits
CAS# 825-25-2:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear yellow
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 139 - 142 deg C @ 20.00mm Hg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: 103 deg C ( 217.40 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: 1.0010g/cm3
Molecular Formula: C10H14O
Molecular Weight: 150.22

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 825-25-2 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
2-Cyclopentylidenecyclopentanone, 97% -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
IMO
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
RID/ADR
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing group:

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 825-25-2: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 825-25-2 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 825-25-2 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Neodymium chloride hexahydrate, 99.99% 13477-89-9
4-Methylbenzophenone, 97% 134-84-9
4-Biphenylcarbonyl chloride, 98% 14002-51-8
1,4-Dicyanobenzene, 98% 623-26-7
2-Iodophenol 533-58-4
d-alpha-Tocopheryl acid succinate, 99+% (gc) 4345-03-3
2-Cyclopentylidenecyclopentanone, 97% 825-25-2
1,4-Dichloro-2-Iodobenzene, 98% 29682-41-5
6-P-Toluidine-2-Naphthalenesulfonic Acid, 99% (Titr.) 7724-15-4
N,N'-Diethyl-2-Butene-1,4-Diamine, 97% 112-21-0
1-Amino-5,6,7,8-tetrahydronaphthalene, tech., 90% 2217-41-6
N-Ethylbenzylamine, 97% 14321-27-8
Allyl phenoxyacetate, 98+% 7493-74-5
3-Nitrostyrene, 97% 586-39-0
Ruthenium on alumina powder (5% ru)
Nipecotamide, 95% 4138-26-5
8-Hydroxy-7-(6-Sulfo-2-Naphthylazo)-5-Quinolinesulfonic Acid Disodium 56932-43-5
Molybdocene Dichloride 12184-22-4
1,2,3,5-Tetramethylbenzene, Tech., 85+% 527-53-7
Androsterone, 97% 53-41-8
1,3-Dimethyl-5-aminoadamantane hydrochloride 19982-08-2
4-Methoxyphenylhydrazine hydrochloride 98% 19501-58-7
2,4,6-Trichloropyrimidine, 99% 3764-01-0
1-Bromo-3-phenylpropane, 98% 637-59-2
Aluminum Tert-Butoxide, 98% (Grav.) 556-91-2
4-Aminothiophenol,96% 1193-02-8
1,2-Dimethyl-3-Hydroxy-4-Pyridone, 99+% 30652-11-0
1,1,1-Tris-(Hydroxymethyl)-Ethane, 97% 77-85-0
4-Benzoylpyridine, 98% 14548-46-0
tert-Butylchlorodiphenylsilane, 98% 58479-61-1
4,4'-Azodianiline, 95% (Titr.) 538-41-0
2-Methyl-5-nitroaniline, 99% 99-55-8
(s)-(-)-1-Benzylglycerol, 98% 17325-85-8
Maleimide, 98% 541-59-3
2-Chlorobenzoxazole, 99% (GC) 615-18-9
Methyl Thiocyanate, 99% 556-64-9
Alpha, 4-Dichloroanisole, 97% 21151-56-4
Lanthanum hexaboride, 99% 12008-21-8
Dl-methyl mandelate, 97% 4358-87-6
(5-z)-9-deoxy-6,9alpha-epoxy-PGF1alpha, sodium salt, 98%, stab. with 61849-14-7
(-)-2-Cyano-6-Phenyloxazolopiperidine, 99+% 88056-92-2
3,4-Dichloroaniline, 98% 95-76-1
Indole, 99+% 120-72-9
3-Methylbenzophenone, 99% 643-65-2
3-Hydroxy-6-Methyl-2-Nitropyridine, 99% 15128-90-2
1,1,3,3-Tetramethyl-2-thiourea, 98% 2782-91-4
1,2-Bis(2-aminophenoxy)-ethane-N,N,N', N'-tetraacetic acid 126824-24-6
6-Amino-5-nitroso-2-thiouracil, 99% 1672-48-6
N,N-Diethylaniline, 99% 91-66-7
Tetraethylammonium tetrafluoroborate, 99% 429-06-1

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net