Search   
MSDS 
:
 (5-z)-9-deoxy-6,9alpha-epoxy-PGF1alpha, sodium salt, 98%, stab. with
CAS 
:
 61849-14-7
SYNONYMS 
:
 Prostacycline sodium salt; PGI2-Na
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 61849-14-7 |(5-z)-9-deoxy-6,9alpha-epoxy-pgf1alpha| 98 | 263-273-7 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Hygroscopic (absorbs moisture from the air).The toxicological
properties of this material have not been fully investigated.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. The toxicological properties of this substance have not
been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated. May cause
irritation of the mucous membranes.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes. Wash clothing before reuse.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
In case of fire, use carbon dioxide, dry chemical powder or
appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Wash area with soap and water. Clean up spills immediately,
observing precautions in the Protective Equipment section. Sweep up,
then place into a suitable container for disposal. Avoid generating
dusty conditions. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Avoid contact with
eyes, skin, and clothing. Avoid ingestion and inhalation. Use only
in a chemical fume hood.
Storage:
Store in a cool, dry place. Keep container closed when not in use.
Deep freeze (below -20C).

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use process enclosure,
local exhaust ventilation, or other engineering controls to control
airborne levels.
Exposure Limits
CAS# 61849-14-7:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: white
Odor: none reported
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 168.00 - 170.00 deg C
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: soluble
Specific Gravity/Density: Not available.
Molecular Formula: C20H31O5Na
Molecular Weight: 374.45

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, moisture.
Incompatibilities with Other Materials:
Moisture.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide.
Hazardous Polymerization: Will not occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 61849-14-7 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
(5-z)-9-deoxy-6,9alpha-epoxy-pgf1alpha,sodium salt -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Other
No information available.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 61849-14-7: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 61849-14-7 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 61849-14-7 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 6/21/1999 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Neodymium chloride hexahydrate, 99.99% 13477-89-9
4-Methylbenzophenone, 97% 134-84-9
4-Biphenylcarbonyl chloride, 98% 14002-51-8
1,4-Dicyanobenzene, 98% 623-26-7
2-Iodophenol 533-58-4
d-alpha-Tocopheryl acid succinate, 99+% (gc) 4345-03-3
2-Cyclopentylidenecyclopentanone, 97% 825-25-2
1,4-Dichloro-2-Iodobenzene, 98% 29682-41-5
6-P-Toluidine-2-Naphthalenesulfonic Acid, 99% (Titr.) 7724-15-4
N,N'-Diethyl-2-Butene-1,4-Diamine, 97% 112-21-0
1-Amino-5,6,7,8-tetrahydronaphthalene, tech., 90% 2217-41-6
N-Ethylbenzylamine, 97% 14321-27-8
Allyl phenoxyacetate, 98+% 7493-74-5
3-Nitrostyrene, 97% 586-39-0
Ruthenium on alumina powder (5% ru)
Nipecotamide, 95% 4138-26-5
8-Hydroxy-7-(6-Sulfo-2-Naphthylazo)-5-Quinolinesulfonic Acid Disodium 56932-43-5
Molybdocene Dichloride 12184-22-4
1,2,3,5-Tetramethylbenzene, Tech., 85+% 527-53-7
Androsterone, 97% 53-41-8
1,3-Dimethyl-5-aminoadamantane hydrochloride 19982-08-2
4-Methoxyphenylhydrazine hydrochloride 98% 19501-58-7
2,4,6-Trichloropyrimidine, 99% 3764-01-0
1-Bromo-3-phenylpropane, 98% 637-59-2
Aluminum Tert-Butoxide, 98% (Grav.) 556-91-2
4-Aminothiophenol,96% 1193-02-8
1,2-Dimethyl-3-Hydroxy-4-Pyridone, 99+% 30652-11-0
1,1,1-Tris-(Hydroxymethyl)-Ethane, 97% 77-85-0
4-Benzoylpyridine, 98% 14548-46-0
tert-Butylchlorodiphenylsilane, 98% 58479-61-1
4,4'-Azodianiline, 95% (Titr.) 538-41-0
2-Methyl-5-nitroaniline, 99% 99-55-8
(s)-(-)-1-Benzylglycerol, 98% 17325-85-8
Maleimide, 98% 541-59-3
2-Chlorobenzoxazole, 99% (GC) 615-18-9
Methyl Thiocyanate, 99% 556-64-9
Alpha, 4-Dichloroanisole, 97% 21151-56-4
Lanthanum hexaboride, 99% 12008-21-8
Dl-methyl mandelate, 97% 4358-87-6
(5-z)-9-deoxy-6,9alpha-epoxy-PGF1alpha, sodium salt, 98%, stab. with 61849-14-7
(-)-2-Cyano-6-Phenyloxazolopiperidine, 99+% 88056-92-2
3,4-Dichloroaniline, 98% 95-76-1
Indole, 99+% 120-72-9
3-Methylbenzophenone, 99% 643-65-2
3-Hydroxy-6-Methyl-2-Nitropyridine, 99% 15128-90-2
1,1,3,3-Tetramethyl-2-thiourea, 98% 2782-91-4
1,2-Bis(2-aminophenoxy)-ethane-N,N,N', N'-tetraacetic acid 126824-24-6
6-Amino-5-nitroso-2-thiouracil, 99% 1672-48-6
N,N-Diethylaniline, 99% 91-66-7
Tetraethylammonium tetrafluoroborate, 99% 429-06-1

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net