Search   
MSDS 
:
 Oxalic Acid Potassium Salt, Dihydrate, 99% (Titr.)
CAS 
:
 127-96-8
SYNONYMS 
:
 None Known.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 127-96-8 |Oxalic Acid Potassium Salt, Dihydrate | 99% | 204-874-6 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XN
Risk Phrases: 21/22

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Harmful in contact with skin and if swallowed.The toxicological
properties of this material have not been fully investigated.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract. May cause cardiac
disturbances. The toxicological properties of this substance have not
been fully investigated. May cause central nervous system depression.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated. May cause cardiac
abnormalities. Inhalation at high concentrations may cause CNS
depression and asphixiation.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Runoff from
fire control or dilution water may cause pollution.
Extinguishing Media:
Use agent most appropriate to extinguish fire. Use water spray, dry
chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Clean up spills immediately, observing precautions in the
Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Minimize dust
generation and accumulation. Avoid contact with eyes, skin, and
clothing. Keep container tightly closed. Avoid ingestion and
inhalation.
Storage:
Keep container closed when not in use. Store in a tightly closed
container. Store in a cool, dry, well-ventilated area away from
incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 127-96-8:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Crystalline powder
Color: white
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: slightly soluble in water
Specific Gravity/Density:
Molecular Formula: C4H3KO8.2H2O
Molecular Weight: 254.19

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, dust generation, excess heat, strong
oxidants.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 127-96-8 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Oxalic Acid Potassium Salt, Dihydrate -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: TOXIC SOLID, ORGANIC, N.O.S.*
Hazard Class: 6.1
UN Number: 2811
Packing Group: III
IMO
Shipping Name: TOXIC SOLID, ORGANIC, N.O.S.
Hazard Class: 6.1
UN Number: 2811
Packing Group: III
RID/ADR
Shipping Name: TOXIC SOLID, ORGANIC, N.O.S.
Hazard Class: 6.1
UN Number: 2811
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
Risk Phrases:
R 21/22 Harmful in contact with skin and if
swallowed.
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 127-96-8: No information available.
Canada
CAS# 127-96-8 is listed on Canada's NDSL List.
CAS# 127-96-8 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 127-96-8 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #4 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
4-Chloromethyl-2-methylquinoline hydrochloride 0-00-1
2,4,5-Trifluoroaniline, 99% 367-34-0
2,4-Diamino-5-Phenylthiazole Monohydrobromide 6020-54-8
1,4-Dibromobenzene-d4, 98 atom% D 4165-56-4
5-Hydroxy-1-Naphthalenesulfonamide, 98% 17286-26-9
2-Ethyl-1,3-Cyclopentanedione, 99% 823-36-9
Sodium persulfate, 5-25% w/v 7732-18-5
3-Buten-2-ol, 98% 598-32-3
Tert.-butan(ol-d), 98+ atom % d 3972-25-6
Copper(II) chromate 13548-42-0
Five Alcohol Blend 67-63-0
Gas Generating Kit (Campylobacter System) 87-69-4
(Bromodifluoromethyl)triphenylphosphonium bromide, 97% 58201-66-4
Lancerclean Detergent 0-00-1
Casein, Tech. 9000-71-9
Lancerinse Lancer Acid 64-19-7
Sodium Hydroxide 6.25% W/V 1310-73-2
Oxalic Acid Potassium Salt, Dihydrate, 99% (Titr.) 127-96-8
L-Leucine-(4-Methyl-7-Coumarinylamide) Hydrochloride, 99% 62480-44-8
4 Alcohol Blend 71-23-8
4-(2-Thienyl)-3-O-MOP-B-Lactam 0-00-1
2,6-Dichloro-3-Nitrobenzenesulfonamide, 98% 89281-19-6
Water--UK 7732-18-5
Orthophosphoric acid, 2.5% w/w 7664-38-2
0.1% Trifluoroacetic acid blended into acetonitrile 75-05-8
3-Morpholinopropanoic Acid Hydrobromic Salt 4497-04-5
3-Morpholinopropanol 4441-30-9
3-Morpholinopropanal 1M solution in acetone 67-64-1
3-(N-Methylpiperazine)-Propanoic Acid Hydrobromide Salt 0-00-1
3-(N-Methylpiperazine)-Propanol 5317-33-9
3-(N-Methylpiperazine)propanal 1M solution in acetone. 0-00-1
3-(N-Methylpiperazine)-Propyl Bromide Hydrobromic Salt 0-00-1
3-[1H-(1,2,4-Triazolyl)]-Propanoic Acid 76686-84-5
3-[1H-(1,2,4-Triazolyl)]-Propanol 84497-70-1
3-[1H-(1,2,4-Triazoyl)]-Propanal 10% wt/v Solution in Dichloromethane 0-00-1
3-[1H-(1,2,4-Triazolyl)]-Propylbromide Hydrobromide Salt 0-00-1
3-[1H-(1,2,4-Triazoyl)]-Propanamine Dihydrochloride Salt 69807-82-5
Aqualine Electrolyte CG 67-56-1
Ethyl-2-Bromobenzoate, 98% 6091-64-1
Aqualine Electrolyte AG 0-00-0
2,6-Dichloro-3-nitrobenzenesulfonamide 89281-19-6
Oxoid Anaerogen 50-81-7
Pyridine, 65% in Water 110-86-1
Trans-1-Acetyl-4-Hydroxy-2-Proline 33996-33-7
1,1,1-Trifluoro-2,4-Pentanedione, 98% 367-57-7
Diaminethanetetra-Acetic Acid, Disodium Salt, 18.5 g/L Solution. 0-00-1
Sulfuric Acid/Orthophosphoric Acid Mixture 7664-38-2
Amberlyst xn-1010 ion-exchange resin 54991-00-3
Tetrakis(triphenylphosphine)nickel(0) 15133-82-1
Sodium Carbonate 0.274N 497-19-8

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net