**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 58201-66-4 |(Bromodifluoromethyl)triphenylphosphon| 97 | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully
investigated.
Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract. The toxicological
properties of this substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
No information found.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
In case of contact, immediately flush eyes with plenty of water for
at least 15 minutes. Get medical aid.
Skin:
In case of contact, flush skin with plenty of water. Remove
contaminated clothing and shoes. Get medical aid if irritation
develops and persists. Wash clothing before reuse.
Ingestion:
If swallowed, do not induce vomiting unless directed to do so by
medical personnel. Never give anything by mouth to an unconscious
person. Get medical aid.
Inhalation:
If inhaled, remove to fresh air. If not breathing, give artificial
respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. This
material in sufficient quantity and reduced particle size is capable
of creating a dust explosion.
Extinguishing Media:
Use extinguishing media most appropriate for the surrounding fire.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Clean up spills immediately, observing precautions in the
Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Minimize dust
generation and accumulation. Avoid contact with eyes, skin, and
clothing. Keep container tightly closed. Avoid breathing dust.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 58201-66-4:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Powder
Color: white
Odor: none reported
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 179-184 deg C
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C19H15Br2F2P
Molecular Weight: 472.12
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Dust generation, excess heat.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, oxides of phosphorus, irritating and toxic fumes and
gases, carbon dioxide, hydrogen fluoride gas, hydrogen bromide.
Hazardous Polymerization: Has not been reported
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 58201-66-4 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
(Bromodifluoromethyl)triphenylphosphonium bromide -
Not listed by ACGIH, IARC, or NTP.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
No information available.
IMO
No information available.
RID/ADR
No information available.
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 58201-66-4: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 58201-66-4 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 58201-66-4 is not listed on the TSCA inventory.
It is for research and development use only.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 9/13/1999 Revision #4 Date: 10/05/2004
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
ALL MSDS PAGES IN THIS GROUP
| NAME | CAS |
4-Chloromethyl-2-methylquinoline hydrochloride
| 0-00-1 |
2,4,5-Trifluoroaniline, 99%
| 367-34-0 |
2,4-Diamino-5-Phenylthiazole Monohydrobromide
| 6020-54-8 |
1,4-Dibromobenzene-d4, 98 atom% D
| 4165-56-4 |
5-Hydroxy-1-Naphthalenesulfonamide, 98%
| 17286-26-9 |
2-Ethyl-1,3-Cyclopentanedione, 99%
| 823-36-9 |
Sodium persulfate, 5-25% w/v
| 7732-18-5 |
3-Buten-2-ol, 98%
| 598-32-3 |
Tert.-butan(ol-d), 98+ atom % d
| 3972-25-6 |
Copper(II) chromate
| 13548-42-0 |
Five Alcohol Blend
| 67-63-0 |
Gas Generating Kit (Campylobacter System)
| 87-69-4 |
(Bromodifluoromethyl)triphenylphosphonium bromide, 97%
| 58201-66-4 |
Lancerclean Detergent
| 0-00-1 |
Casein, Tech.
| 9000-71-9 |
Lancerinse Lancer Acid
| 64-19-7 |
Sodium Hydroxide 6.25% W/V
| 1310-73-2 |
Oxalic Acid Potassium Salt, Dihydrate, 99% (Titr.)
| 127-96-8 |
L-Leucine-(4-Methyl-7-Coumarinylamide) Hydrochloride, 99%
| 62480-44-8 |
4 Alcohol Blend
| 71-23-8 |
4-(2-Thienyl)-3-O-MOP-B-Lactam
| 0-00-1 |
2,6-Dichloro-3-Nitrobenzenesulfonamide, 98%
| 89281-19-6 |
Water--UK
| 7732-18-5 |
Orthophosphoric acid, 2.5% w/w
| 7664-38-2 |
0.1% Trifluoroacetic acid blended into acetonitrile
| 75-05-8 |
3-Morpholinopropanoic Acid Hydrobromic Salt
| 4497-04-5 |
3-Morpholinopropanol
| 4441-30-9 |
3-Morpholinopropanal 1M solution in acetone
| 67-64-1 |
3-(N-Methylpiperazine)-Propanoic Acid Hydrobromide Salt
| 0-00-1 |
3-(N-Methylpiperazine)-Propanol
| 5317-33-9 |
3-(N-Methylpiperazine)propanal 1M solution in acetone.
| 0-00-1 |
3-(N-Methylpiperazine)-Propyl Bromide Hydrobromic Salt
| 0-00-1 |
3-[1H-(1,2,4-Triazolyl)]-Propanoic Acid
| 76686-84-5 |
3-[1H-(1,2,4-Triazolyl)]-Propanol
| 84497-70-1 |
3-[1H-(1,2,4-Triazoyl)]-Propanal 10% wt/v Solution in Dichloromethane
| 0-00-1 |
3-[1H-(1,2,4-Triazolyl)]-Propylbromide Hydrobromide Salt
| 0-00-1 |
3-[1H-(1,2,4-Triazoyl)]-Propanamine Dihydrochloride Salt
| 69807-82-5 |
Aqualine Electrolyte CG
| 67-56-1 |
Ethyl-2-Bromobenzoate, 98%
| 6091-64-1 |
Aqualine Electrolyte AG
| 0-00-0 |
2,6-Dichloro-3-nitrobenzenesulfonamide
| 89281-19-6 |
Oxoid Anaerogen
| 50-81-7 |
Pyridine, 65% in Water
| 110-86-1 |
Trans-1-Acetyl-4-Hydroxy-2-Proline
| 33996-33-7 |
1,1,1-Trifluoro-2,4-Pentanedione, 98%
| 367-57-7 |
Diaminethanetetra-Acetic Acid, Disodium Salt, 18.5 g/L Solution.
| 0-00-1 |
Sulfuric Acid/Orthophosphoric Acid Mixture
| 7664-38-2 |
Amberlyst xn-1010 ion-exchange resin
| 54991-00-3 |
Tetrakis(triphenylphosphine)nickel(0)
| 15133-82-1 |
Sodium Carbonate 0.274N
| 497-19-8 |
|
|