**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
|----------------|--------------------------------------|----------|-----------|
| 140-01-2 |Diethylenetriaminepentaacetic acid, pe| 40 | 205-391-3 |
| |ntasodium salt | | |
|----------------|--------------------------------------|----------|-----------|
| 7732-18-5 |Water | Balance | 231-791-2 |
+----------------+--------------------------------------+----------+-----------+
Text for R-phrases: see Section 16
Hazard Symbols: XI
Risk Phrases: 36
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Irritating to eyes.
Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause digestive tract disturbances.
Inhalation:
May cause respiratory tract irritation.
Chronic:
No information found.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse. Remove contaminated clothing and shoes.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use agent most appropriate to extinguish fire. Use water spray, dry
chemical, carbon dioxide, or appropriate foam.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Clean up spills immediately,
observing precautions in the Protective Equipment section. Flush
spill area with water. Provide ventilation.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use only in a well-ventilated area. Avoid contact
with eyes, skin, and clothing. Avoid ingestion and inhalation.
Storage:
Store in a cool, dry place. Keep container closed when not in use.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Use process enclosure, local exhaust ventilation, or other
engineering controls to control airborne levels.
Exposure Limits
CAS# 140-01-2:
CAS# 7732-18-5:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Liquid
Color: clear faint yellow
Odor: none reported
pH: Not available.
Vapor Pressure: Not available.
Viscosity: mPas 23 deg C
Boiling Point: 106 deg C @ 760.00mm Hg
Freezing/Melting Point: -40 deg C
Autoignition Temperature: > 200 deg C (> 392.00 deg F)
Flash Point: > 93.3 deg C (> 199.94 deg F)
Explosion Limits, lower: N/A
Explosion Limits, upper: N/A
Decomposition Temperature:
Solubility in water: soluble
Specific Gravity/Density: 1.2990g/cm3
Molecular Formula: C14H18N3Na5O10
Molecular Weight: 503.26
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, strong oxidants.
Incompatibilities with Other Materials:
Not available.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, irritating and toxic fumes and
gases, carbon dioxide.
Hazardous Polymerization: Not available.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 140-01-2 unlisted.
CAS# 7732-18-5: ZC0110000
LD50/LC50:
Not available.
CAS# 7732-18-5: Oral, rat: LD50 = >90 mL/kg.
Carcinogenicity:
Diethylenetriaminepentaacetic acid, pentasodium salt -
Not listed by ACGIH, IARC, or NTP.
Water -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36 Irritating to eyes.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 39 Wear eye/face protection.
WGK (Water Danger/Protection)
CAS# 140-01-2: 2
CAS# 7732-18-5: No information available.
Canada
CAS# 140-01-2 is listed on Canada's DSL List.
CAS# 7732-18-5 is listed on Canada's DSL List.
CAS# 140-01-2 is not listed on Canada's Ingredient Disclosure List.
CAS# 7732-18-5 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 140-01-2 is listed on the TSCA inventory.
CAS# 7732-18-5 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
Text for R-phrases from Section 2
MSDS Creation Date: 1/22/1998 Revision #2 Date: 3/18/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
Benzo[b]selenophene, 99%
| 272-30-0 |
|
Triton X-100
| 9002-93-1 |
|
N-Chlorosuccinimide, 98+%
| 128-09-6 |
|
Trypsin
| 9002-07-7 |
|
3-(Maleimidomethyl)-Proxyl, Free Radical
| 54060-41-2 |
|
4-Nitro-O-Phenylenediamine, 95% (UV-VIS)
| 99-56-9 |
|
(R)-(+)-1,1'-Bi-2-naphthol, 99%
| 18531-94-7 |
|
Calix[6]Arene, 99% (TLC)
| 96107-95-8 |
|
2-Methylene-3-quinuclidinone hydrochloride dihydrate, 97%
| 5832-55-3 |
|
Tungsten (VI) Oxide
| 1314-35-8 |
|
[Tetra(diphenoxyphosphoryl)]tetra-methylcalix[4]resorcinolarene, 98%
| 160399-36-0 |
|
Allantoin, 98%
| 97-59-6 |
|
Turpentine Oil
| 8006-64-2 |
|
2,6-Dichlorobenzonitrile, 97%
| 1194-65-6 |
|
Methyllithium, low chloride, 1.6 M in diethyl ether (+/- 5% w/v)
| 60-29-7 |
|
Uranine
| 518-47-8 |
|
Lauryl chloride, 99%
| 112-52-7 |
|
2-(3-Hydroxycarbonyl-2-nitrophenyl) malondialdehyde, 95%
| |
|
Ethyl 3,3-Dimethylaminoacrylate, 99+%
| 924-99-2 |
|
DL-4-Chloro-Alpha-Methylphenylacetic Acid, 98%
| 938-95-4 |
|
3-Amino-3-phenylpropionic acid, tech. 90+% remainder dl-phenylalanine
| 150-30-1 |
|
Diethylenetriaminepentaacetic Acid Pentasodium Salt (Techn) (40% in
| 140-01-2 |
|
4-Fluorophenyl isothiocyanate, 98%
| 1544-68-9 |
|
N,N'-Dicarboxymethyldiaza-18-Crown-6, 99+%
| 0-01-1 |
|
Urea
| 57-13-6 |
|
2,6-Dichlorostyrene, 98%
| 28469-92-3 |
|
3-Methyl-2-cyclopenten-1-one, 98%
| 2758-18-1 |
|
1-Methylpyrrolidine, 98%
| 120-94-5 |
|
2-Mercaptothiazoline, 98%
| 96-53-7 |
|
2,4-Dihydroxypyridine, 97%
| 626-03-9 |
|
4-Amino-1-Naphthalenecarbonitrille, 98%
| 58728-64-6 |
|
Diethyl 2-Bromoethylphosphonate, 97%
| 5324-30-1 |
|
Bis(4-Dimethylaminodithiobenzil)Nickel, Laser Grade, 99% (UV-Vis)
| 38465-55-3 |
|
1,1,1-Trifluoro-5,5-Dimethyl-2,4-Hexane-Dione, 99% (GC)
| 22767-90-4 |
|
1-Butanesulfonic acid, sodium salt, 98%
| 2386-54-1 |
|
Malonamide, 97%
| 108-13-4 |
|
Anisoin, 95%
| 119-52-8 |
|
Bismarck Brown Y (Cert)
| 10114-58-6 |
|
Methyl p-tolyl sulfone, 99+%
| 3185-99-7 |
|
Dl-phenylalanine-d11
| |
|
Methyl thioglycolate, 95%
| 2365-48-2 |
|
Vanadyl Sulfate
| 27774-13-6 |
|
6-Hydroxy-2,4,5-triaminopyrimidine Sulfate Hydrate, 98%
| 35011-47-3 |
|
1-Ethynylcyclopentanol, 98%
| 17356-19-3 |
|
Fast Red B Salt
| 27761-26-8 |
|
2-Fluoropyridine, 98%
| 372-48-5 |
|
Benzyl isothiocyanate, 98% (GC)
| 622-78-6 |
|
Cytosine Arabinoside Hydrochloride
| 69-74-9 |
|
Vanillin
| 121-33-5 |
|
2,3-Dimethylaniline, 99%
| 87-59-2 |
|
|