Search   
MSDS 
:
 4-Amino-1-Naphthalenecarbonitrille, 98%
CAS 
:
 58728-64-6
SYNONYMS 
:
 None.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 58728-64-6 |4-Amino-1-Naphthalenecarbonitrille | 98 | 261-412-6 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XN
Risk Phrases: 20/21

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Harmful by inhalation and in contact with skin.The toxicological
properties of this material have not been fully investigated.

Potential Health Effects
Eye:
May cause eye irritation. The toxicological properties of this
material have not been fully investigated.
Skin:
May cause skin irritation. The toxicological properties of this
material have not been fully investigated.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. The toxicological properties of this substance have not
been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Vapors may
be heavier than air. They can spread along the ground and collect
in low or confined areas.
Extinguishing Media:
Use agent most appropriate to extinguish fire. Use water spray, dry
chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up or absorb material, then place into a
suitable clean, dry, closed container for disposal. Avoid generating
dusty conditions. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation. Avoid
contact with eyes, skin, and clothing. Keep container tightly closed.
Avoid ingestion and inhalation.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 58728-64-6:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: beige brown to brown
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 174.50 - 176.50 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: N/A
Explosion Limits, upper: N/A
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C11H8N2
Molecular Weight: 168.20

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Incompatible materials, excess heat, oxidizers.
Incompatibilities with Other Materials:
Acids, acid chlorides, acid anhydrides, chloroformates, strong bases,
strong oxidizing agents.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, irritating and toxic fumes and
gases, carbon dioxide, nitrogen.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 58728-64-6: QJ1865000
LD50/LC50:
Not available.
Carcinogenicity:
4-Amino-1-Naphthalenecarbonitrille -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: TOXIC SOLID, ORGANIC, N.O.S.*
Hazard Class: 6.1
UN Number: 2811
Packing Group: III
IMO
Shipping Name: TOXIC SOLID, ORGANIC, N.O.S.
Hazard Class: 6.1
UN Number: 2811
Packing Group: III
RID/ADR
Shipping Name: TOXIC SOLID, ORGANIC, N.O.S.
Hazard Class: 6.1
UN Number: 2811
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
Risk Phrases:
R 20/21 Harmful by inhalation and in contact with
skin.
Safety Phrases:
S 23 Do not inhale gas/fumes/vapour/spray.
S 28A After contact with skin, wash immediately with
plenty of water.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 58728-64-6: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 58728-64-6 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 58728-64-6 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 5/22/1998 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Benzo[b]selenophene, 99% 272-30-0
Triton X-100 9002-93-1
N-Chlorosuccinimide, 98+% 128-09-6
Trypsin 9002-07-7
3-(Maleimidomethyl)-Proxyl, Free Radical 54060-41-2
4-Nitro-O-Phenylenediamine, 95% (UV-VIS) 99-56-9
(R)-(+)-1,1'-Bi-2-naphthol, 99% 18531-94-7
Calix[6]Arene, 99% (TLC) 96107-95-8
2-Methylene-3-quinuclidinone hydrochloride dihydrate, 97% 5832-55-3
Tungsten (VI) Oxide 1314-35-8
[Tetra(diphenoxyphosphoryl)]tetra-methylcalix[4]resorcinolarene, 98% 160399-36-0
Allantoin, 98% 97-59-6
Turpentine Oil 8006-64-2
2,6-Dichlorobenzonitrile, 97% 1194-65-6
Methyllithium, low chloride, 1.6 M in diethyl ether (+/- 5% w/v) 60-29-7
Uranine 518-47-8
Lauryl chloride, 99% 112-52-7
2-(3-Hydroxycarbonyl-2-nitrophenyl) malondialdehyde, 95%
Ethyl 3,3-Dimethylaminoacrylate, 99+% 924-99-2
DL-4-Chloro-Alpha-Methylphenylacetic Acid, 98% 938-95-4
3-Amino-3-phenylpropionic acid, tech. 90+% remainder dl-phenylalanine 150-30-1
Diethylenetriaminepentaacetic Acid Pentasodium Salt (Techn) (40% in 140-01-2
4-Fluorophenyl isothiocyanate, 98% 1544-68-9
N,N'-Dicarboxymethyldiaza-18-Crown-6, 99+% 0-01-1
Urea 57-13-6
2,6-Dichlorostyrene, 98% 28469-92-3
3-Methyl-2-cyclopenten-1-one, 98% 2758-18-1
1-Methylpyrrolidine, 98% 120-94-5
2-Mercaptothiazoline, 98% 96-53-7
2,4-Dihydroxypyridine, 97% 626-03-9
4-Amino-1-Naphthalenecarbonitrille, 98% 58728-64-6
Diethyl 2-Bromoethylphosphonate, 97% 5324-30-1
Bis(4-Dimethylaminodithiobenzil)Nickel, Laser Grade, 99% (UV-Vis) 38465-55-3
1,1,1-Trifluoro-5,5-Dimethyl-2,4-Hexane-Dione, 99% (GC) 22767-90-4
1-Butanesulfonic acid, sodium salt, 98% 2386-54-1
Malonamide, 97% 108-13-4
Anisoin, 95% 119-52-8
Bismarck Brown Y (Cert) 10114-58-6
Methyl p-tolyl sulfone, 99+% 3185-99-7
Dl-phenylalanine-d11
Methyl thioglycolate, 95% 2365-48-2
Vanadyl Sulfate 27774-13-6
6-Hydroxy-2,4,5-triaminopyrimidine Sulfate Hydrate, 98% 35011-47-3
1-Ethynylcyclopentanol, 98% 17356-19-3
Fast Red B Salt 27761-26-8
2-Fluoropyridine, 98% 372-48-5
Benzyl isothiocyanate, 98% (GC) 622-78-6
Cytosine Arabinoside Hydrochloride 69-74-9
Vanillin 121-33-5
2,3-Dimethylaniline, 99% 87-59-2

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net