**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| |2-(3-Hydroxycarbonyl-2-nitrophenyl) ma| 95+ | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 22 34
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Harmful if swallowed. Causes burns.Corrosive.
Potential Health Effects
Eye:
Causes eye burns. May cause chemical conjunctivitis and corneal
damage.
Skin:
Causes skin burns. May cause skin rash (in milder cases), and cold
and clammy skin with cyanosis or pale color.
Ingestion:
May cause severe and permanent damage to the digestive tract. Causes
gastrointestinal tract burns. May cause perforation of the digestive
tract. May cause systemic effects.
Inhalation:
Causes chemical burns to the respiratory tract. Aspiration may lead
to pulmonary edema. May cause systemic effects.
Chronic:
Effects may be delayed.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately. Do NOT allow victim to rub eyes or keep eyes closed.
Extensive irrigation with water is required (at least 30 minutes).
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes. Wash clothing before reuse. Destroy contaminated shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Do not use mouth-to-mouth resuscitation if victim
ingested or inhaled the substance; induce artificial respiration with
the aid of a pocket mask equipped with a one-way valve or other
proper respiratory medical device.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or appropriate foam.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Clean up spills immediately, observing precautions in the
Protective Equipment section. Provide ventilation.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use only in a well-ventilated area. Do not breathe
dust, vapor, mist, or gas. Do not get in eyes, on skin, or on
clothing. Do not ingest or inhale. Discard contaminated shoes.
Storage:
Corrosives area. Keep containers tightly closed. Store in a cool,
dry area away from incompatible substances.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# :
United Kingdom, WEL - TWA: (listed as tellurium): 0.1 mg/m3 TWA
United Kingdom, WEL - STEL: (listed as tellurium): 0.3 mg/m3 STEL
United States OSHA: 0.1 mg/m3 TWA (listed under Tellurium).
Belgium - TWA: (listed as tellurium): 0.1 mg/m3 VLE
France - VME: (listed as tellurium): 0.1 mg/m3 VME
Germany: (listed as tellurium): 0.1 mg/m3 VME
Malaysia: (listed as tellurium): 0.1 mg/m3 TWA
Netherlands: (listed as tellurium): 0.1 mg/m3 MAC
Russia: (listed as tellurium): 0.01 mg/m3 TWA
Spain: (listed as tellurium): 0.1 mg/m3 VLA-ED
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Solid
Color: cream
Odor: none reported
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: slightly soluble
Specific Gravity/Density: Not available.
Molecular Formula: C10H7NO6
Molecular Weight: 237.17
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, strong oxidants.
Incompatibilities with Other Materials:
No information found..
Hazardous Decomposition Products:
Irritating and toxic fumes and gases.
Hazardous Polymerization: Has not been reported
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
2-(3-Hydroxycarbonyl-2-nitrophenyl) malondialdehyde -
Not listed by ACGIH, IARC, or NTP.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: CORROSIVE SOLID, N.O.S.*
Hazard Class: 8
UN Number: 1759
Packing Group: III
IMO
Shipping Name: CORROSIVE SOLID, N.O.S.
Hazard Class: 8
UN Number: 1759
Packing Group: III
RID/ADR
Shipping Name: CORROSIVE SOLID, N.O.S.
Hazard Class: 8
UN Number: 1759
Packing group: III
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 22 Harmful if swallowed.
R 34 Causes burns.
Safety Phrases:
S 25 Avoid contact with eyes.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# : No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# is not listed on the TSCA inventory.
It is for research and development use only.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 9/02/1997 Revision #4 Date: 3/18/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
Benzo[b]selenophene, 99%
| 272-30-0 |
|
Triton X-100
| 9002-93-1 |
|
N-Chlorosuccinimide, 98+%
| 128-09-6 |
|
Trypsin
| 9002-07-7 |
|
3-(Maleimidomethyl)-Proxyl, Free Radical
| 54060-41-2 |
|
4-Nitro-O-Phenylenediamine, 95% (UV-VIS)
| 99-56-9 |
|
(R)-(+)-1,1'-Bi-2-naphthol, 99%
| 18531-94-7 |
|
Calix[6]Arene, 99% (TLC)
| 96107-95-8 |
|
2-Methylene-3-quinuclidinone hydrochloride dihydrate, 97%
| 5832-55-3 |
|
Tungsten (VI) Oxide
| 1314-35-8 |
|
[Tetra(diphenoxyphosphoryl)]tetra-methylcalix[4]resorcinolarene, 98%
| 160399-36-0 |
|
Allantoin, 98%
| 97-59-6 |
|
Turpentine Oil
| 8006-64-2 |
|
2,6-Dichlorobenzonitrile, 97%
| 1194-65-6 |
|
Methyllithium, low chloride, 1.6 M in diethyl ether (+/- 5% w/v)
| 60-29-7 |
|
Uranine
| 518-47-8 |
|
Lauryl chloride, 99%
| 112-52-7 |
|
2-(3-Hydroxycarbonyl-2-nitrophenyl) malondialdehyde, 95%
| |
|
Ethyl 3,3-Dimethylaminoacrylate, 99+%
| 924-99-2 |
|
DL-4-Chloro-Alpha-Methylphenylacetic Acid, 98%
| 938-95-4 |
|
3-Amino-3-phenylpropionic acid, tech. 90+% remainder dl-phenylalanine
| 150-30-1 |
|
Diethylenetriaminepentaacetic Acid Pentasodium Salt (Techn) (40% in
| 140-01-2 |
|
4-Fluorophenyl isothiocyanate, 98%
| 1544-68-9 |
|
N,N'-Dicarboxymethyldiaza-18-Crown-6, 99+%
| 0-01-1 |
|
Urea
| 57-13-6 |
|
2,6-Dichlorostyrene, 98%
| 28469-92-3 |
|
3-Methyl-2-cyclopenten-1-one, 98%
| 2758-18-1 |
|
1-Methylpyrrolidine, 98%
| 120-94-5 |
|
2-Mercaptothiazoline, 98%
| 96-53-7 |
|
2,4-Dihydroxypyridine, 97%
| 626-03-9 |
|
4-Amino-1-Naphthalenecarbonitrille, 98%
| 58728-64-6 |
|
Diethyl 2-Bromoethylphosphonate, 97%
| 5324-30-1 |
|
Bis(4-Dimethylaminodithiobenzil)Nickel, Laser Grade, 99% (UV-Vis)
| 38465-55-3 |
|
1,1,1-Trifluoro-5,5-Dimethyl-2,4-Hexane-Dione, 99% (GC)
| 22767-90-4 |
|
1-Butanesulfonic acid, sodium salt, 98%
| 2386-54-1 |
|
Malonamide, 97%
| 108-13-4 |
|
Anisoin, 95%
| 119-52-8 |
|
Bismarck Brown Y (Cert)
| 10114-58-6 |
|
Methyl p-tolyl sulfone, 99+%
| 3185-99-7 |
|
Dl-phenylalanine-d11
| |
|
Methyl thioglycolate, 95%
| 2365-48-2 |
|
Vanadyl Sulfate
| 27774-13-6 |
|
6-Hydroxy-2,4,5-triaminopyrimidine Sulfate Hydrate, 98%
| 35011-47-3 |
|
1-Ethynylcyclopentanol, 98%
| 17356-19-3 |
|
Fast Red B Salt
| 27761-26-8 |
|
2-Fluoropyridine, 98%
| 372-48-5 |
|
Benzyl isothiocyanate, 98% (GC)
| 622-78-6 |
|
Cytosine Arabinoside Hydrochloride
| 69-74-9 |
|
Vanillin
| 121-33-5 |
|
2,3-Dimethylaniline, 99%
| 87-59-2 |
|
|